On Thu, Oct 15, 2020 at 03:49:16PM +0300, Ivan Mikhaylov wrote:
> Split MDIO registration and PHY connect into ftgmac100_setup_mdio and
> ftgmac100_mii_probe.
>
> Signed-off-by: Ivan Mikhaylov <i.mikhay...@yadro.com>
> ---
> drivers/net/ethernet/faraday/ftgmac100.c | 92 ++++++++++++------------
> 1 file changed, 47 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
> b/drivers/net/ethernet/faraday/ftgmac100.c
> index 87236206366f..6997e121824b 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -1044,11 +1044,47 @@ static void ftgmac100_adjust_link(struct net_device
> *netdev)
> schedule_work(&priv->reset_task);
> }
>
> -static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf)
> +static int ftgmac100_mii_probe(struct net_device *netdev)
> {
> - struct net_device *netdev = priv->netdev;
> + struct ftgmac100 *priv = netdev_priv(netdev);
> + struct platform_device *pdev = to_platform_device(priv->dev);
> + struct device_node *np = pdev->dev.of_node;
> + phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII;
> struct phy_device *phydev;
Reverse Christmas tree.
>
> + /* Get PHY mode from device-tree */
> + if (np) {
> + /* Default to RGMII. It's a gigabit part after all */
> + phy_intf = of_get_phy_mode(np, &phy_intf);
> + if (phy_intf < 0)
> + phy_intf = PHY_INTERFACE_MODE_RGMII;
I know you are just moving code around, but it is better to do:
> + err = of_get_phy_mode(np, &phy_intf);
> + if (err)
> + phy_intf = PHY_INTERFACE_MODE_RGMII;
With the code you have, you are probably going to get an email about
assigning an int to an unsigned int type from Colin..
> @@ -1860,6 +1854,14 @@ static int ftgmac100_probe(struct platform_device
> *pdev)
> err = ftgmac100_setup_mdio(netdev);
> if (err)
> goto err_setup_mdio;
> +
> + err = ftgmac100_mii_probe(netdev);
> + if (err) {
> + dev_err(priv->dev, "MII probe failed!\n");
> + mdiobus_unregister(priv->mii_bus);
> + goto err_setup_mdio;
> + }
It is more uniform to add a new label and add the
mdiobus_unregister(priv->mii_bus) there. All the other error handling
works like that.
Andrew
