W dniu 2020-08-29 o 00:53, Andrew Lunn pisze:
On Sat, Aug 29, 2020 at 12:34:05AM +0200, Adam Rudziński wrote:
Hi Andrew.
W dniu 2020-08-29 o 00:28, Andrew Lunn pisze:
Hi Adam
If kernel has to bring up two Ethernet interfaces, the processor has two
peripherals with functionality of MACs (in i.MX6ULL these are Fast Ethernet
Controllers, FECs), but uses a shared MDIO bus, then the kernel first probes
one MAC, enables clock for its PHY, probes MDIO bus tryng to discover _all_
PHYs, and then probes the second MAC, and enables clock for its PHY. The
result is that the second PHY is still inactive during PHY discovery. Thus,
one Ethernet interface is not functional.
What clock are you talking about? Do you have the FEC feeding a 50MHz
clock to the PHY? Each FEC providing its own clock to its own PHY? And
are you saying a PHY without its reference clock does not respond to
MDIO reads and hence the second PHY does not probe because it has no
reference clock?
Andrew
Yes, exactly. In my case the PHYs are LAN8720A, and it works this way.
O.K. Boards i've seen like this have both PHYs driver from the first
MAC. Or the clock goes the other way, the PHY has a crystal and it
feeds the FEC.
I would say the correct way to solve this is to make the FEC a clock
provider. It should register its clocks with the common clock
framework. The MDIO bus can then request the clock from the second FEC
before it scans the bus. Or we add the clock to the PHY node so it
enables the clock before probing it. There are people who want this
sort of framework code, to be able to support a GPIO reset, which
needs releasing before probing the bus for the PHY.
Anyway, post your patch, so we get a better idea what you are
proposing.
Andrew
Hm, this sounds reasonable, but complicated at the same time. I have
spent some time searching for possible solution and never found anything
teaching something similar, so I'd also speculate that it's kind of not
very well documented. That doesn't mean I'm against these solutions,
just that seems to be beyond capabilities of many mortals who even try
to read.
OK, so a patch it is. Please, let me know how to make the patch so that
it was useful and as convenient as possible for you. Would you like me
to use some specific code/repo/branch/... as its base?
Best regards,
Adam
