On Fri, Nov 27, 2020 at 12:33:39AM +0900, bongsu.je...@gmail.com wrote:
> From: Bongsu Jeon <bongsu.j...@samsung.com>
>
> Extract the common phy blocks to reuse it.
> The UART module will use the common blocks.
Hi,
Thanks for the patch. Few comments below.
> Signed-off-by: Bongsu Jeon <bongsu.j...@samsung.com>
> ---
> drivers/nfc/s3fwrn5/i2c.c | 111
> ++++++++++++---------------------------
> drivers/nfc/s3fwrn5/phy_common.h | 86 ++++++++++++++++++++++++++++++
> 2 files changed, 119 insertions(+), 78 deletions(-)
> create mode 100644 drivers/nfc/s3fwrn5/phy_common.h
>
> diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
> index 9a64eea..cd1b2a7 100644
> --- a/drivers/nfc/s3fwrn5/i2c.c
> +++ b/drivers/nfc/s3fwrn5/i2c.c
> @@ -15,75 +15,30 @@
>
> #include <net/nfc/nfc.h>
>
> -#include "s3fwrn5.h"
> +#include "phy_common.h"
>
> #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
>
> -#define S3FWRN5_EN_WAIT_TIME 20
> -
> struct s3fwrn5_i2c_phy {
> + struct phy_common common;
> struct i2c_client *i2c_dev;
> - struct nci_dev *ndev;
> -
> - int gpio_en;
> - int gpio_fw_wake;
> -
> - struct mutex mutex;
>
> - enum s3fwrn5_mode mode;
> unsigned int irq_skip:1;
> };
>
> -static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
> -{
> - struct s3fwrn5_i2c_phy *phy = phy_id;
> -
> - mutex_lock(&phy->mutex);
> - gpio_set_value(phy->gpio_fw_wake, wake);
> - msleep(S3FWRN5_EN_WAIT_TIME);
> - mutex_unlock(&phy->mutex);
> -}
> -
> static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
> {
> struct s3fwrn5_i2c_phy *phy = phy_id;
>
> - mutex_lock(&phy->mutex);
> + mutex_lock(&phy->common.mutex);
>
> - if (phy->mode == mode)
> + if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false)
> goto out;
>
> - phy->mode = mode;
> -
> - gpio_set_value(phy->gpio_en, 1);
> - gpio_set_value(phy->gpio_fw_wake, 0);
> - if (mode == S3FWRN5_MODE_FW)
> - gpio_set_value(phy->gpio_fw_wake, 1);
> -
> - if (mode != S3FWRN5_MODE_COLD) {
> - msleep(S3FWRN5_EN_WAIT_TIME);
> - gpio_set_value(phy->gpio_en, 0);
> - msleep(S3FWRN5_EN_WAIT_TIME);
> - }
> -
> phy->irq_skip = true;
>
> out:
> - mutex_unlock(&phy->mutex);
> -}
> -
> -static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
> -{
> - struct s3fwrn5_i2c_phy *phy = phy_id;
> - enum s3fwrn5_mode mode;
> -
> - mutex_lock(&phy->mutex);
> -
> - mode = phy->mode;
> -
> - mutex_unlock(&phy->mutex);
> -
> - return mode;
> + mutex_unlock(&phy->common.mutex);
> }
>
> static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> @@ -91,7 +46,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff
> *skb)
> struct s3fwrn5_i2c_phy *phy = phy_id;
> int ret;
>
> - mutex_lock(&phy->mutex);
> + mutex_lock(&phy->common.mutex);
>
> phy->irq_skip = false;
>
> @@ -102,7 +57,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff
> *skb)
> ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
> }
>
> - mutex_unlock(&phy->mutex);
> + mutex_unlock(&phy->common.mutex);
>
> if (ret < 0)
> return ret;
> @@ -114,9 +69,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff
> *skb)
> }
>
> static const struct s3fwrn5_phy_ops i2c_phy_ops = {
> - .set_wake = s3fwrn5_i2c_set_wake,
> + .set_wake = s3fwrn5_phy_set_wake,
> .set_mode = s3fwrn5_i2c_set_mode,
> - .get_mode = s3fwrn5_i2c_get_mode,
> + .get_mode = s3fwrn5_phy_get_mode,
> .write = s3fwrn5_i2c_write,
> };
>
> @@ -128,7 +83,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> char hdr[4];
> int ret;
>
> - hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
> + hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
> ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
> if (ret < 0)
> @@ -137,7 +92,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> if (ret < hdr_size)
> return -EBADMSG;
>
> - data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
> + data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> ((struct nci_ctrl_hdr *)hdr)->plen :
> ((struct s3fwrn5_fw_header *)hdr)->len;
>
> @@ -157,24 +112,24 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> }
>
> out:
> - return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
> + return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode);
> }
>
> static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
> {
> struct s3fwrn5_i2c_phy *phy = phy_id;
>
> - if (!phy || !phy->ndev) {
> + if (!phy || !phy->common.ndev) {
> WARN_ON_ONCE(1);
> return IRQ_NONE;
> }
>
> - mutex_lock(&phy->mutex);
> + mutex_lock(&phy->common.mutex);
>
> if (phy->irq_skip)
> goto out;
>
> - switch (phy->mode) {
> + switch (phy->common.mode) {
> case S3FWRN5_MODE_NCI:
> case S3FWRN5_MODE_FW:
> s3fwrn5_i2c_read(phy);
> @@ -184,7 +139,7 @@ static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq,
> void *phy_id)
> }
>
> out:
> - mutex_unlock(&phy->mutex);
> + mutex_unlock(&phy->common.mutex);
>
> return IRQ_HANDLED;
> }
> @@ -197,19 +152,19 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client
> *client)
> if (!np)
> return -ENODEV;
>
> - phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> - if (!gpio_is_valid(phy->gpio_en)) {
> + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> + if (!gpio_is_valid(phy->common.gpio_en)) {
> /* Support also deprecated property */
> - phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
> - if (!gpio_is_valid(phy->gpio_en))
> + phy->common.gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios",
> 0);
> + if (!gpio_is_valid(phy->common.gpio_en))
> return -ENODEV;
> }
>
> - phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> - if (!gpio_is_valid(phy->gpio_fw_wake)) {
> + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> + if (!gpio_is_valid(phy->common.gpio_fw_wake)) {
> /* Support also deprecated property */
> - phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios",
> 0);
> - if (!gpio_is_valid(phy->gpio_fw_wake))
> + phy->common.gpio_fw_wake = of_get_named_gpio(np,
> "s3fwrn5,fw-gpios", 0);
The lines here should wrap at 80 character.
> + if (!gpio_is_valid(phy->common.gpio_fw_wake))
> return -ENODEV;
> }
>
> @@ -226,8 +181,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> if (!phy)
> return -ENOMEM;
>
> - mutex_init(&phy->mutex);
> - phy->mode = S3FWRN5_MODE_COLD;
> + mutex_init(&phy->common.mutex);
> + phy->common.mode = S3FWRN5_MODE_COLD;
> phy->irq_skip = true;
>
> phy->i2c_dev = client;
> @@ -237,17 +192,17 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
> - GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en,
> + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> if (ret < 0)
> return ret;
>
> - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
> - GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> + ret = devm_gpio_request_one(&phy->i2c_dev->dev,
> phy->common.gpio_fw_wake,
> + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> if (ret < 0)
> return ret;
>
> - ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
> + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev,
> &i2c_phy_ops);
Please wrap the lines.
> if (ret < 0)
> return ret;
>
> @@ -255,7 +210,7 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> S3FWRN5_I2C_DRIVER_NAME, phy);
> if (ret)
> - s3fwrn5_remove(phy->ndev);
> + s3fwrn5_remove(phy->common.ndev);
>
> return ret;
> }
> @@ -264,7 +219,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client)
> {
> struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
>
> - s3fwrn5_remove(phy->ndev);
> + s3fwrn5_remove(phy->common.ndev);
>
> return 0;
> }
> diff --git a/drivers/nfc/s3fwrn5/phy_common.h
> b/drivers/nfc/s3fwrn5/phy_common.h
> new file mode 100644
> index 0000000..14f7690
> --- /dev/null
> +++ b/drivers/nfc/s3fwrn5/phy_common.h
> @@ -0,0 +1,86 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * Link Layer for Samsung S3FWRN5 NCI based Driver
> + *
> + * Copyright (C) 2015 Samsung Electrnoics
> + * Robert Baldyga <r.bald...@samsung.com>
> + * Copyright (C) 2020 Samsung Electrnoics
> + * Bongsu Jeon <bongsu.j...@samsung.com>
> + */
> +
> +#ifndef __LOCAL_PHY_COMMON_H
> +#define __LOCAL_PHY_COMMON_H
Header guard: __NFC_S3FWRN5_PHY_COMMON_H
> +
> +#include "s3fwrn5.h"
This include should not be needed.
> +
> +#define S3FWRN5_EN_WAIT_TIME 20
> +
> +struct phy_common {
> + struct nci_dev *ndev;
> +
> + int gpio_en;
> + int gpio_fw_wake;
> +
> + struct mutex mutex;
> +
> + enum s3fwrn5_mode mode;
> +};
> +
> +static inline void s3fwrn5_phy_set_wake(void *phy_id, bool wake)
> +{
All these should go to a C source file. If needed - GPL exported.
> + struct phy_common *phy = phy_id;
> +
> + mutex_lock(&phy->mutex);
> + gpio_set_value(phy->gpio_fw_wake, wake);
> + msleep(S3FWRN5_EN_WAIT_TIME);
> + mutex_unlock(&phy->mutex);
> +}
> +
> +static inline bool s3fwrn5_phy_power_ctrl(struct phy_common *phy,
> + enum s3fwrn5_mode mode)
> +{
> + if (phy->mode == mode)
> + return false;
> +
> + phy->mode = mode;
> +
> + gpio_set_value(phy->gpio_en, 1);
> + gpio_set_value(phy->gpio_fw_wake, 0);
> + if (mode == S3FWRN5_MODE_FW)
> + gpio_set_value(phy->gpio_fw_wake, 1);
> +
> + if (mode != S3FWRN5_MODE_COLD) {
> + msleep(S3FWRN5_EN_WAIT_TIME);
> + gpio_set_value(phy->gpio_en, 0);
> + msleep(S3FWRN5_EN_WAIT_TIME);
> + }
> +
> + return true;
> +}
> +
> +static inline void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode)
> +{
This looks unused. If you need it only for your next chip, add it with
next patch (the patch adding the user).
Best regards,
Krzysztof
