Convert to %pM instead of using custom code.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 drivers/net/ethernet/qlogic/qed/qed_mcp.c   | 5 ++---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 6 ++----
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c 
b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 988d84564849..5be08f83e0aa 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -2518,11 +2518,10 @@ int qed_mcp_fill_shmem_func_info(struct qed_hwfn 
*p_hwfn,
        }
 
        DP_VERBOSE(p_hwfn, (QED_MSG_SP | NETIF_MSG_IFUP),
-                  "Read configuration from shmem: pause_on_host %02x protocol 
%02x BW [%02x - %02x] MAC %02x:%02x:%02x:%02x:%02x:%02x wwn port %llx node %llx 
ovlan %04x wol %02x\n",
+                  "Read configuration from shmem: pause_on_host %02x protocol 
%02x BW [%02x - %02x] MAC %pM wwn port %llx node %llx ovlan %04x wol %02x\n",
                info->pause_on_host, info->protocol,
                info->bandwidth_min, info->bandwidth_max,
-               info->mac[0], info->mac[1], info->mac[2],
-               info->mac[3], info->mac[4], info->mac[5],
+               info->mac,
                info->wwn_port, info->wwn_node,
                info->ovlan, (u8)p_hwfn->hw_info.b_wol_support);
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c 
b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index aa215eeeb4df..9489089706fe 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -3276,14 +3276,12 @@ static void qed_iov_vf_mbx_ucast_filter(struct qed_hwfn 
*p_hwfn,
 
        DP_VERBOSE(p_hwfn,
                   QED_MSG_IOV,
-                  "VF[%d]: opcode 0x%02x type 0x%02x [%s %s] [vport 0x%02x] 
MAC %02x:%02x:%02x:%02x:%02x:%02x, vlan 0x%04x\n",
+                  "VF[%d]: opcode 0x%02x type 0x%02x [%s %s] [vport 0x%02x] 
MAC %pM, vlan 0x%04x\n",
                   vf->abs_vf_id, params.opcode, params.type,
                   params.is_rx_filter ? "RX" : "",
                   params.is_tx_filter ? "TX" : "",
                   params.vport_to_add_to,
-                  params.mac[0], params.mac[1],
-                  params.mac[2], params.mac[3],
-                  params.mac[4], params.mac[5], params.vlan);
+                  params.mac, params.vlan);
 
        if (!vf->vport_instance) {
                DP_VERBOSE(p_hwfn,
-- 
2.27.0

Reply via email to