When the GENET driver resumes from deep sleep the UMAC_CMD
register may not be accessible and therefore should not be
accessed from bcmgenet_wol_power_up_cfg() if the GENET has
been reset.
This commit adds a check of the RBUF_ACPI_EN flag when Wake
on Filter is enabled. A clear flag indicates that the GENET
hardware must have been reset so the remainder of the
hardware programming is bypassed.
Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support")
Signed-off-by: Doug Berger <open...@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index def990dbf34f..1c86eddb1b51 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -229,9 +229,13 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
}
/* Disable WAKE_FILTER Detection */
- reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL);
- reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN);
- bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL);
+ if (priv->wolopts & WAKE_FILTER) {
+ reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL);
+ if (!(reg & RBUF_ACPI_EN))
+ return; /* already reset so skip the rest */
+ reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN);
+ bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL);
+ }
/* Disable CRC Forward */
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
--
2.7.4
