On Tue, Jun 30, 2020 at 08:09:29PM +0200, Matteo Croce wrote:
> From: Matteo Croce <mcr...@microsoft.com>
>
> Add XDP native support.
> By now only XDP_DROP, XDP_PASS and XDP_REDIRECT
> verdicts are supported.
>
> Co-developed-by: Sven Auhagen <sven.auha...@voleatech.de>
> Signed-off-by: Sven Auhagen <sven.auha...@voleatech.de>
> Signed-off-by: Matteo Croce <mcr...@microsoft.com>
> ---
[...]
> }
>
> +static int
> +mvpp2_run_xdp(struct mvpp2_port *port, struct mvpp2_rx_queue *rxq,
> + struct bpf_prog *prog, struct xdp_buff *xdp,
> + struct page_pool *pp)
> +{
> + unsigned int len, sync, err;
> + struct page *page;
> + u32 ret, act;
> +
> + len = xdp->data_end - xdp->data_hard_start - MVPP2_SKB_HEADROOM;
> + act = bpf_prog_run_xdp(prog, xdp);
> +
> + /* Due xdp_adjust_tail: DMA sync for_device cover max len CPU touch */
> + sync = xdp->data_end - xdp->data_hard_start - MVPP2_SKB_HEADROOM;
> + sync = max(sync, len);
> +
> + switch (act) {
> + case XDP_PASS:
> + ret = MVPP2_XDP_PASS;
> + break;
> + case XDP_REDIRECT:
> + err = xdp_do_redirect(port->dev, xdp, prog);
> + if (unlikely(err)) {
> + ret = MVPP2_XDP_DROPPED;
> + page = virt_to_head_page(xdp->data);
> + page_pool_put_page(pp, page, sync, true);
> + } else {
> + ret = MVPP2_XDP_REDIR;
> + }
> + break;
> + default:
> + bpf_warn_invalid_xdp_action(act);
> + fallthrough;
> + case XDP_ABORTED:
> + trace_xdp_exception(port->dev, prog, act);
> + fallthrough;
> + case XDP_DROP:
> + page = virt_to_head_page(xdp->data);
> + page_pool_put_page(pp, page, sync, true);
> + ret = MVPP2_XDP_DROPPED;
> + break;
> + }
> +
> + return ret;
> +}
> +
> /* Main rx processing */
> static int mvpp2_rx(struct mvpp2_port *port, struct napi_struct *napi,
> int rx_todo, struct mvpp2_rx_queue *rxq)
> {
> struct net_device *dev = port->dev;
> + struct bpf_prog *xdp_prog;
> + struct xdp_buff xdp;
> int rx_received;
> int rx_done = 0;
> + u32 xdp_ret = 0;
> u32 rcvd_pkts = 0;
> u32 rcvd_bytes = 0;
>
> + rcu_read_lock();
> +
> + xdp_prog = READ_ONCE(port->xdp_prog);
> +
> /* Get number of received packets and clamp the to-do */
> rx_received = mvpp2_rxq_received(port, rxq->id);
> if (rx_todo > rx_received)
> @@ -3060,7 +3115,7 @@ static int mvpp2_rx(struct mvpp2_port *port, struct
> napi_struct *napi,
> dma_addr_t dma_addr;
> phys_addr_t phys_addr;
> u32 rx_status;
> - int pool, rx_bytes, err;
> + int pool, rx_bytes, err, ret;
> void *data;
>
> rx_done++;
> @@ -3096,6 +3151,33 @@ static int mvpp2_rx(struct mvpp2_port *port, struct
> napi_struct *napi,
> else
> frag_size = bm_pool->frag_size;
>
> + if (xdp_prog) {
> + xdp.data_hard_start = data;
> + xdp.data = data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM;
> + xdp.data_end = xdp.data + rx_bytes;
> + xdp.frame_sz = PAGE_SIZE;
> +
> + if (bm_pool->pkt_size == MVPP2_BM_SHORT_PKT_SIZE)
> + xdp.rxq = &rxq->xdp_rxq_short;
> + else
> + xdp.rxq = &rxq->xdp_rxq_long;
> +
> + xdp_set_data_meta_invalid(&xdp);
> +
> + ret = mvpp2_run_xdp(port, rxq, xdp_prog, &xdp, pp);
> +
> + if (ret) {
> + xdp_ret |= ret;
> + err = mvpp2_rx_refill(port, bm_pool, pp, pool);
> + if (err) {
> + netdev_err(port->dev, "failed to refill
> BM pools\n");
> + goto err_drop_frame;
> + }
> +
> + continue;
> + }
> + }
> +
> skb = build_skb(data, frag_size);
> if (!skb) {
> netdev_warn(port->dev, "skb build failed\n");
> @@ -3118,7 +3200,7 @@ static int mvpp2_rx(struct mvpp2_port *port, struct
> napi_struct *napi,
> rcvd_pkts++;
> rcvd_bytes += rx_bytes;
>
> - skb_reserve(skb, MVPP2_MH_SIZE + NET_SKB_PAD);
> + skb_reserve(skb, MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM);
> skb_put(skb, rx_bytes);
> skb->protocol = eth_type_trans(skb, dev);
> mvpp2_rx_csum(port, rx_status, skb);
> @@ -3133,6 +3215,8 @@ static int mvpp2_rx(struct mvpp2_port *port, struct
> napi_struct *napi,
> mvpp2_bm_pool_put(port, pool, dma_addr, phys_addr);
> }
>
> + rcu_read_unlock();
> +
> if (rcvd_pkts) {
> struct mvpp2_pcpu_stats *stats = this_cpu_ptr(port->stats);
>
> @@ -3608,6 +3692,8 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
> }
>
> netif_tx_start_all_queues(port->dev);
> +
> + clear_bit(0, &port->state);
> }
>
> /* Set hw internals when stopping port */
> @@ -3615,6 +3701,8 @@ static void mvpp2_stop_dev(struct mvpp2_port *port)
> {
> int i;
>
> + set_bit(0, &port->state);
> +
> /* Disable interrupts on all threads */
> mvpp2_interrupts_disable(port);
>
> @@ -4021,6 +4109,10 @@ static int mvpp2_change_mtu(struct net_device *dev,
> int mtu)
> }
>
> if (MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE) {
> + if (port->xdp_prog) {
> + netdev_err(dev, "Jumbo frames are not supported with
> XDP\n");
Does it make sense to switch to NL_SET_ERR_MSG_MOD() here, so the user can get
an immediate feedback?
> + return -EINVAL;
> + }
> if (priv->percpu_pools) {
> netdev_warn(dev, "mtu %d too high, switching to shared
> buffers", mtu);
> mvpp2_bm_switch_buffers(priv, false);
> @@ -4159,6 +4251,73 @@ static int mvpp2_set_features(struct net_device *dev,
> return 0;
> }
>
> +static int mvpp2_xdp_setup(struct mvpp2_port *port, struct netdev_bpf *bpf)
> +{
> + struct bpf_prog *prog = bpf->prog, *old_prog;
> + bool running = netif_running(port->dev);
> + bool reset = !prog != !port->xdp_prog;
> +
> + if (port->dev->mtu > ETH_DATA_LEN) {
> + netdev_err(port->dev, "Jumbo frames are not supported by XDP,
> current MTU %d.\n",
> + port->dev->mtu);
ditto
> + return -EOPNOTSUPP;
> + }
> +
> + if (!port->priv->percpu_pools) {
> + netdev_err(port->dev, "Per CPU Pools required for XDP");
> + return -EOPNOTSUPP;
> + }
> +
> + /* device is up and bpf is added/removed, must setup the RX queues */
> + if (running && reset) {
> + mvpp2_stop_dev(port);
> + mvpp2_cleanup_rxqs(port);
> + mvpp2_cleanup_txqs(port);
> + }
> +
> + old_prog = xchg(&port->xdp_prog, prog);
> + if (old_prog)
> + bpf_prog_put(old_prog);
> +
> + /* bpf is just replaced, RXQ and MTU are already setup */
> + if (!reset)
> + return 0;
> +
> + /* device was up, restore the link */
> + if (running) {
> + int ret = mvpp2_setup_rxqs(port);
> +
> + if (ret) {
> + netdev_err(port->dev, "mvpp2_setup_rxqs failed\n");
> + return ret;
> + }
> + ret = mvpp2_setup_txqs(port);
> + if (ret) {
> + netdev_err(port->dev, "mvpp2_setup_txqs failed\n");
> + return ret;
> + }
> +
> + mvpp2_start_dev(port);
> + }
> +
> + return 0;
> +}
> +
> +static int mvpp2_xdp(struct net_device *dev, struct netdev_bpf *xdp)
> +{
> + struct mvpp2_port *port = netdev_priv(dev);
> +
> + switch (xdp->command) {
> + case XDP_SETUP_PROG:
> + return mvpp2_xdp_setup(port, xdp);
> + case XDP_QUERY_PROG:
> + xdp->prog_id = port->xdp_prog ? port->xdp_prog->aux->id : 0;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> /* Ethtool methods */
>
> static int mvpp2_ethtool_nway_reset(struct net_device *dev)
> @@ -4509,6 +4668,7 @@ static const struct net_device_ops mvpp2_netdev_ops = {
> .ndo_vlan_rx_add_vid = mvpp2_vlan_rx_add_vid,
> .ndo_vlan_rx_kill_vid = mvpp2_vlan_rx_kill_vid,
> .ndo_set_features = mvpp2_set_features,
> + .ndo_bpf = mvpp2_xdp,
> };
>
> static const struct ethtool_ops mvpp2_eth_tool_ops = {
> --
> 2.26.2
>
