[PATCH v2 3/4] net: lantiq: Use napi_complete_done()

[Hauke Mehrtens]

Use napi_complete_done() and activate the interrupts when this function
returns true. This way the generic NAPI code can take care of activating
the interrupts.

Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
 drivers/net/ethernet/lantiq_xrx200.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/lantiq_xrx200.c 
b/drivers/net/ethernet/lantiq_xrx200.c
index f34e4dc8c661..abee7d61074c 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -230,8 +230,8 @@ static int xrx200_poll_rx(struct napi_struct *napi, int 
budget)
        }
 
        if (rx < budget) {
-               napi_complete(&ch->napi);
-               ltq_dma_enable_irq(&ch->dma);
+               if (napi_complete_done(&ch->napi, rx))
+                       ltq_dma_enable_irq(&ch->dma);
        }
 
        return rx;
@@ -272,8 +272,8 @@ static int xrx200_tx_housekeeping(struct napi_struct *napi, 
int budget)
                netif_wake_queue(net_dev);
 
        if (pkts < budget) {
-               napi_complete(&ch->napi);
-               ltq_dma_enable_irq(&ch->dma);
+               if (napi_complete_done(&ch->napi, pkts))
+                       ltq_dma_enable_irq(&ch->dma);
        }
 
        return pkts;
-- 
2.20.1