On Thu, Oct 08, 2020 at 10:34:11AM +0200, Kurt Kanzenbach wrote: > On Wed Oct 07 2020, Vladimir Oltean wrote: > > On Wed, Oct 07, 2020 at 12:39:49PM +0200, Kurt Kanzenbach wrote: > >> For instance the hellcreek switch has actually three ptp hardware > >> clocks and the time stamping can be configured to use either one of > >> them. > > > > The sja1105 also has a corrected and an uncorrected PTP clock that can > > take timestamps. Initially I had thought I'd be going to spend some time > > figuring out multi-PHC support, but now I don't see any practical reason > > to use the uncorrected PHC for anything. > > Just out of curiosity: How do you implement 802.1AS then? My > understanding is that the free-running clock has to be used for the
Has to be? I couldn't find that wording in IEEE 802.1AS-2011. > calculation of the peer delays and such meaning there should be a way to > get access to both PHCs or having some form of cross timestamping > available. > > The hellcreek switch can take cross snapshots of all three ptp clocks in > hardware for that purpose. Well, at the end of the day, all the other TSN offloads (tc-taprio, tc-gate) will still have to use the synchronized PTP clock, so what we're doing is we're simply letting that clock be synchronized by ptp4l. > >> > So when you'll poll for TX timestamps, you'll receive a TX > >> > timestamp from the PHY and another one from the switch, and those will > >> > be in a race with one another, so you won't know which one is which. > >> > >> OK. So what happens if the driver will accept to disable hardware > >> timestamping? Is there anything else that needs to be implemented? Are > >> there (good) examples? > > > > It needs to not call skb_complete_tx_timestamp() and friends. > > > > For PHY timestamping, it also needs to invoke the correct methods for RX > > and for TX, where the PHY timestamping hooks will get called. I don't > > think that DSA is compatible yet with PHY timestamping, but it is > > probably a trivial modification. > > Hmm? If DSA doesn't support PHY timestamping how are other DSA drivers > dealing with it then? I'm getting really confused. They aren't dealing with it, of course. > Furthermore, there is no hellcreek hardware available with timestamping > capable PHYs. How am I supposed to even test this? > > For now, until there is hardware available, PHY timestamping is not > supported with the hellcreek switch. I was just pointing out that this is something you'll certainly have to change if somebody will want PHY timestamping. Even without hardware, you _could_ probably test that DSA is doing the right thing by simply adding the PTP timestamping ops to a PHY driver that you own, and inject dummy timestamps. The expectation becomes that user space gets those dummy timestamps, and not the ones emitted by your switch.
