[PATCH net-next 03/15] net: phy: icplus: implement generic .handle_interrupt() callback

[Ioana Ciornei]

From: Ioana Ciornei <ioana.cior...@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
Signed-off-by: Ioana Ciornei <ioana.cior...@nxp.com>
---
 drivers/net/phy/icplus.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index d6e8516cd146..a74ff45fa99c 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -285,16 +285,24 @@ static int ip101a_g_config_intr(struct phy_device *phydev)
        return phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
 }
 
-static int ip101a_g_did_interrupt(struct phy_device *phydev)
+static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)
 {
-       int val = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+       int irq_status;
 
-       if (val < 0)
-               return 0;
+       irq_status = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+       if (irq_status < 0) {
+               phy_error(phydev);
+               return IRQ_NONE;
+       }
+
+       if (!(irq_status & (IP101A_G_IRQ_SPEED_CHANGE |
+                           IP101A_G_IRQ_DUPLEX_CHANGE |
+                           IP101A_G_IRQ_LINK_CHANGE)))
+               return IRQ_NONE;
+
+       phy_trigger_machine(phydev);
 
-       return val & (IP101A_G_IRQ_SPEED_CHANGE |
-                     IP101A_G_IRQ_DUPLEX_CHANGE |
-                     IP101A_G_IRQ_LINK_CHANGE);
+       return IRQ_HANDLED;
 }
 
 static int ip101a_g_ack_interrupt(struct phy_device *phydev)
@@ -332,8 +340,8 @@ static struct phy_driver icplus_driver[] = {
        /* PHY_BASIC_FEATURES */
        .probe          = ip101a_g_probe,
        .config_intr    = ip101a_g_config_intr,
-       .did_interrupt  = ip101a_g_did_interrupt,
        .ack_interrupt  = ip101a_g_ack_interrupt,
+       .handle_interrupt = ip101a_g_handle_interrupt,
        .config_init    = &ip101a_g_config_init,
        .suspend        = genphy_suspend,
        .resume         = genphy_resume,
-- 
2.28.0