From: Jisheng Zhang <jisheng.zh...@synaptics.com> Date: Wed, 24 Jun 2020 11:25:16 +0800
> We face an issue with rtl8211f, a pin is shared between INTB and PMEB, > and the PHY Register Accessible Interrupt is enabled by default, so > the INTB/PMEB pin is always active in polling mode case. > > As Heiner pointed out "I was thinking about calling > phy_disable_interrupts() in phy_init_hw(), to have a defined init > state as we don't know in which state the PHY is if the PHY driver is > loaded. We shouldn't assume that it's the chip power-on defaults, BIOS > or boot loader could have changed this. Or in case of dual-boot > systems the other OS could leave the PHY in whatever state." > > patch1 makes phy_disable_interrupts() non-static so that it could be used > in phy_init_hw() to have a defined init state. > > patch2 calls phy_disable_interrupts() in phy_init_hw() to have a > defined init state. > > Since v2: > - Don't export phy_disable_interrupts() but just make it non-static > > Since v1: > - EXPORT the correct symbol Series applied, thank you.
