This 3 patch series migrates the qca8k switch driver over to PHYLINK, and then adds the SGMII clean-ups (i.e. the missing initialisation) on top of that as a second patch. The final patch is a simple spelling fix in a comment.
As before, tested with a device where the CPU connection is RGMII (i.e. the common current use case) + one where the CPU connection is SGMII. I don't have any devices where the SGMII interface is brought out to something other than the CPU. v5: - Move spelling fix to separate patch - Use ds directly rather than ds->priv v4: - Enable pcs_poll so we keep phylink updated when doing in-band negotiation - Explicitly check for PHY_INTERFACE_MODE_1000BASEX when setting SGMII port mode. - Address Vladimir's review comments v3: - Move phylink changes to separate patch - Address rmk review comments v2: - Switch to phylink - Avoid need for device tree configuration options Jonathan McDowell (3): net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB net: dsa: qca8k: Improve SGMII interface handling net: dsa: qca8k: Minor comment spelling fix drivers/net/dsa/qca8k.c | 341 ++++++++++++++++++++++++++++------------ drivers/net/dsa/qca8k.h | 13 ++ 2 files changed, 256 insertions(+), 98 deletions(-) -- 2.20.1
