The SGMII PCS PHY needs to be updated with the link configuration in
the mac_link_up() call rather than in mac_config(). However,
mtk_sgmii_setup_mode_force() programs the SGMII block during
mac_config() when using 802.3z interface modes with the link
configuration.
Split that functionality from mtk_sgmii_setup_mode_force(), moving it
to a new mtk_sgmii_link_up() function, and call it from mac_link_up().
This does not look correct to me: 802.3z modes operate at a fixed
speed. The contents of mtk_sgmii_link_up() look more appropriate for
SGMII mode, but the original code definitely did not call
mtk_sgmii_setup_mode_force() for SGMII mode but only 802.3z mode.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
René, can you assist with this patch please - I really think there are
problems with the existing code. You call mtk_sgmii_setup_mode_force()
in a block which is conditionalised as:
if (state->interface == PHY_INTERFACE_MODE_SGMII ||
phy_interface_mode_is_8023z(state->interface)) {
...
if (state->interface != PHY_INTERFACE_MODE_SGMII)
err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
state);
Hence, mtk_sgmii_setup_mode_force() is only called for 1000BASE-X and
2500BASE-X, which do not support anything but their native speeds.
Yet, mtk_sgmii_setup_mode_force() tries to program the SGMII for 10M
and 100M.
Note that this patch is more about moving uses of state->{speed,duplex}
into mac_link_up(), rather than fixing this problem, but I don't think
the addition in mtk_mac_link_up(), nor mtk_sgmii_link_up() is of any
use.
Thanks.
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 ++++-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 +-
drivers/net/ethernet/mediatek/mtk_sgmii.c | 37 +++++++++++++++------
3 files changed, 36 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 20db302d31ce..ef9ec3b6a5c8 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -326,7 +326,7 @@ static void mtk_mac_config(struct phylink_config *config,
unsigned int mode,
/* Setup SGMIISYS with the determined property */
if (state->interface != PHY_INTERFACE_MODE_SGMII)
err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
- state);
+ state->interface);
else if (phylink_autoneg_inband(mode))
err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
@@ -423,6 +423,13 @@ static void mtk_mac_link_up(struct phylink_config *config,
phylink_config);
u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+ if (phy_interface_mode_is_8023z(interface)) {
+ /* Decide how GMAC and SGMIISYS be mapped */
+ int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
+ 0 : mac->id;
+ mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex);
+ }
+
mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 |
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC |
MAC_MCR_FORCE_RX_FC);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..6f4b99bb7bfb 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -932,7 +932,8 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node
*np,
u32 ana_rgc3);
int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id);
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
- const struct phylink_link_state *state);
+ phy_interface_t interface);
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex);
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id);
int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c
b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 32d83421226a..372c85c830b5 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -60,7 +60,7 @@ int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id)
}
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
- const struct phylink_link_state *state)
+ phy_interface_t interface)
{
unsigned int val;
@@ -69,7 +69,7 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
regmap_read(ss->regmap[id], ss->ana_rgc3, &val);
val &= ~RG_PHY_SPEED_MASK;
- if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
val |= RG_PHY_SPEED_3_125G;
regmap_write(ss->regmap[id], ss->ana_rgc3, val);
@@ -78,11 +78,33 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
val &= ~SGMII_AN_ENABLE;
regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+ if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_2500BASEX) {
+ /* SGMII force mode setting */
+ regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ val &= ~SGMII_IF_MODE_MASK;
+ val |= SGMII_SPEED_1000;
+ val |= SGMII_DUPLEX_FULL;
+ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+ }
+
+ /* Release PHYA power down state */
+ regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ val &= ~SGMII_PHYA_PWD;
+ regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+
+ return 0;
+}
+
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+{
+ unsigned int val;
+
/* SGMII force mode setting */
regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
val &= ~SGMII_IF_MODE_MASK;
- switch (state->speed) {
+ switch (speed) {
case SPEED_10:
val |= SGMII_SPEED_10;
break;
@@ -95,17 +117,10 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int
id,
break;
}
- if (state->duplex == DUPLEX_FULL)
+ if (duplex == DUPLEX_FULL)
val |= SGMII_DUPLEX_FULL;
regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
-
- /* Release PHYA power down state */
- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- val &= ~SGMII_PHYA_PWD;
- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
-
- return 0;
}
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
--
2.20.1
