On 20-09-17 21:29:41, David Bilsby wrote:
> On 17/09/2020 07:42, Petko Manolov wrote:
> > On 20-09-16 22:32:03, David Bilsby wrote:
> > > Hi
> > >
> > > Would you consider making the PhyLink modifications to the Altera TSE
> > > driver public as this would be very useful for a board we have which uses
> > > an SFP PHY connected to the TSE core via I2C. Currently we are using a
> > > fibre SFP and fixing the speed to 1G but would really like to be able to
> > > use a copper SFP which needs to do negotiation.
> > Well, definitely yes.
> >
> > The driver isn't 100% finished, but it mostly works. One significant
> > downside is the kernel version i had to port it to: 4.19. IIRC there is
> > API
> > change so my current patches can't be applied to 5.x kernels. Also, i
> > could
> > not finish the upstreaming as the customer device i worked on had to be
> > returned.
>
> Interesting about kernel versions as we have just moved to the latest 5.4.44
> lts kernel as suggested on Rocketboard for Arria 10s. We had been having
> issues with 4.19 kernel which seem to have been resolved in the 5.4.44.
Always use mainline (and new) kernels. If possible... ;)
> > However, given access to Altera TSE capable device (which i don't have
> > atm),
> > running a recent kernel, i'll gladly finish the upstreaming.
>
> I would be happy to take what you have at the moment, pre-upstreaming, and
> see
> if I can get it going on the latter kernel, and hopefully provide some
> testing
> feedback. Obviously pass any changes back for you to review and include as
> part of your original work.
There you go.
Petko
>From c59957adebf39153a9a98af278d6036086654150 Mon Sep 17 00:00:00 2001
From: Petko Manolov <petko.mano...@konsulko.com>
Date: Fri, 25 Oct 2019 12:12:33 +0300
Subject: [PATCH 1/2] convert the Altera TSE driver to phylink
Signed-off-by: Petko Manolov <petko.mano...@konsulko.com>
---
drivers/net/ethernet/altera/altera_tse.h | 47 ++
.../net/ethernet/altera/altera_tse_ethtool.c | 20 +-
drivers/net/ethernet/altera/altera_tse_main.c | 547 ++++++++----------
3 files changed, 311 insertions(+), 303 deletions(-)
diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h
index e2feee87180a..781ea1b71289 100644
--- a/drivers/net/ethernet/altera/altera_tse.h
+++ b/drivers/net/ethernet/altera/altera_tse.h
@@ -38,6 +38,7 @@
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
+#include <linux/phylink.h>
#define ALTERA_TSE_SW_RESET_WATCHDOG_CNTR 10000
#define ALTERA_TSE_MAC_FIFO_WIDTH 4 /* TX/RX FIFO width in
@@ -120,13 +121,51 @@
#define MAC_CMDCFG_DISABLE_READ_TIMEOUT_GET(v) GET_BIT_VALUE(v, 27)
#define MAC_CMDCFG_CNT_RESET_GET(v) GET_BIT_VALUE(v, 31)
+#define PCS_CTRL_REG 0x0
+#define PCS_CTRL_RESTART_AN BIT(9)
+#define PCS_CTRL_AN_ENABLE BIT(12)
+#define PCS_CTRL_RESET BIT(15)
+#define PCS_STATUS_REG 0x1
+#define PCS_STATUS_LINK BIT(2)
+#define PCS_STATUS_AN_COMPLETE BIT(5)
+#define PCS_DEV_ABILITY_REG 0x4
+#define PCS_PARTNER_ABILITY_REG 0x5
+#define PCS_ABILITY_1000BASEX_FD BIT(5)
+#define PCS_ABILITY_1000BASEX_HD BIT(6)
+#define PCS_ABILITY_1000BASEX_PAUSE_MASK GENMASK(8, 7)
+#define PCS_ABILITY_1000BASEX_NO_PAUSE (0 << 7)
+#define PCS_ABILITY_1000BASEX_PAUSE_ASYM (1 << 7)
+#define PCS_ABILITY_1000BASEX_PAUSE_SYM (2 << 7)
+#define PCS_ABILITY_1000BASEX_PAUSE_TXRX (3 << 7)
+#define PCS_ABILITY_1000BASEX_RFAULT_MASK GENMASK(13, 12)
+#define PCS_ABILITY_1000BASEX_NO_RFAULT (0 << 12)
+#define PCS_ABILITY_1000BASEX_OFFLINE (1 << 12)
+#define PCS_ABILITY_1000BASEX_FAILURE (2 << 12)
+#define PCS_ABILITY_1000BASEX_AN_ERROR (3 << 12)
+#define PCS_ABILITY_SGMII_COPPER_SPEED_MASK GENMASK(11, 10)
+#define PCS_ABILITY_SGMI_SPEED_10 (0 << 10)
+#define PCS_ABILITY_SGMI_SPEED_100 (1 << 10)
+#define PCS_ABILITY_SGMI_SPEED_1000 (2 << 10)
+#define PCS_ABILITY_SGMII_COPPER_FD BIT(12)
+#define PCS_ABILITY_SGMII_ACK BIT(14)
+#define PCS_ABILITY_SGMII_COPPER_LINK_STATUS BIT(15)
+
/* SGMII PCS register addresses
*/
#define SGMII_PCS_SCRATCH 0x10
#define SGMII_PCS_REV 0x11
#define SGMII_PCS_LINK_TIMER_0 0x12
+#define SGMII_PCS_LINK_TIMER_REG(x) (0x12 + (x))
#define SGMII_PCS_LINK_TIMER_1 0x13
#define SGMII_PCS_IF_MODE 0x14
+#define PCS_IF_MODE_SGMII_ENA BIT(0)
+#define PCS_IF_MODE_USE_SGMII_AN BIT(1)
+#define PCS_IF_MODE_SGMI_SPEED_MASK GENMASK(3, 2)
+#define PCS_IF_MODE_SGMI_SPEED_10 (0 << 2)
+#define PCS_IF_MODE_SGMI_SPEED_100 (1 << 2)
+#define PCS_IF_MODE_SGMI_SPEED_1000 (2 << 2)
+#define PCS_IF_MODE_SGMI_HALF_DUPLEX BIT(4)
+#define PCS_IF_MODE_SGMI_PHY_AN BIT(5)
#define SGMII_PCS_DIS_READ_TO 0x15
#define SGMII_PCS_READ_TO 0x16
#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */
@@ -491,6 +530,14 @@ struct altera_tse_private {
u32 msg_enable;
struct altera_dmaops *dmaops;
+
+ /* phylink stuff */
+ struct phylink *phylink;
+
+ /* PCS address */
+ struct {
+ void __iomem *iomem;
+ } pcs;
};
/* Function prototypes
diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c
index 7c367713c3e6..e1f69f00f4c2 100644
--- a/drivers/net/ethernet/altera/altera_tse_ethtool.c
+++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c
@@ -233,6 +233,22 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs,
buf[i] = csrrd32(priv->mac_dev, i * 4);
}
+static int tse_ethtool_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct altera_tse_private *priv = netdev_priv(dev);
+
+ return phylink_ethtool_ksettings_set(priv->phylink, cmd);
+}
+
+static int tse_ethtool_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct altera_tse_private *priv = netdev_priv(dev);
+
+ return phylink_ethtool_ksettings_get(priv->phylink, cmd);
+}
+
static const struct ethtool_ops tse_ethtool_ops = {
.get_drvinfo = tse_get_drvinfo,
.get_regs_len = tse_reglen,
@@ -243,8 +259,8 @@ static const struct ethtool_ops tse_ethtool_ops = {
.get_ethtool_stats = tse_fill_stats,
.get_msglevel = tse_get_msglevel,
.set_msglevel = tse_set_msglevel,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
+ .get_link_ksettings = tse_ethtool_get_link_ksettings,
+ .set_link_ksettings = tse_ethtool_set_link_ksettings,
};
void altera_tse_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index c3c1195021a2..b19b8c166433 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -97,25 +97,32 @@ static inline u32 tse_tx_avail(struct altera_tse_private *priv)
return priv->tx_cons + priv->tx_ring_size - priv->tx_prod - 1;
}
-/* PCS Register read/write functions
+/* PCS Register sgmii_pcs_read read/write functions
*/
static u16 sgmii_pcs_read(struct altera_tse_private *priv, int regnum)
{
- return csrrd32(priv->mac_dev,
- tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
+ u16 ret;
+
+ ret = ioread32(priv->pcs.iomem + (regnum * sizeof(u16)));
+
+ return ret;
}
static void sgmii_pcs_write(struct altera_tse_private *priv, int regnum,
u16 value)
{
- csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
+ iowrite32(value, priv->pcs.iomem + (regnum * sizeof(u16)));
}
-/* Check PCS scratch memory */
-static int sgmii_pcs_scratch_test(struct altera_tse_private *priv, u16 value)
+static void sgmii_pcs_reset(struct altera_tse_private *priv)
{
- sgmii_pcs_write(priv, SGMII_PCS_SCRATCH, value);
- return (sgmii_pcs_read(priv, SGMII_PCS_SCRATCH) == value);
+ u16 tmp;
+
+ tmp = sgmii_pcs_read(priv, PCS_CTRL_REG);
+ tmp |= PCS_CTRL_RESET;
+ sgmii_pcs_write(priv, PCS_CTRL_REG, tmp);
+ /* wait until the reset bit is clear */
+ while (sgmii_pcs_read(priv, PCS_CTRL_REG) & PCS_CTRL_RESET);
}
/* MDIO specific functions
@@ -126,12 +133,11 @@ static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct altera_tse_private *priv = netdev_priv(ndev);
/* set MDIO address */
- csrwr32((mii_id & 0x1f), priv->mac_dev,
- tse_csroffs(mdio_phy1_addr));
+ csrwr32((mii_id & 0x1f), priv->mac_dev, tse_csroffs(mdio_phy0_addr));
/* get the data */
return csrrd32(priv->mac_dev,
- tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff;
+ tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
}
static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
@@ -141,11 +147,10 @@ static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
struct altera_tse_private *priv = netdev_priv(ndev);
/* set MDIO address */
- csrwr32((mii_id & 0x1f), priv->mac_dev,
- tse_csroffs(mdio_phy1_addr));
-
+ csrwr32((mii_id & 0x1f), priv->mac_dev, tse_csroffs(mdio_phy0_addr));
/* write the data */
- csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4);
+ csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
+
return 0;
}
@@ -626,117 +631,6 @@ static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev)
return ret;
}
-/* Called every time the controller might need to be made
- * aware of new link state. The PHY code conveys this
- * information through variables in the phydev structure, and this
- * function converts those variables into the appropriate
- * register values, and can bring down the device if needed.
- */
-static void altera_tse_adjust_link(struct net_device *dev)
-{
- struct altera_tse_private *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
- int new_state = 0;
-
- /* only change config if there is a link */
- spin_lock(&priv->mac_cfg_lock);
- if (phydev->link) {
- /* Read old config */
- u32 cfg_reg = ioread32(&priv->mac_dev->command_config);
-
- /* Check duplex */
- if (phydev->duplex != priv->oldduplex) {
- new_state = 1;
- if (!(phydev->duplex))
- cfg_reg |= MAC_CMDCFG_HD_ENA;
- else
- cfg_reg &= ~MAC_CMDCFG_HD_ENA;
-
- netdev_dbg(priv->dev, "%s: Link duplex = 0x%x\n",
- dev->name, phydev->duplex);
-
- priv->oldduplex = phydev->duplex;
- }
-
- /* Check speed */
- if (phydev->speed != priv->oldspeed) {
- new_state = 1;
- switch (phydev->speed) {
- case 1000:
- cfg_reg |= MAC_CMDCFG_ETH_SPEED;
- cfg_reg &= ~MAC_CMDCFG_ENA_10;
- break;
- case 100:
- cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
- cfg_reg &= ~MAC_CMDCFG_ENA_10;
- break;
- case 10:
- cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
- cfg_reg |= MAC_CMDCFG_ENA_10;
- break;
- default:
- if (netif_msg_link(priv))
- netdev_warn(dev, "Speed (%d) is not 10/100/1000!\n",
- phydev->speed);
- break;
- }
- priv->oldspeed = phydev->speed;
- }
- iowrite32(cfg_reg, &priv->mac_dev->command_config);
-
- if (!priv->oldlink) {
- new_state = 1;
- priv->oldlink = 1;
- }
- } else if (priv->oldlink) {
- new_state = 1;
- priv->oldlink = 0;
- priv->oldspeed = 0;
- priv->oldduplex = -1;
- }
-
- if (new_state && netif_msg_link(priv))
- phy_print_status(phydev);
-
- spin_unlock(&priv->mac_cfg_lock);
-}
-static struct phy_device *connect_local_phy(struct net_device *dev)
-{
- struct altera_tse_private *priv = netdev_priv(dev);
- struct phy_device *phydev = NULL;
- char phy_id_fmt[MII_BUS_ID_SIZE + 3];
-
- if (priv->phy_addr != POLL_PHY) {
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- priv->mdio->id, priv->phy_addr);
-
- netdev_dbg(dev, "trying to attach to %s\n", phy_id_fmt);
-
- phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
- priv->phy_iface);
- if (IS_ERR(phydev)) {
- netdev_err(dev, "Could not attach to PHY\n");
- phydev = NULL;
- }
-
- } else {
- int ret;
- phydev = phy_find_first(priv->mdio);
- if (phydev == NULL) {
- netdev_err(dev, "No PHY found\n");
- return phydev;
- }
-
- ret = phy_connect_direct(dev, phydev, &altera_tse_adjust_link,
- priv->phy_iface);
- if (ret != 0) {
- netdev_err(dev, "Could not attach to PHY\n");
- phydev = NULL;
- }
- }
- return phydev;
-}
-
static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev)
{
struct altera_tse_private *priv = netdev_priv(dev);
@@ -746,8 +640,10 @@ static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev)
priv->phy_iface = of_get_phy_mode(np);
/* Avoid get phy addr and create mdio if no phy is present */
- if (!priv->phy_iface)
+ if (!priv->phy_iface) {
+ netdev_info(dev, "no PHY specified\n");
return 0;
+ }
/* try to get PHY address from device tree, use PHY autodetection if
* no valid address is given
@@ -766,8 +662,7 @@ static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev)
}
/* Create/attach to MDIO bus */
- ret = altera_tse_mdio_create(dev,
- atomic_add_return(1, &instance_count));
+ ret = altera_tse_mdio_create(dev, atomic_add_return(1, &instance_count));
if (ret)
return -ENODEV;
@@ -775,94 +670,6 @@ static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev)
return 0;
}
-/* Initialize driver's PHY state, and attach to the PHY
- */
-static int init_phy(struct net_device *dev)
-{
- struct altera_tse_private *priv = netdev_priv(dev);
- struct phy_device *phydev;
- struct device_node *phynode;
- bool fixed_link = false;
- int rc = 0;
-
- /* Avoid init phy in case of no phy present */
- if (!priv->phy_iface)
- return 0;
-
- priv->oldlink = 0;
- priv->oldspeed = 0;
- priv->oldduplex = -1;
-
- phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0);
-
- if (!phynode) {
- /* check if a fixed-link is defined in device-tree */
- if (of_phy_is_fixed_link(priv->device->of_node)) {
- rc = of_phy_register_fixed_link(priv->device->of_node);
- if (rc < 0) {
- netdev_err(dev, "cannot register fixed PHY\n");
- return rc;
- }
-
- /* In the case of a fixed PHY, the DT node associated
- * to the PHY is the Ethernet MAC DT node.
- */
- phynode = of_node_get(priv->device->of_node);
- fixed_link = true;
-
- netdev_dbg(dev, "fixed-link detected\n");
- phydev = of_phy_connect(dev, phynode,
- &altera_tse_adjust_link,
- 0, priv->phy_iface);
- } else {
- netdev_dbg(dev, "no phy-handle found\n");
- if (!priv->mdio) {
- netdev_err(dev, "No phy-handle nor local mdio specified\n");
- return -ENODEV;
- }
- phydev = connect_local_phy(dev);
- }
- } else {
- netdev_dbg(dev, "phy-handle found\n");
- phydev = of_phy_connect(dev, phynode,
- &altera_tse_adjust_link, 0, priv->phy_iface);
- }
- of_node_put(phynode);
-
- if (!phydev) {
- netdev_err(dev, "Could not find the PHY\n");
- if (fixed_link)
- of_phy_deregister_fixed_link(priv->device->of_node);
- return -ENODEV;
- }
-
- /* Stop Advertising 1000BASE Capability if interface is not GMII
- * Note: Checkpatch throws CHECKs for the camel case defines below,
- * it's ok to ignore.
- */
- if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) ||
- (priv->phy_iface == PHY_INTERFACE_MODE_RMII))
- phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full);
-
- /* Broken HW is sometimes missing the pull-up resistor on the
- * MDIO line, which results in reads to non-existent devices returning
- * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
- * device as well. If a fixed-link is used the phy_id is always 0.
- * Note: phydev->phy_id is the result of reading the UID PHY registers.
- */
- if ((phydev->phy_id == 0) && !fixed_link) {
- netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id);
- phy_disconnect(phydev);
- return -ENODEV;
- }
-
- netdev_dbg(dev, "attached to PHY %d UID 0x%08x Link = %d\n",
- phydev->mdio.addr, phydev->phy_id, phydev->link);
-
- return 0;
-}
-
static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr)
{
u32 msb;
@@ -1097,66 +904,6 @@ static void tse_set_rx_mode(struct net_device *dev)
spin_unlock(&priv->mac_cfg_lock);
}
-/* Initialise (if necessary) the SGMII PCS component
- */
-static int init_sgmii_pcs(struct net_device *dev)
-{
- struct altera_tse_private *priv = netdev_priv(dev);
- int n;
- unsigned int tmp_reg = 0;
-
- if (priv->phy_iface != PHY_INTERFACE_MODE_SGMII)
- return 0; /* Nothing to do, not in SGMII mode */
-
- /* The TSE SGMII PCS block looks a little like a PHY, it is
- * mapped into the zeroth MDIO space of the MAC and it has
- * ID registers like a PHY would. Sadly this is often
- * configured to zeroes, so don't be surprised if it does
- * show 0x00000000.
- */
-
- if (sgmii_pcs_scratch_test(priv, 0x0000) &&
- sgmii_pcs_scratch_test(priv, 0xffff) &&
- sgmii_pcs_scratch_test(priv, 0xa5a5) &&
- sgmii_pcs_scratch_test(priv, 0x5a5a)) {
- netdev_info(dev, "PCS PHY ID: 0x%04x%04x\n",
- sgmii_pcs_read(priv, MII_PHYSID1),
- sgmii_pcs_read(priv, MII_PHYSID2));
- } else {
- netdev_err(dev, "SGMII PCS Scratch memory test failed.\n");
- return -ENOMEM;
- }
-
- /* Starting on page 5-29 of the MegaCore Function User Guide
- * Set SGMII Link timer to 1.6ms
- */
- sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_0, 0x0D40);
- sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_1, 0x03);
-
- /* Enable SGMII Interface and Enable SGMII Auto Negotiation */
- sgmii_pcs_write(priv, SGMII_PCS_IF_MODE, 0x3);
-
- /* Enable Autonegotiation */
- tmp_reg = sgmii_pcs_read(priv, MII_BMCR);
- tmp_reg |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
- sgmii_pcs_write(priv, MII_BMCR, tmp_reg);
-
- /* Reset PCS block */
- tmp_reg |= BMCR_RESET;
- sgmii_pcs_write(priv, MII_BMCR, tmp_reg);
- for (n = 0; n < SGMII_PCS_SW_RESET_TIMEOUT; n++) {
- if (!(sgmii_pcs_read(priv, MII_BMCR) & BMCR_RESET)) {
- netdev_info(dev, "SGMII PCS block initialised OK\n");
- return 0;
- }
- udelay(1);
- }
-
- /* We failed to reset the block, return a timeout */
- netdev_err(dev, "SGMII PCS block reset failed.\n");
- return -ETIMEDOUT;
-}
-
/* Open and initialize the interface
*/
static int tse_open(struct net_device *dev)
@@ -1181,14 +928,6 @@ static int tse_open(struct net_device *dev)
netdev_warn(dev, "TSE revision %x\n", priv->revision);
spin_lock(&priv->mac_cfg_lock);
- /* no-op if MAC not operating in SGMII mode*/
- ret = init_sgmii_pcs(dev);
- if (ret) {
- netdev_err(dev,
- "Cannot init the SGMII PCS (error: %d)\n", ret);
- spin_unlock(&priv->mac_cfg_lock);
- goto phy_error;
- }
ret = reset_mac(priv);
/* Note that reset_mac will fail if the clocks are gated by the PHY
@@ -1246,8 +985,12 @@ static int tse_open(struct net_device *dev)
spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
- if (dev->phydev)
- phy_start(dev->phydev);
+ ret = phylink_of_phy_connect(priv->phylink, priv->device->of_node, 0);
+ if (ret) {
+ netdev_err(dev, "could not connect phylink (%d)\n", ret);
+ goto tx_request_irq_error;
+ }
+ phylink_start(priv->phylink);
napi_enable(&priv->napi);
netif_start_queue(dev);
@@ -1278,10 +1021,7 @@ static int tse_shutdown(struct net_device *dev)
int ret;
unsigned long int flags;
- /* Stop the PHY */
- if (dev->phydev)
- phy_stop(dev->phydev);
-
+ phylink_stop(priv->phylink);
netif_stop_queue(dev);
napi_disable(&priv->napi);
@@ -1327,6 +1067,209 @@ static struct net_device_ops altera_tse_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
+static void alt_tse_validate(struct net_device *ndev, unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ /* We only support SGMII, 802.3z and RGMII modes */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ !phy_interface_mode_is_8023z(state->interface) &&
+ !phy_interface_mode_is_rgmii(state->interface)) {
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ return;
+ }
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+
+ /* Asymmetric pause is unsupported */
+ phylink_set(mask, Pause);
+ /* Half-duplex at speeds higher than 100Mbit is unsupported */
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+
+ if (!phy_interface_mode_is_8023z(state->interface)) {
+ /* 10M and 100M are only supported in non-802.3z mode */
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+ }
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static int alt_tse_mac_link_state(struct net_device *ndev,
+ struct phylink_link_state *state)
+{
+ struct altera_tse_private *priv = netdev_priv(ndev);
+ u32 pa, stat, if_mode;
+
+ stat = sgmii_pcs_read(priv, PCS_STATUS_REG);
+ if_mode = sgmii_pcs_read(priv, SGMII_PCS_IF_MODE);
+ pa = sgmii_pcs_read(priv, PCS_PARTNER_ABILITY_REG);
+
+ state->an_complete = !!(stat & PCS_STATUS_AN_COMPLETE);
+ state->link = !!(stat & PCS_STATUS_LINK);
+ state->pause = MLO_PAUSE_NONE;
+
+ if (if_mode & PCS_IF_MODE_SGMII_ENA) { // SGMII mode
+ if (pa & PCS_ABILITY_SGMII_COPPER_FD)
+ state->duplex = DUPLEX_FULL;
+ else
+ state->duplex = DUPLEX_HALF;
+ state->link = !!(pa & PCS_ABILITY_SGMII_COPPER_LINK_STATUS);
+
+ switch (pa & PCS_ABILITY_SGMII_COPPER_SPEED_MASK) {
+ case PCS_ABILITY_SGMI_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ case PCS_ABILITY_SGMI_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case PCS_ABILITY_SGMI_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ netdev_warn(ndev, "bad copper mode\n");
+ }
+ } else { // 1000BASE-X mode
+ if (pa & PCS_ABILITY_1000BASEX_FD)
+ state->duplex = DUPLEX_FULL;
+ else
+ state->duplex = DUPLEX_HALF;
+
+ switch (pa & PCS_ABILITY_1000BASEX_PAUSE_MASK) {
+ case PCS_ABILITY_1000BASEX_PAUSE_SYM:
+ state->pause = MLO_PAUSE_SYM;
+ break;
+ case PCS_ABILITY_1000BASEX_PAUSE_ASYM:
+ state->pause = MLO_PAUSE_ASYM | MLO_PAUSE_TX;
+ break;
+ case PCS_ABILITY_1000BASEX_PAUSE_TXRX:
+ state->pause = MLO_PAUSE_TXRX_MASK;
+ break;
+ }
+
+ state->speed = SPEED_1000;
+ }
+
+ return 0;
+}
+
+static void alt_tse_mac_an_restart(struct net_device *ndev)
+{
+ struct altera_tse_private *priv = netdev_priv(ndev);
+ u32 ctrl;
+
+ ctrl = sgmii_pcs_read(priv, PCS_CTRL_REG);
+ ctrl |= (1 << 12) | (1 << 9); // enable AN and restart it
+ sgmii_pcs_write(priv, PCS_CTRL_REG, ctrl);
+
+ sgmii_pcs_reset(priv);
+}
+
+static void alt_tse_pcs_config(struct net_device *ndev,
+ const struct phylink_link_state *state)
+{
+ struct altera_tse_private *priv = netdev_priv(ndev);
+ u32 ctrl, if_mode;
+
+ ctrl = sgmii_pcs_read(priv, PCS_CTRL_REG);
+ if_mode = sgmii_pcs_read(priv, SGMII_PCS_IF_MODE);
+
+ sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_0, 0x0D40);
+ sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_1, 0x03);
+
+ if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ if_mode = PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
+ ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
+ } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX ) {
+ ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
+ if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
+ if_mode |= PCS_IF_MODE_SGMI_SPEED_1000;
+ }
+
+ sgmii_pcs_write(priv, PCS_CTRL_REG, ctrl);
+ sgmii_pcs_write(priv, SGMII_PCS_IF_MODE, if_mode);
+
+ sgmii_pcs_reset(priv);
+}
+
+static void alt_tse_mac_config(struct net_device *ndev, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct altera_tse_private *priv = netdev_priv(ndev);
+ u32 ctrl;
+
+
+ ctrl = csrrd32(priv->mac_dev, tse_csroffs(command_config));
+ ctrl &= ~(MAC_CMDCFG_ENA_10 | MAC_CMDCFG_ETH_SPEED | MAC_CMDCFG_HD_ENA);
+
+ if (state->duplex == DUPLEX_HALF)
+ ctrl |= MAC_CMDCFG_HD_ENA;
+
+ if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ switch (state->speed) {
+ case SPEED_1000:
+ ctrl |= MAC_CMDCFG_ETH_SPEED;
+ break;
+ case SPEED_100:
+ break;
+ case SPEED_10:
+ ctrl |= MAC_CMDCFG_ENA_10;
+ break;
+ case SPEED_UNKNOWN:
+ case 0:
+ break;
+ default:
+ netdev_warn(ndev, "wrong speed");
+ return;
+ }
+ } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX ) {
+ ctrl |= MAC_CMDCFG_ETH_SPEED;
+ } else {
+ netdev_warn(ndev, "wrong mode");
+ return;
+ }
+
+ alt_tse_pcs_config(ndev, state);
+
+ spin_lock(&priv->mac_cfg_lock);
+ csrwr32(ctrl, priv->mac_dev, tse_csroffs(command_config));
+ reset_mac(priv);
+ tse_set_mac(priv, true);
+ spin_unlock(&priv->mac_cfg_lock);
+}
+
+static void alt_tse_mac_link_down(struct net_device *ndev, unsigned int mode,
+ phy_interface_t interface)
+{
+ netdev_info(ndev, "%s\n", __func__);
+}
+
+static void alt_tse_mac_link_up(struct net_device *ndev, unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phy)
+{
+ netdev_info(ndev, "%s\n", __func__);
+}
+
+static const struct phylink_mac_ops alt_tse_phylink_ops = {
+ .validate = alt_tse_validate,
+ .mac_link_state = alt_tse_mac_link_state,
+ .mac_an_restart = alt_tse_mac_an_restart,
+ .mac_config = alt_tse_mac_config,
+ .mac_link_down = alt_tse_mac_link_down,
+ .mac_link_up = alt_tse_mac_link_up,
+};
+
static int request_and_map(struct platform_device *pdev, const char *name,
struct resource **res, void __iomem **ptr)
{
@@ -1364,6 +1307,7 @@ static int altera_tse_probe(struct platform_device *pdev)
int ret = -ENODEV;
struct resource *control_port;
struct resource *dma_res;
+ struct resource *pcs;
struct altera_tse_private *priv;
const unsigned char *macaddr;
void __iomem *descmap;
@@ -1475,6 +1419,11 @@ static int altera_tse_probe(struct platform_device *pdev)
if (ret)
goto err_free_netdev;
+ /* PCS address space */
+ ret = request_and_map(pdev, "pcs", &pcs, &priv->pcs.iomem);
+ if (ret)
+ goto err_free_netdev;
+
/* Rx IRQ */
priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq");
@@ -1600,11 +1549,13 @@ static int altera_tse_probe(struct platform_device *pdev)
(unsigned long) control_port->start, priv->rx_irq,
priv->tx_irq);
- ret = init_phy(ndev);
- if (ret != 0) {
- netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret);
+ priv->phylink = phylink_create(ndev, of_fwnode_handle(priv->device->of_node),
+ priv->phy_iface, &alt_tse_phylink_ops);
+ if (IS_ERR(priv->phylink)) {
+ dev_err(&pdev->dev, "failed to create phylink\n");
goto err_init_phy;
}
+
return 0;
err_init_phy:
@@ -1624,16 +1575,10 @@ static int altera_tse_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct altera_tse_private *priv = netdev_priv(ndev);
- if (ndev->phydev) {
- phy_disconnect(ndev->phydev);
-
- if (of_phy_is_fixed_link(priv->device->of_node))
- of_phy_deregister_fixed_link(priv->device->of_node);
- }
-
platform_set_drvdata(pdev, NULL);
altera_tse_mdio_destroy(ndev);
unregister_netdev(ndev);
+ phylink_destroy(priv->phylink);
free_netdev(ndev);
return 0;
--
2.28.0
>From c7449fac3bbdf2f76c4aa5a24986e84f02a487db Mon Sep 17 00:00:00 2001
From: Petko Manolov <petko.mano...@konsulko.com>
Date: Fri, 25 Oct 2019 12:34:21 +0300
Subject: [PATCH 2/2] add PHYLINK dependency
Signed-off-by: Petko Manolov <petko.mano...@konsulko.com>
---
drivers/net/ethernet/altera/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig
index fdddba51473e..6c75b0de8998 100644
--- a/drivers/net/ethernet/altera/Kconfig
+++ b/drivers/net/ethernet/altera/Kconfig
@@ -2,6 +2,7 @@ config ALTERA_TSE
tristate "Altera Triple-Speed Ethernet MAC support"
depends on HAS_DMA
select PHYLIB
+ select PHYLINK
---help---
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
--
2.28.0
