From: Vadim Pasternak <vad...@mellanox.com>
Fix wrong reading of upper pages for SFP EEPROM. According to "Memory
Organization" figure in SFF-8472 spec: When reading upper pages 1, 2 and
3 the offset should be set relative to zero and I2C high address 0x51
[1010001X (A2h)] is to be used.
Fixes: a45bfb5a5070 ("mlxsw: core: Extend QSFP EEPROM size for ethtool")
Signed-off-by: Vadim Pasternak <vad...@mellanox.com>
Reviewed-by: Jiri Pirko <j...@mellanox.com>
Signed-off-by: Ido Schimmel <ido...@mellanox.com>
---
.../net/ethernet/mellanox/mlxsw/core_env.c | 48 ++++++++++++-------
1 file changed, 32 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
index 08215fed193d..a7d86df7123f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
@@ -45,7 +45,7 @@ static int mlxsw_env_validate_cable_ident(struct mlxsw_core
*core, int id,
static int
mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,
u16 offset, u16 size, void *data,
- unsigned int *p_read_size)
+ bool qsfp, unsigned int *p_read_size)
{
char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
char mcia_pl[MLXSW_REG_MCIA_LEN];
@@ -54,6 +54,10 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core,
int module,
int status;
int err;
+ /* MCIA register accepts buffer size <= 48. Page of size 128 should be
+ * read by chunks of size 48, 48, 32. Align the size of the last chunk
+ * to avoid reading after the end of the page.
+ */
size = min_t(u16, size, MLXSW_REG_MCIA_EEPROM_SIZE);
if (offset < MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH &&
@@ -63,18 +67,25 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core
*mlxsw_core, int module,
i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW;
if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) {
- page = MLXSW_REG_MCIA_PAGE_GET(offset);
- offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page;
- /* When reading upper pages 1, 2 and 3 the offset starts at
- * 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436
- * specification for graphical depiction.
- * MCIA register accepts buffer size <= 48. Page of size 128
- * should be read by chunks of size 48, 48, 32. Align the size
- * of the last chunk to avoid reading after the end of the
- * page.
- */
- if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH)
- size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset;
+ if (qsfp) {
+ /* When reading upper pages 1, 2 and 3 the offset
+ * starts at 128. Please refer to "QSFP+ Memory Map"
+ * figure in SFF-8436 specification for graphical
+ * depiction.
+ */
+ page = MLXSW_REG_MCIA_PAGE_GET(offset);
+ offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page;
+ if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH)
+ size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH -
offset;
+ } else {
+ /* When reading upper pages 1, 2 and 3 the offset
+ * starts at 0 and I2C high address is used. Please
refer
+ * refer to "Memory Organization" figure in SFF-8472
+ * specification for graphical depiction.
+ */
+ i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH;
+ offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH;
+ }
}
mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr);
@@ -166,7 +177,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core
*mlxsw_core, int module,
int err;
err = mlxsw_env_query_module_eeprom(mlxsw_core, module, 0, offset,
- module_info, &read_size);
+ module_info, false, &read_size);
if (err)
return err;
@@ -197,7 +208,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core
*mlxsw_core, int module,
/* Verify if transceiver provides diagnostic monitoring page */
err = mlxsw_env_query_module_eeprom(mlxsw_core, module,
SFP_DIAGMON, 1, &diag_mon,
- &read_size);
+ false, &read_size);
if (err)
return err;
@@ -225,17 +236,22 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev,
int offset = ee->offset;
unsigned int read_size;
int i = 0;
+ bool qsfp;
int err;
if (!ee->len)
return -EINVAL;
memset(data, 0, ee->len);
+ /* Validate module identifier value. */
+ err = mlxsw_env_validate_cable_ident(mlxsw_core, module, &qsfp);
+ if (err)
+ return err;
while (i < ee->len) {
err = mlxsw_env_query_module_eeprom(mlxsw_core, module, offset,
ee->len - i, data + i,
- &read_size);
+ qsfp, &read_size);
if (err) {
netdev_err(netdev, "Eeprom query failed\n");
return err;
--
2.26.2
