Thu, Oct 01, 2020 at 03:59:07PM CEST, mo...@mellanox.com wrote:
>Add reload stats to hold the history per reload action type and limit.
>
>For example, the number of times fw_activate has been performed on this
>device since the driver module was added or if the firmware activation
>was performed with or without reset.
>
>Add devlink notification on stats update.
>
>Expose devlink reload stats to the user through devlink dev get command.
>
>Examples:
>$ devlink dev show
>pci/0000:82:00.0:
>  stats:
>      reload_stats:
>        driver_reinit 2
>        fw_activate 1
>        fw_activate_no_reset 0
>pci/0000:82:00.1:
>  stats:
>      reload_stats:
>        driver_reinit 1
>        fw_activate 0
>        fw_activate_no_reset 0
>
>$ devlink dev show -jp
>{
>    "dev": {
>        "pci/0000:82:00.0": {
>            "stats": {
>                "reload_stats": [ {

Just "reload". No need to repeat "stats" here.


>                        "driver_reinit": 2
>                    },{
>                        "fw_activate": 1
>                    },{
>                        "fw_activate_no_reset": 0
>                    } ]
>            }
>        },
>        "pci/0000:82:00.1": {
>            "stats": {
>                "reload_stats": [ {
>                        "driver_reinit": 1
>                    },{
>                        "fw_activate": 0
>                    },{
>                        "fw_activate_no_reset": 0
>                    } ]
>            }
>        }
>    }
>}
>
>Signed-off-by: Moshe Shemesh <mo...@mellanox.com>
>---
>RFCv5 -> v1:
>- Changed the stats output structure, have 2 stats, one for local and
>one for remote
>- Resplit this patch and the next one by remote/local reload stast
>instead of set/get reload stats
>- Add helper function devlink_reload_stats_put()
>RFCv4 -> RFCv5:
>- Add separate reload action stats for updating on remote actions
>- Protect  from updating remote actions stats during reload_down()/up()
>RFCv3 -> RFCv4:
>- Renamed reload_actions_cnts to reload_action_stats
>- Add devlink notifications on stats update
>- Renamed devlink_reload_actions_implicit_actions_performed() and add
>  function comment in code
>RFCv2 -> RFCv3:
>- New patch
>---
> include/net/devlink.h        |  7 +++
> include/uapi/linux/devlink.h |  5 ++
> net/core/devlink.c           | 97 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 109 insertions(+)
>
>diff --git a/include/net/devlink.h b/include/net/devlink.h
>index 43dde69086e5..0f3bd23b6c04 100644
>--- a/include/net/devlink.h
>+++ b/include/net/devlink.h
>@@ -20,6 +20,9 @@
> #include <uapi/linux/devlink.h>
> #include <linux/xarray.h>
> 
>+#define DEVLINK_RELOAD_STATS_ARRAY_SIZE \
>+      (__DEVLINK_RELOAD_LIMIT_MAX * __DEVLINK_RELOAD_ACTION_MAX)
>+
> struct devlink_ops;
> 
> struct devlink {
>@@ -38,6 +41,7 @@ struct devlink {
>       struct list_head trap_policer_list;
>       const struct devlink_ops *ops;
>       struct xarray snapshot_ids;
>+      u32 reload_stats[DEVLINK_RELOAD_STATS_ARRAY_SIZE];
>       struct device *dev;
>       possible_net_t _net;
>       struct mutex lock; /* Serializes access to devlink instance specific 
> objects such as
>@@ -1470,6 +1474,9 @@ void
> devlink_health_reporter_recovery_done(struct devlink_health_reporter 
> *reporter);
> 
> bool devlink_is_reload_failed(const struct devlink *devlink);
>+void devlink_remote_reload_actions_performed(struct devlink *devlink,
>+                                           enum devlink_reload_limit limit,
>+                                           unsigned long actions_performed);

Leftover, please remove/move.


> 
> void devlink_flash_update_begin_notify(struct devlink *devlink);
> void devlink_flash_update_end_notify(struct devlink *devlink);
>diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
>index cc5dc4c07b4a..97e0137f6201 100644
>--- a/include/uapi/linux/devlink.h
>+++ b/include/uapi/linux/devlink.h
>@@ -526,6 +526,11 @@ enum devlink_attr {
>       DEVLINK_ATTR_RELOAD_ACTIONS_PERFORMED,  /* u64 */
>       DEVLINK_ATTR_RELOAD_LIMIT,      /* u8 */
> 
>+      DEVLINK_ATTR_DEV_STATS,                 /* nested */
>+      DEVLINK_ATTR_RELOAD_STATS,              /* nested */
>+      DEVLINK_ATTR_RELOAD_STATS_ENTRY,        /* nested */
>+      DEVLINK_ATTR_RELOAD_STATS_VALUE,        /* u32 */
>+
>       /* add new attributes above here, update the policy in devlink.c */
> 
>       __DEVLINK_ATTR_MAX,
>diff --git a/net/core/devlink.c b/net/core/devlink.c
>index 6de7d6aa6ed1..05516f1e4c3e 100644
>--- a/net/core/devlink.c
>+++ b/net/core/devlink.c
>@@ -500,10 +500,68 @@ devlink_reload_limit_is_supported(struct devlink 
>*devlink, enum devlink_reload_l
>       return test_bit(limit, &devlink->ops->reload_limits);
> }
> 
>+static int devlink_reload_stat_put(struct sk_buff *msg, enum 
>devlink_reload_action action,
>+                                 enum devlink_reload_limit limit, u32 value)
>+{
>+      struct nlattr *reload_stats_entry;
>+
>+      reload_stats_entry = nla_nest_start(msg, 
>DEVLINK_ATTR_RELOAD_STATS_ENTRY);
>+      if (!reload_stats_entry)
>+              return -EMSGSIZE;
>+
>+      if (nla_put_u8(msg, DEVLINK_ATTR_RELOAD_ACTION, action))
>+              goto nla_put_failure;
>+      if (nla_put_u8(msg, DEVLINK_ATTR_RELOAD_LIMIT, limit))
>+              goto nla_put_failure;
>+      if (nla_put_u32(msg, DEVLINK_ATTR_RELOAD_STATS_VALUE, value))
>+              goto nla_put_failure;
>+      nla_nest_end(msg, reload_stats_entry);
>+      return 0;
>+
>+nla_put_failure:
>+      nla_nest_cancel(msg, reload_stats_entry);
>+      return -EMSGSIZE;
>+}
>+
>+static int devlink_reload_stats_put(struct sk_buff *msg, struct devlink 
>*devlink)
>+{
>+      struct nlattr *reload_stats_attr;
>+      int i, j, stat_idx;
>+      u32 value;
>+
>+      reload_stats_attr = nla_nest_start(msg, DEVLINK_ATTR_RELOAD_STATS);
>+
>+      if (!reload_stats_attr)
>+              return -EMSGSIZE;
>+
>+      for (j = 0; j <= DEVLINK_RELOAD_LIMIT_MAX; j++) {
>+              if (j != DEVLINK_RELOAD_LIMIT_UNSPEC &&

You should check limit_unspec during driver register, not here.


>+                  !devlink_reload_limit_is_supported(devlink, j))
>+                      continue;
>+              for (i = 0; i <= DEVLINK_RELOAD_ACTION_MAX; i++) {
>+                      if (!devlink_reload_action_is_supported(devlink, i) ||
>+                          devlink_reload_combination_is_invalid(i, j))
>+                              continue;
>+
>+                      stat_idx = j * __DEVLINK_RELOAD_ACTION_MAX + i;
>+                      value = devlink->reload_stats[stat_idx];
>+                      if (devlink_reload_stat_put(msg, i, j, value))
>+                              goto nla_put_failure;
>+              }
>+      }
>+      nla_nest_end(msg, reload_stats_attr);
>+      return 0;
>+
>+nla_put_failure:
>+      nla_nest_cancel(msg, reload_stats_attr);
>+      return -EMSGSIZE;
>+}
>+
> static int devlink_nl_fill(struct sk_buff *msg, struct devlink *devlink,
>                          enum devlink_command cmd, u32 portid,
>                          u32 seq, int flags)
> {
>+      struct nlattr *dev_stats;
>       void *hdr;
> 
>       hdr = genlmsg_put(msg, portid, seq, &devlink_nl_family, flags, cmd);
>@@ -515,9 +573,19 @@ static int devlink_nl_fill(struct sk_buff *msg, struct 
>devlink *devlink,
>       if (nla_put_u8(msg, DEVLINK_ATTR_RELOAD_FAILED, devlink->reload_failed))
>               goto nla_put_failure;
> 
>+      dev_stats = nla_nest_start(msg, DEVLINK_ATTR_DEV_STATS);

Avoid the "DEV". Just "DEVLINK_ATTR_STATS" is enough.


>+      if (!dev_stats)
>+              goto nla_put_failure;
>+
>+      if (devlink_reload_stats_put(msg, devlink))
>+              goto dev_stats_nest_cancel;
>+
>+      nla_nest_end(msg, dev_stats);
>       genlmsg_end(msg, hdr);
>       return 0;
> 
>+dev_stats_nest_cancel:
>+      nla_nest_cancel(msg, dev_stats);
> nla_put_failure:
>       genlmsg_cancel(msg, hdr);
>       return -EMSGSIZE;
>@@ -3004,6 +3072,34 @@ bool devlink_is_reload_failed(const struct devlink 
>*devlink)
> }
> EXPORT_SYMBOL_GPL(devlink_is_reload_failed);
> 
>+static void
>+__devlink_reload_stats_update(struct devlink *devlink, u32 *reload_stats,
>+                            enum devlink_reload_limit limit, unsigned long 
>actions_performed)
>+{
>+      int stat_idx;
>+      int action;
>+
>+      if (!actions_performed)
>+              return;
>+
>+      if (WARN_ON(limit > DEVLINK_RELOAD_LIMIT_MAX))

I don't understand the reason for this check and warn on. You should
sanitize this in the caller (I think you already do that).

>+              return;
>+      for (action = 0; action <= DEVLINK_RELOAD_ACTION_MAX; action++) {
>+              if (!test_bit(action, &actions_performed))
>+                      continue;
>+              stat_idx = limit * __DEVLINK_RELOAD_ACTION_MAX + action;
>+              reload_stats[stat_idx]++;
>+      }
>+      devlink_notify(devlink, DEVLINK_CMD_NEW);
>+}
>+
>+static void
>+devlink_reload_stats_update(struct devlink *devlink, enum 
>devlink_reload_limit limit,
>+                          unsigned long actions_performed)
>+{
>+      __devlink_reload_stats_update(devlink, devlink->reload_stats, limit, 
>actions_performed);
>+}
>+
> static int devlink_reload(struct devlink *devlink, struct net *dest_net,
>                         enum devlink_reload_action action, enum 
> devlink_reload_limit limit,
>                         struct netlink_ext_ack *extack, unsigned long 
> *actions_performed)
>@@ -3026,6 +3122,7 @@ static int devlink_reload(struct devlink *devlink, 
>struct net *dest_net,
>               return err;
> 
>       WARN_ON(!test_bit(action, actions_performed));
>+      devlink_reload_stats_update(devlink, limit, *actions_performed);
>       return 0;
> }
> 
>-- 
>2.18.2
>

Reply via email to