From: Andrew Lunn <and...@lunn.ch>
In addition to the port registers, the device can provide the
SERDES/PCS registers. Dump these, and for a few of the important
SGMII/1000Base-X registers decode the bits.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Chris Healy <cphe...@gmail.com>
---
dsa.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 195 insertions(+), 1 deletion(-)
diff --git a/dsa.c b/dsa.c
index 50a171b..a5045fc 100644
--- a/dsa.c
+++ b/dsa.c
@@ -405,21 +405,204 @@ static void dsa_mv88e6352(int reg, u16 val)
case 19:
REG(reg, "Rx Frame Counter", val);
break;
+ case 20 ... 21:
+ REG(reg, "Reserved", val);
+ break;
case 22:
REG(reg, "LED Control", val);
break;
+ case 23:
+ REG(reg, "Reserved", val);
+ break;
case 24:
REG(reg, "Tag Remap 0-3", val);
break;
case 25:
REG(reg, "Tag Remap 4-7", val);
break;
+ case 26:
+ REG(reg, "Reserved", val);
+ break;
case 27:
REG(reg, "Queue Counters", val);
break;
- default:
+ case 28 ... 31:
REG(reg, "Reserved", val);
break;
+ case 32 + 0:
+ REG(reg - 32, "Fiber Control", val);
+ FIELD("Fiber Reset", "%u", !!(val & 0x8000));
+ FIELD("Loopback", "%u", !!(val & 0x4000));
+ FIELD("Speed", "%s",
+ (val & (0x2000 | 0x0040)) == 0x0000 ? "10 Mbps" :
+ (val & (0x2000 | 0x0040)) == 0x2000 ? "100 Mbps" :
+ (val & (0x2000 | 0x0040)) == 0x0040 ? "1000 Mbps" :
+ (val & (0x2000 | 0x0040)) == (0x2000 | 0x0040) ?
+ "Reserved" : "?");
+ FIELD("Autoneg Enable", "%u", !!(val & 0x1000));
+ FIELD("Power down", "%u", !!(val & 0x0800));
+ FIELD("Isolate", "%u", !!(val & 0x0400));
+ FIELD("Restart Autoneg", "%u", !!(val & 0x0200));
+ FIELD("Duplex", "%s", val & 0x0100 ? "Full" : "Half");
+ break;
+ case 32 + 1:
+ REG(reg - 32, "Fiber Status", val);
+ FIELD("100Base-X FD", "%u", !!(val & 0x4000));
+ FIELD("100Base-X HD", "%u", !!(val & 0x2000));
+ FIELD("Autoneg Complete", "%u", !!(val & 0x0020));
+ FIELD("Remote Fault", "%u", !!(val & 0x0010));
+ FIELD("Autoneg Ability", "%u", !!(val & 0x0008));
+ FIELD("Link Status", "%s", val & 0x0004 ? "Up" : "Down");
+ break;
+ case 32 + 2:
+ REG(reg - 32, "PHY ID 1", val);
+ break;
+ case 32 + 3:
+ REG(reg - 32, "PHY ID 2", val);
+ break;
+ case 32 + 4:
+ REG(reg - 32, "Fiber Autoneg Advertisement", val);
+ FIELD("Remote Fault", "%s",
+ (val & 0x3000) == 0x0000 ? "No error, link OK" :
+ (val & 0x3000) == 0x1000 ? "Link failure" :
+ (val & 0x3000) == 0x2000 ? "Offline" :
+ (val & 0x3000) == 0x3000 ? "Autoneg Error" : "?");
+ FIELD("Pause", "%s",
+ (val & 0x0180) == 0x0000 ? "No Pause" :
+ (val & 0x0180) == 0x0080 ? "Symmetric Pause" :
+ (val & 0x0180) == 0x0100 ? "Asymmetric Pause" :
+ (val & 0x0180) == 0x0180 ? "Symmetric & Asymmetric Pause"
:
+ "?");
+ FIELD("1000BaseX HD", "%u", !!(val & 0x0040));
+ FIELD("1000BaseX FD", "%u", !!(val & 0x0020));
+ break;
+ case 32 + 5:
+ REG(reg - 32, "Fiber Link Autoneg Ability", val);
+ FIELD("Acknowledge", "%u", !!(val & 0x4000));
+ FIELD("Remote Fault", "%s",
+ (val & 0x3000) == 0x0000 ? "No error, link OK" :
+ (val & 0x3000) == 0x1000 ? "Link failure" :
+ (val & 0x3000) == 0x2000 ? "Offline" :
+ (val & 0x3000) == 0x3000 ? "Autoneg Error" : "?");
+ FIELD("Pause", "%s",
+ (val & 0x0180) == 0x0000 ? "No Pause" :
+ (val & 0x0180) == 0x0080 ? "Symmetric Pause" :
+ (val & 0x0180) == 0x0100 ? "Asymmetric Pause" :
+ (val & 0x0180) == 0x0180 ? "Symmetric & Asymmetric Pause"
:
+ "?");
+ FIELD("1000BaseX HD", "%u", !!(val & 0x0040));
+ FIELD("1000BaseX FD", "%u", !!(val & 0x0020));
+ break;
+ case 32 + 6:
+ REG(reg - 32, "Fiber Autoneg Expansion", val);
+ FIELD("Link Partner Next Page Ability", "%u", !!(val & 0x0008));
+ FIELD("Page Received", "%u", !!(val & 0x0002));
+ FIELD("Link Partner Autoneg Ability", "%u", !!(val & 0x0001));
+ break;
+ case 32 + 7:
+ REG(reg - 32, "Fiber Next Page Transmit", val);
+ break;
+ case 32 + 8:
+ REG(reg - 32, "Fiber Link Partner Next Page", val);
+ break;
+ case 32 + 9 ... 32 + 14:
+ REG(reg - 32, "Reserved", val);
+ break;
+ case 32 + 15:
+ REG(reg - 32, "Extended Status", val);
+ break;
+ case 32 + 16:
+ REG(reg - 32, "Fiber Specific Control", val);
+ FIELD("Fiber Transmit FIFO Depth", "%s",
+ (val & 0xc000) == 0x0000 ? "16 Bits" :
+ (val & 0xc000) == 0x4000 ? "24 Bits" :
+ (val & 0xc000) == 0x8000 ? "32 Bits" :
+ (val & 0xc000) == 0xc000 ? "40 Bits" : "?");
+ FIELD("SERDES Loopback", "%u", !!(val & 0x1000));
+ FIELD("Force Link Good", "%u", !!(val & 0x0400));
+ FIELD("MAC Interface Power Down", "%u", !!(val & 0x0008));
+ FIELD("Mode", "%s",
+ (val & 0x0003) == 0x0000 ? "100BaseFX" :
+ (val & 0x0003) == 0x0001 ? "1000BaseX" :
+ (val & 0x0003) == 0x0002 ? "SGMII System" :
+ (val & 0x0003) == 0x0003 ? "SGMII Media" : "?");
+ break;
+ case 32 + 17:
+ REG(reg - 32, "Fiber Specific Status", val);
+ FIELD("Speed", "%s",
+ (val & 0xc000) == 0x0000 ? "10 Mbps" :
+ (val & 0xc000) == 0x4000 ? "100 Mbps" :
+ (val & 0xc000) == 0x8000 ? "1000 Mbps" :
+ (val & 0xc000) == 0xc000 ? "Reserved" : "?");
+ FIELD("Duplex", "%s", val & 0x2000 ? "Full" : "Half");
+ FIELD("Page Received", "%u", !!(val & 0x1000));
+ FIELD("Speed/Duplex Resolved", "%u", !!(val & 0x0800));
+ FIELD("Link", "%s", val & 0x0400 ? "Up" : "Down");
+ FIELD("Sync", "%u", !!(val & 0x0020));
+ FIELD("Energy Detect", "%s", val & 0x010 ? "False" : "True");
+ FIELD("Transmit Pause", "%u", !!(val & 0x0008));
+ FIELD("Receive Pause", "%u", !!(val & 0x00004));
+ break;
+ case 32 + 18:
+ REG(reg - 32, "Fiber Interrupt Enable", val);
+ FIELD("Speed Changed", "%u", !!(val & 0x4000));
+ FIELD("Duplex Changed", "%u", !!(val & 0x2000));
+ FIELD("Page Received", "%u", !!(val & 0x1000));
+ FIELD("Autoneg Complete", "%u", !!(val & 0x0800));
+ FIELD("Link Status Change", "%u", !!(val & 0x0400));
+ FIELD("Symbol Error", "%u", !!(val & 0x0200));
+ FIELD("False Carrier", "%u", !!(val & 0x0100));
+ FIELD("Energy Detect", "%u", !!(val & 0x0010));
+ break;
+ case 32 + 19:
+ REG(reg - 32, "Fiber Interrupt Status", val);
+ FIELD("Speed Changed", "%u", !!(val & 0x4000));
+ FIELD("Duplex Changed", "%u", !!(val & 0x2000));
+ FIELD("Page Received", "%u", !!(val & 0x1000));
+ FIELD("Autoneg Complete", "%u", !!(val & 0x0800));
+ FIELD("Link Status Change", "%u", !!(val & 0x0400));
+ FIELD("Symbol Error", "%u", !!(val & 0x0200));
+ FIELD("False Carrier", "%u", !!(val & 0x0100));
+ FIELD("Energy Detect", "%u", !!(val & 0x0010));
+ break;
+ case 32 + 20:
+ REG(reg - 32, "Reserved", val);
+ break;
+ case 32 + 21:
+ REG(reg - 32, "Fiber Receive Error Counter", val);
+ break;
+ case 32 + 22:
+ REG(reg - 32, "Reserved", val);
+ break;
+ case 32 + 23:
+ REG(reg - 32, "PRBS Control", val);
+ break;
+ case 32 + 24:
+ REG(reg - 32, "PRBS Error Counter LSB", val);
+ break;
+ case 32 + 25:
+ REG(reg - 32, "PRBS Error Counter MSB", val);
+ break;
+ case 32 + 26:
+ REG(reg - 32, "Fiber Specific Control 2", val);
+ FIELD("1000BaseX Noise Filtering", "%u", !!(val & 0x4000));
+ FIELD("1000BaseFX Noise Filtering", "%u", !!(val & 0x2000));
+ FIELD("SERDES Autoneg Bypass Enable", "%u", !!(val & 0x0040));
+ FIELD("SERDES Autoneg Bypass Status", "%u", !!(val & 0x0020));
+ FIELD("Fiber Transmitter Disable", "%u", !!(val & 0x0008));
+ FIELD("SGMII/Fiber Output Amplitude", "%s",
+ (val & 0x0007) == 0x0000 ? "14mV" :
+ (val & 0x0007) == 0x0001 ? "112mV" :
+ (val & 0x0007) == 0x0002 ? "210mV" :
+ (val & 0x0007) == 0x0003 ? "308mV" :
+ (val & 0x0007) == 0x0004 ? "406mV" :
+ (val & 0x0007) == 0x0005 ? "504mV" :
+ (val & 0x0007) == 0x0006 ? "602mV" :
+ (val & 0x0007) == 0x0007 ? "700mV" : "?");
+ break;
+ default:
+ REG(reg - 32, "Reserved", val);
+ break;
}
};
@@ -667,6 +850,17 @@ static int dsa_mv88e6xxx_dump_regs(struct ethtool_regs
*regs)
else
REG(i, "", data[i]);
+ /* Dump the SERDES registers, if provided */
+ if (regs->len > 32 * 2) {
+ printf("\n%s Switch Port SERDES Registers\n", sw->name);
+ printf("-------------------------------------\n");
+ for (i = 32; i < regs->len / 2; i++)
+ if (sw->dump)
+ sw->dump(i, data[i]);
+ else
+ REG(i, "", data[i]);
+ }
+
return 0;
}
--
2.21.3
