The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bu...@oss.nxp.com>
---
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 1c4474036d46..fa2baca8c726 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -54,7 +54,8 @@ properties:
phy-connection-type:
description:
- Operation mode of the PHY interface
+ Specifies interface type between the Ethernet device and a physical
+ layer (PHY) device.
enum:
# There is not a standard bus between the MAC and the PHY,
# something proprietary is being used to embed the PHY in the
--
2.1.0
