Am 18.11.2020 um 22:59 schrieb Shay Agroskin:
> The ENA driver uses the readless mechanism, which uses DMA, to find
> out what the DMA mask is supposed to be.
>
> If DMA is used without setting the dma_mask first, it causes the
> Intel IOMMU driver to think that ENA is a 32-bit device and therefore
> disables IOMMU passthrough permanently.
>
> This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48
> before readless initialization in
> ena_device_init()->ena_com_mmio_reg_read_request_init(),
> which is large enough to workaround the intel_iommu issue.
>
> DMA mask is set again to the correct value after it's received from the
> device after readless is initialized.
>
> Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network
> Adapters (ENA)")
> Signed-off-by: Mike Cui <[email protected]>
> Signed-off-by: Arthur Kiyanovski <[email protected]>
> Signed-off-by: Shay Agroskin <[email protected]>
> ---
> drivers/net/ethernet/amazon/ena/ena_netdev.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c
> b/drivers/net/ethernet/amazon/ena/ena_netdev.c
> index 574c2b5ba21e..854a22e692bf 100644
> --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
> +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
> @@ -4146,6 +4146,19 @@ static int ena_probe(struct pci_dev *pdev, const
> struct pci_device_id *ent)
> return rc;
> }
>
> + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(ENA_MAX_PHYS_ADDR_SIZE_BITS));
> + if (rc) {
> + dev_err(&pdev->dev, "pci_set_dma_mask failed %d\n", rc);
> + goto err_disable_device;
> + }
> +
> + rc = pci_set_consistent_dma_mask(pdev,
> DMA_BIT_MASK(ENA_MAX_PHYS_ADDR_SIZE_BITS));
> + if (rc) {
> + dev_err(&pdev->dev, "err_pci_set_consistent_dma_mask failed
> %d\n",
> + rc);
> + goto err_disable_device;
> + }
> +
> pci_set_master(pdev);
>
> ena_dev = vzalloc(sizeof(*ena_dev));
>
The old pci_ dma wrappers are being phased out and shouldn't be used in
new code. See e.g. e059c6f340f6 ("tulip: switch from 'pci_' to 'dma_' API").
So better use:
dma_set_mask_and_coherent(&pdev->dev,
DMA_BIT_MASK(ENA_MAX_PHYS_ADDR_SIZE_BITS));
