When stopping an AP RX channel, there can be a transient period
while the channel enters STOP_IN_PROC state before reaching the
final STOPPED state.  In that case we make another attempt to stop
the channel.

Similarly, when stopping a modem channel (using a GSI generic
command issued from the AP), it's possible that multiple attempts
will be required before the channel reaches STOPPED state.

Add a field to the GSI structure to record an errno representing the
result code provided when a generic command completes.  If the
result learned in gsi_isr_gp_int1() is RETRY, record -EAGAIN in the
result code, otherwise record 0 for success, or -EIO for any other
result.

If we time out nf gsi_generic_command() waiting for the command to
complete, return -ETIMEDOUT (as before).  Otherwise return the
result stashed by gsi_isr_gp_int1().

Add a loop in gsi_modem_channel_halt() to reissue the HALT command
if the result code indicates -EAGAIN.  Limit this to 10 retries
(after the initial attempt).

Signed-off-by: Alex Elder <el...@linaro.org>
---
 drivers/net/ipa/gsi.c | 21 +++++++++++++++++++--
 drivers/net/ipa/gsi.h |  1 +
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 7c2e820625590..eb4c5d408a835 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -92,6 +92,7 @@
 #define GSI_CMD_TIMEOUT                        5       /* seconds */
 
 #define GSI_CHANNEL_STOP_RX_RETRIES    10
+#define GSI_CHANNEL_MODEM_HALT_RETRIES 10
 
 #define GSI_MHI_EVENT_ID_START         10      /* 1st reserved event id */
 #define GSI_MHI_EVENT_ID_END           16      /* Last reserved event id */
@@ -1107,10 +1108,16 @@ static void gsi_isr_gp_int1(struct gsi *gsi)
        switch (result) {
        case GENERIC_EE_SUCCESS:
        case GENERIC_EE_CHANNEL_NOT_RUNNING:
+               gsi->result = 0;
+               break;
+
+       case GENERIC_EE_RETRY:
+               gsi->result = -EAGAIN;
                break;
 
        default:
                dev_err(gsi->dev, "global INT1 generic result %u\n", result);
+               gsi->result = -EIO;
                break;
        }
 
@@ -1624,7 +1631,7 @@ static int gsi_generic_command(struct gsi *gsi, u32 
channel_id,
        iowrite32(BIT(ERROR_INT), gsi->virt + GSI_CNTXT_GLOB_IRQ_EN_OFFSET);
 
        if (success)
-               return 0;
+               return gsi->result;
 
        dev_err(gsi->dev, "GSI generic command %u to channel %u timed out\n",
                opcode, channel_id);
@@ -1640,7 +1647,17 @@ static int gsi_modem_channel_alloc(struct gsi *gsi, u32 
channel_id)
 
 static void gsi_modem_channel_halt(struct gsi *gsi, u32 channel_id)
 {
-       (void)gsi_generic_command(gsi, channel_id, GSI_GENERIC_HALT_CHANNEL);
+       u32 retries = GSI_CHANNEL_MODEM_HALT_RETRIES;
+       int ret;
+
+       do
+               ret = gsi_generic_command(gsi, channel_id,
+                                         GSI_GENERIC_HALT_CHANNEL);
+       while (ret == -EAGAIN && retries--);
+
+       if (ret)
+               dev_err(gsi->dev, "error %d halting modem channel %u\n",
+                       ret, channel_id);
 }
 
 /* Setup function for channels */
diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
index ecc784e3a8127..96c9aed397aad 100644
--- a/drivers/net/ipa/gsi.h
+++ b/drivers/net/ipa/gsi.h
@@ -161,6 +161,7 @@ struct gsi {
        u32 type_enabled_bitmap;        /* GSI IRQ types enabled */
        u32 ieob_enabled_bitmap;        /* IEOB IRQ enabled (event rings) */
        struct completion completion;   /* for global EE commands */
+       int result;                     /* Negative errno (generic commands) */
        struct mutex mutex;             /* protects commands, programming */
 };
 
-- 
2.20.1

Reply via email to