The driver does not implement a shutdown handler which leads to issues
when using kexec in certain scenarios. The NIC keeps on fetching
descriptors which gets flagged by the IOMMU with errors like this:
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
Signed-off-by: Moritz Fischer <m...@kernel.org>
---
Changes from v1:
- Replace call to de_remove_one with de_shutdown() function
as suggested by James.
---
drivers/net/ethernet/dec/tulip/de2104x.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c
b/drivers/net/ethernet/dec/tulip/de2104x.c
index f1a2da15dd0a..6de0cd6cf4ca 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -2180,11 +2180,19 @@ static int de_resume (struct pci_dev *pdev)
#endif /* CONFIG_PM */
+static void de_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ de_close(dev);
+}
+
static struct pci_driver de_driver = {
.name = DRV_NAME,
.id_table = de_pci_tbl,
.probe = de_init_one,
.remove = de_remove_one,
+ .shutdown = de_shutdown,
#ifdef CONFIG_PM
.suspend = de_suspend,
.resume = de_resume,
--
2.28.0
