We had to remove flag IRQF_NO_THREAD because it conflicts with shared interrupts in case legacy interrupts are used. Following up on the linked discussion set IRQF_NO_THREAD if MSI or MSI-X is used, because both guarantee that interrupt won't be shared.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com> Link: https://www.spinics.net/lists/netdev/msg695341.html --- drivers/net/ethernet/realtek/r8169_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 319399a03..4d6afaf7c 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4690,6 +4690,7 @@ static int rtl_open(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); struct pci_dev *pdev = tp->pci_dev; + unsigned long irqflags; int retval = -ENOMEM; pm_runtime_get_sync(&pdev->dev); @@ -4714,8 +4715,9 @@ static int rtl_open(struct net_device *dev) rtl_request_firmware(tp); + irqflags = pci_dev_msi_enabled(pdev) ? IRQF_NO_THREAD : IRQF_SHARED; retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt, - IRQF_SHARED, dev->name, tp); + irqflags, dev->name, tp); if (retval < 0) goto err_release_fw_2; -- 2.29.2
