Checksum update was missing in the WR. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Rohit Maheshwari <roh...@chelsio.com> --- .../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 21 ++++++++++++------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index 447aec7ae954..a1448a1b38fd 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -947,18 +947,17 @@ static int chcr_ktls_write_tcp_options(struct chcr_ktls_info *tx_info, struct sk_buff *skb, struct sge_eth_txq *q, uint32_t tx_chan) { + u32 ctrl, iplen, maclen, pktlen, ndesc, len16; struct fw_eth_tx_pkt_wr *wr; struct cpl_tx_pkt_core *cpl; - u32 ctrl, iplen, maclen; #if IS_ENABLED(CONFIG_IPV6) struct ipv6hdr *ip6; #endif - unsigned int ndesc; struct tcphdr *tcp; - int len16, pktlen; + u8 buf[150] = {0}; struct iphdr *ip; int credits; - u8 buf[150]; + u64 cntrl1; void *pos; iplen = skb_network_header_len(skb); @@ -997,22 +996,28 @@ chcr_ktls_write_tcp_options(struct chcr_ktls_info *tx_info, struct sk_buff *skb, TXPKT_PF_V(tx_info->adap->pf)); cpl->pack = 0; cpl->len = htons(pktlen); - /* checksum offload */ - cpl->ctrl1 = 0; - - pos = cpl + 1; memcpy(buf, skb->data, pktlen); if (tx_info->ip_family == AF_INET) { /* we need to correct ip header len */ ip = (struct iphdr *)(buf + maclen); ip->tot_len = htons(pktlen - maclen); + cntrl1 = TXPKT_CSUM_TYPE_V(TX_CSUM_TCPIP); #if IS_ENABLED(CONFIG_IPV6) } else { ip6 = (struct ipv6hdr *)(buf + maclen); ip6->payload_len = htons(pktlen - maclen - iplen); + cntrl1 = TXPKT_CSUM_TYPE_V(TX_CSUM_TCPIP6); #endif } + + cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) | + TXPKT_IPHDR_LEN_V(iplen); + /* checksum offload */ + cpl->ctrl1 = cpu_to_be64(cntrl1); + + pos = cpl + 1; + /* now take care of the tcp header, if fin is not set then clear push * bit as well, and if fin is set, it will be sent at the last so we * need to update the tcp sequence number as per the last packet. -- 2.18.1