Update the B53 driver to support VLANs while not filtering. This requires us to enable VLAN globally within the switch upon driver initial configuration (dev->vlan_enabled).
We also need to remove the code that dealt with PVID re-configuration in b53_vlan_filtering() since that function worked under the assumption that it would only be called to make a bridge VLAN filtering, or not filtering, and we would attempt to move the port's PVID accordingly. Now that VLANs are programmed all the time, even in the case of a non-VLAN filtering bridge, we would be programming a default_pvid for the bridged switch ports. Signed-off-by: Florian Fainelli <f.faine...@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 6a5796c32721..46ac8875f870 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1377,23 +1377,6 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up); int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) { struct b53_device *dev = ds->priv; - u16 pvid, new_pvid; - - b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); - if (!vlan_filtering) { - /* Filtering is currently enabled, use the default PVID since - * the bridge does not expect tagging anymore - */ - dev->ports[port].pvid = pvid; - new_pvid = b53_default_pvid(dev); - } else { - /* Filtering is currently disabled, restore the previous PVID */ - new_pvid = dev->ports[port].pvid; - } - - if (pvid != new_pvid) - b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), - new_pvid); b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering); @@ -1444,7 +1427,7 @@ void b53_vlan_add(struct dsa_switch *ds, int port, untagged = true; vl->members |= BIT(port); - if (untagged && !dsa_is_cpu_port(ds, port)) + if (untagged) vl->untag |= BIT(port); else vl->untag &= ~BIT(port); @@ -1482,7 +1465,7 @@ int b53_vlan_del(struct dsa_switch *ds, int port, if (pvid == vid) pvid = b53_default_pvid(dev); - if (untagged && !dsa_is_cpu_port(ds, port)) + if (untagged) vl->untag &= ~(BIT(port)); b53_set_vlan_entry(dev, vid, vl); @@ -2619,6 +2602,8 @@ struct b53_device *b53_switch_alloc(struct device *base, dev->priv = priv; dev->ops = ops; ds->ops = &b53_switch_ops; + ds->configure_vlan_while_not_filtering = true; + dev->vlan_enabled = ds->configure_vlan_while_not_filtering; mutex_init(&dev->reg_mutex); mutex_init(&dev->stats_mutex); -- 2.25.1