Re: RATE not being printed on tc -s class show dev XXXX

[Roberto J. Blandino Cisneros]

My TC rules are as follow:

TC="/usr/sbin/tc"
DEV=$1
ip=$2
MASTER1="50000kbit"
RATE1="1000kbit"
burst="5k"
$TC qdisc add dev $DEV root handle 1: htb default 10
$TC class add dev $DEV parent 1: classid 1:1 htb rate ${MASTER1} ceil 
${MASTER1} burst $burst
$TC class add dev $DEV parent 1:1 classid 1:10 htb rate ${RATE1} ceil 
${RATE1} prio 3 burst $burst
$TC qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
$TC filter add dev $DEV parent 1: protocol all prio 1 u32 match ip dst 
$ip flowid 1:10
$TC filter add dev $DEV parent 1: protocol all prio 1 u32 match ip src 
$ip flowid 1:10


El 18/6/20 a las 19:30, Cong Wang escribió:

You either need to enable /sys/module/sch_htb/parameters/htb_rate_est
or specify a rate estimator when you create your HTB class.
Does it need to be set on the "root handle"?

Thanks.