On 10/03/07 13:38, Andi Kleen wrote:
Simon Arlott <[EMAIL PROTECTED]> writes:
On 09/03/07 20:42, Francois Romieu wrote:
Simon Arlott <[EMAIL PROTECTED]> :
When I unplug the cable the system just stops responding to
anything, at all. No message is printed to the console when the
cable is plugged back in.
rtl8139_interrupt (spin_lock(&tp->lock))
-> rtl8139_weird_interrupt
-> rtl_check_media
-> mii_check_media (printk(KERN_INFO "%s: link down\n", ...))
[netpoll stuff here]
-> rtl8139_poll_controller
-> rtl8139_interrupt
*deadlock*
See below for my random stuff of the day. Feel free to open a PR at
bugzilla.kernel.org if the issue does not go away.
The patch doesn't fix it, nothing changes. I'm not sure how this can
be debugged if printk won't work...
earlyprintk can be called directly (early_printk()) and should
work. It won't log over the network of course.
It also won't log over the serial console either :(
(but that's probably a good thing, it's slow enough to boot with tons
of messages to the display because of netconsole and nfs).
rtl8139_interrupt
-> spin_lock(&tp->lock)
-> rtl8139_weird_interrupt
-> rtl_check_media
-> mii_check_media
-> printk(KERN_INFO "%s: link down\n", ...)
-> wite_msg
-> local_irq_save
-> netpoll_send_udp
-> netpoll_send_skb
-> local_irq_save
-> dev->hard_start_xmit(..., ...)
rtl8139_start_xmit
-> spin_lock_irqsave
*deadlock*
--
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
