Greetings!
I have a SuSE 10.2 64-bit installation that uses a Realtek PCI GbE chip in
D-Link disguise (lspci see below).
While this works rather well after a normal boot sequence, I don't get a
gigabit link after resume from standby or suspend-to-disk.
Entering standby, the link speed goes down to 100 Mb as expected; the link
stays up during standby/suspend (for WOL purposes apparently).
Now after resume, the link is working OK but doesn't come back up to normal
gigabit operation. ifdown, unloading and reloading the r8169 module, and then
ifup again fixes it.
If there's something more I can do to help debug this, please let me know.
Please be sure to copy me, since my list traffic here is still somewhat
unreliable. Thanks.
regards,
Peter
00:0d.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet
Adapter (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at eb00 [size=256]
Region 1: Memory at e812c000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 50020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 11 00 43 17 00 b0 02 10 00 00 02 10 20 00 00
10: 01 eb 00 00 00 c0 12 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 11 00 43
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 f7
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
