If an external PHY uses the CL45 protocol, then phydev->phy_id will be
zero. Update the debug message that prints the PHY ID to check the PHY
mode and print the PMAPMD MMD PHY ID value for a CL45 PHY.
Also, removing the TODO note, as the CL45 support has been updated to
do this.
Signed-off-by: Shyam Sundar S K <shyam-sundar....@amd.com>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 46c3c1ca38d6..5b14fc758c2f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1024,9 +1024,9 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data
*pdata)
return -ENODEV;
}
netif_dbg(pdata, drv, pdata->netdev, "external PHY id is %#010x\n",
- phydev->phy_id);
-
- /*TODO: If c45, add request_module based on one of the MMD ids? */
+ (phy_data->phydev_mode == XGBE_MDIO_MODE_CL45)
+ ? phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD]
+ : phydev->phy_id);
ret = phy_device_register(phydev);
if (ret) {
--
2.25.1
