From: Tom Rix <t...@redhat.com>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <t...@redhat.com>
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index de7692b763d8..771f58f50d61 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -558,7 +558,7 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t
interface)
val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
break;
- };
+ }
/* Set feedback divide ratio update signal to high */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
--
2.18.1
