The link mode is a combination of port speed and port mode. But we
currently only consider the speed, and then typically select the
corresponding TP-based link mode. For 1G and 10G Fibre links this means
we display the wrong link modes.
Move the SPEED_* switch statements inside the PORT_* cases, and only
consider valid combinations where we can select the corresponding
link mode. Add the relevant link modes (1000baseX, 10000baseSR and
1000baseLR) that were introduced back with
commit 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G
link modes").
To differentiate between 10000baseSR and 10000baseLR, use the detailed
media_type information that QUERY OAT provides.
Signed-off-by: Julian Wiedmann <j...@linux.ibm.com>
---
drivers/s390/net/qeth_core.h | 7 ++
drivers/s390/net/qeth_core_main.c | 11 +++
drivers/s390/net/qeth_ethtool.c | 124 ++++++++++++++++++------------
3 files changed, 93 insertions(+), 49 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index c604e20a5e48..9e00917286a5 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -701,10 +701,17 @@ enum qeth_pnso_mode {
QETH_PNSO_ADDR_INFO,
};
+enum qeth_link_mode {
+ QETH_LINK_MODE_UNKNOWN,
+ QETH_LINK_MODE_FIBRE_SHORT,
+ QETH_LINK_MODE_FIBRE_LONG,
+};
+
struct qeth_link_info {
u32 speed;
u8 duplex;
u8 port;
+ enum qeth_link_mode link_mode;
};
#define QETH_BROADCAST_WITH_ECHO 0x01
diff --git a/drivers/s390/net/qeth_core_main.c
b/drivers/s390/net/qeth_core_main.c
index 57dad31aab4d..2752a585849d 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5017,13 +5017,19 @@ static int qeth_init_link_info_oat_cb(struct qeth_card
*card,
switch (phys_if->media_type) {
case QETH_QOAT_PHYS_MEDIA_COPPER:
link_info->port = PORT_TP;
+ link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
break;
case QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT:
+ link_info->port = PORT_FIBRE;
+ link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;
+ break;
case QETH_QOAT_PHYS_MEDIA_FIBRE_LONG:
link_info->port = PORT_FIBRE;
+ link_info->link_mode = QETH_LINK_MODE_FIBRE_LONG;
break;
default:
link_info->port = PORT_OTHER;
+ link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
break;
}
@@ -5037,6 +5043,7 @@ static void qeth_init_link_info(struct qeth_card *card)
if (IS_IQD(card) || IS_VM_NIC(card)) {
card->info.link_info.speed = SPEED_10000;
card->info.link_info.port = PORT_FIBRE;
+ card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;
} else {
switch (card->info.link_type) {
case QETH_LINK_TYPE_FAST_ETH:
@@ -5063,6 +5070,8 @@ static void qeth_init_link_info(struct qeth_card *card)
card->info.link_info.speed = SPEED_UNKNOWN;
card->info.link_info.port = PORT_OTHER;
}
+
+ card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;
}
/* Get more accurate data via QUERY OAT: */
@@ -5088,6 +5097,8 @@ static void qeth_init_link_info(struct qeth_card *card)
card->info.link_info.duplex =
link_info.duplex;
if (link_info.port != PORT_OTHER)
card->info.link_info.port =
link_info.port;
+ if (link_info.link_mode !=
QETH_LINK_MODE_UNKNOWN)
+ card->info.link_info.link_mode =
link_info.link_mode;
}
}
}
diff --git a/drivers/s390/net/qeth_ethtool.c b/drivers/s390/net/qeth_ethtool.c
index 50b0c1810850..3a51bbff0ffe 100644
--- a/drivers/s390/net/qeth_ethtool.c
+++ b/drivers/s390/net/qeth_ethtool.c
@@ -324,7 +324,8 @@ static int qeth_set_per_queue_coalesce(struct net_device
*dev, u32 queue,
/* Autoneg and full-duplex are supported and advertised unconditionally. */
/* Always advertise and support all speeds up to specified, and only one */
/* specified port type.
*/
-static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)
+static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd,
+ enum qeth_link_mode link_mode)
{
ethtool_link_ksettings_zero_link_mode(cmd, supported);
ethtool_link_ksettings_zero_link_mode(cmd, advertising);
@@ -337,58 +338,83 @@ static void qeth_set_ethtool_link_modes(struct
ethtool_link_ksettings *cmd)
case PORT_TP:
ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
+
+ switch (cmd->base.speed) {
+ case SPEED_10000:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 10000baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 10000baseT_Full);
+ fallthrough;
+ case SPEED_1000:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 1000baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 1000baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 1000baseT_Half);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 1000baseT_Half);
+ fallthrough;
+ case SPEED_100:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 100baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 100baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 100baseT_Half);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 100baseT_Half);
+ fallthrough;
+ case SPEED_10:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 10baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 10baseT_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 10baseT_Half);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 10baseT_Half);
+ break;
+ default:
+ break;
+ }
+
break;
case PORT_FIBRE:
ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
- break;
- default:
- break;
- }
- /* partially does fall through, to also select lower speeds */
- switch (cmd->base.speed) {
- case SPEED_25000:
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 25000baseSR_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 25000baseSR_Full);
- break;
- case SPEED_10000:
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 10000baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 10000baseT_Full);
- fallthrough;
- case SPEED_1000:
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 1000baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 1000baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 1000baseT_Half);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 1000baseT_Half);
- fallthrough;
- case SPEED_100:
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 100baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 100baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 100baseT_Half);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 100baseT_Half);
- fallthrough;
- case SPEED_10:
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 10baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 10baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, supported,
- 10baseT_Half);
- ethtool_link_ksettings_add_link_mode(cmd, advertising,
- 10baseT_Half);
+ switch (cmd->base.speed) {
+ case SPEED_25000:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 25000baseSR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 25000baseSR_Full);
+ break;
+ case SPEED_10000:
+ if (link_mode == QETH_LINK_MODE_FIBRE_LONG) {
+ ethtool_link_ksettings_add_link_mode(cmd,
supported,
+
10000baseLR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd,
advertising,
+
10000baseLR_Full);
+ } else if (link_mode == QETH_LINK_MODE_FIBRE_SHORT) {
+ ethtool_link_ksettings_add_link_mode(cmd,
supported,
+
10000baseSR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd,
advertising,
+
10000baseSR_Full);
+ }
+ break;
+ case SPEED_1000:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 1000baseX_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 1000baseX_Full);
+ break;
+ default:
+ break;
+ }
+
break;
default:
break;
@@ -420,7 +446,7 @@ static int qeth_get_link_ksettings(struct net_device
*netdev,
cmd->base.port = link_info.port;
}
- qeth_set_ethtool_link_modes(cmd);
+ qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);
return 0;
}
--
2.17.1
