phy-handle can't be handled well for ast2400/2500 which has an embedded
MDIO controller. Add ftgmac100_mdio_setup for ast2400/2500 and initialize
PHYs from mdio child node with of_mdiobus_register.
Signed-off-by: Ivan Mikhaylov <i.mikhay...@yadro.com>
---
drivers/net/ethernet/faraday/ftgmac100.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
b/drivers/net/ethernet/faraday/ftgmac100.c
index ffad79050713..62bafd4b22e1 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1631,6 +1631,7 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
struct ftgmac100 *priv = netdev_priv(netdev);
struct platform_device *pdev = to_platform_device(priv->dev);
struct device_node *np = pdev->dev.of_node;
+ struct device_node *mdio_np;
int i, err = 0;
u32 reg;
@@ -1662,12 +1663,16 @@ static int ftgmac100_setup_mdio(struct net_device
*netdev)
for (i = 0; i < PHY_MAX_ADDR; i++)
priv->mii_bus->irq[i] = PHY_POLL;
- err = mdiobus_register(priv->mii_bus);
+ mdio_np = of_get_child_by_name(np, "mdio");
+
+ err = of_mdiobus_register(priv->mii_bus, mdio_np);
if (err) {
dev_err(priv->dev, "Cannot register MDIO bus!\n");
goto err_register_mdiobus;
}
+ of_node_put(mdio_np);
+
return 0;
err_register_mdiobus:
@@ -1830,11 +1835,22 @@ static int ftgmac100_probe(struct platform_device *pdev)
} else if (np && of_get_property(np, "phy-handle", NULL)) {
struct phy_device *phy;
+ /* Support "mdio"/"phy" child nodes for ast2400/2500 with
+ * an embedded MDIO controller. Automatically scan the DTS for
+ * available PHYs and register them.
+ */
+ if (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
+ of_device_is_compatible(np, "aspeed,ast2500-mac")) {
+ err = ftgmac100_setup_mdio(netdev);
+ if (err)
+ goto err_setup_mdio;
+ }
+
phy = of_phy_get_and_connect(priv->netdev, np,
&ftgmac100_adjust_link);
if (!phy) {
dev_err(&pdev->dev, "Failed to connect to phy\n");
- goto err_setup_mdio;
+ goto err_phy_connect;
}
/* Indicate that we support PAUSE frames (see comment in
--
2.21.1
