The MV88E6190 and MV88E6190X both support per port jumbo configuration
just like the other GE switches. Install the appropriate ops.
Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
---
I'm including this change in my series for completeness. Looking at the
datasheets I think this is an unintentional omission but I don't have actual
hardware to test this change on so some testing from someone with access to the
right chip would be appreciated.
drivers/net/dsa/mv88e6xxx/chip.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index fbfa4087eb7b..c2a4ac99545d 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3933,6 +3933,7 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.port_set_frame_mode = mv88e6351_port_set_frame_mode,
.port_set_egress_floods = mv88e6352_port_set_egress_floods,
.port_set_ether_type = mv88e6351_port_set_ether_type,
+ .port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
.port_pause_limit = mv88e6390_port_pause_limit,
.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
@@ -3991,6 +3992,7 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.port_set_frame_mode = mv88e6351_port_set_frame_mode,
.port_set_egress_floods = mv88e6352_port_set_egress_floods,
.port_set_ether_type = mv88e6351_port_set_ether_type,
+ .port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
.port_pause_limit = mv88e6390_port_pause_limit,
.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
--
2.27.0
