From: Alice Michael <alice.mich...@intel.com>
Implement ethtool interface for the common module.
Signed-off-by: Alice Michael <alice.mich...@intel.com>
Signed-off-by: Alan Brady <alan.br...@intel.com>
Signed-off-by: Phani Burra <phani.r.bu...@intel.com>
Signed-off-by: Joshua Hay <joshua.a....@intel.com>
Signed-off-by: Madhu Chittim <madhu.chit...@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.li...@intel.com>
Reviewed-by: Donald Skidmore <donald.c.skidm...@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeb...@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudr...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
.../net/ethernet/intel/iecm/iecm_ethtool.c | 1107 ++++++++++++++++-
drivers/net/ethernet/intel/iecm/iecm_lib.c | 100 +-
2 files changed, 1203 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/iecm/iecm_ethtool.c
b/drivers/net/ethernet/intel/iecm/iecm_ethtool.c
index a6532592f2f4..2031d736bac6 100644
--- a/drivers/net/ethernet/intel/iecm/iecm_ethtool.c
+++ b/drivers/net/ethernet/intel/iecm/iecm_ethtool.c
@@ -3,6 +3,1111 @@
#include <linux/net/intel/iecm.h>
+/**
+ * iecm_get_rxnfc - command to get RX flow classification rules
+ * @netdev: network interface device structure
+ * @cmd: ethtool rxnfc command
+ * @rule_locs: pointer to store rule locations
+ *
+ * Returns Success if the command is supported.
+ */
+static int iecm_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
+ u32 *rule_locs)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = vport->num_rxq;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXFH:
+ netdev_info(netdev, "RSS hash info is not available\n");
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * iecm_get_rxfh_key_size - get the RSS hash key size
+ * @netdev: network interface device structure
+ *
+ * Returns the table size.
+ */
+static u32 iecm_get_rxfh_key_size(struct net_device *netdev)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ if (!iecm_is_cap_ena(vport->adapter, VIRTCHNL_CAP_RSS)) {
+ dev_info(&vport->adapter->pdev->dev, "RSS is not supported on
this device\n");
+ return 0;
+ }
+
+ return vport->adapter->rss_data.rss_key_size;
+}
+
+/**
+ * iecm_get_rxfh_indir_size - get the Rx flow hash indirection table size
+ * @netdev: network interface device structure
+ *
+ * Returns the table size.
+ */
+static u32 iecm_get_rxfh_indir_size(struct net_device *netdev)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ if (!iecm_is_cap_ena(vport->adapter, VIRTCHNL_CAP_RSS)) {
+ dev_info(&vport->adapter->pdev->dev, "RSS is not supported on
this device\n");
+ return 0;
+ }
+
+ return vport->adapter->rss_data.rss_lut_size;
+}
+
+/**
+ * iecm_find_virtual_qid - Finds the virtual RX qid from the absolute RX qid
+ * @vport: virtual port structure
+ * @qid_list: List of the RX qid's
+ *
+ * Returns the virtual RX QID.
+ */
+static u32 iecm_find_virtual_qid(struct iecm_vport *vport, u16 *qid_list,
+ u32 abs_rx_qid)
+{
+ u32 i;
+
+ for (i = 0; i < vport->num_rxq; i++)
+ if ((u32)qid_list[i] == abs_rx_qid)
+ break;
+ return i;
+}
+
+/**
+ * iecm_get_rxfh - get the Rx flow hash indirection table
+ * @netdev: network interface device structure
+ * @indir: indirection table
+ * @key: hash key
+ * @hfunc: hash function in use
+ *
+ * Reads the indirection table directly from the hardware. Always returns 0.
+ */
+static int iecm_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
+ u8 *hfunc)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ struct iecm_adapter *adapter;
+ u16 i, *qid_list;
+ u32 abs_qid;
+
+ adapter = vport->adapter;
+
+ if (!iecm_is_cap_ena(adapter, VIRTCHNL_CAP_RSS)) {
+ dev_info(&vport->adapter->pdev->dev, "RSS is not supported on
this device\n");
+ return 0;
+ }
+
+ if (adapter->state != __IECM_UP)
+ return 0;
+
+ if (hfunc)
+ *hfunc = ETH_RSS_HASH_TOP;
+
+ if (key)
+ memcpy(key, adapter->rss_data.rss_key,
+ adapter->rss_data.rss_key_size);
+
+ qid_list = kcalloc(vport->num_rxq, sizeof(u16), GFP_KERNEL);
+ if (!qid_list)
+ return -ENOMEM;
+
+ iecm_get_rx_qid_list(vport, qid_list);
+
+ if (indir)
+ /* Each 32 bits pointed by 'indir' is stored with a lut entry */
+ for (i = 0; i < adapter->rss_data.rss_lut_size; i++) {
+ abs_qid = (u32)adapter->rss_data.rss_lut[i];
+ indir[i] = iecm_find_virtual_qid(vport, qid_list,
+ abs_qid);
+ }
+
+ kfree(qid_list);
+
+ return 0;
+}
+
+/**
+ * iecm_set_rxfh - set the Rx flow hash indirection table
+ * @netdev: network interface device structure
+ * @indir: indirection table
+ * @key: hash key
+ * @hfunc: hash function to use
+ *
+ * Returns -EINVAL if the table specifies an invalid queue id, otherwise
+ * returns 0 after programming the table.
+ */
+static int iecm_set_rxfh(struct net_device *netdev, const u32 *indir,
+ const u8 *key, const u8 hfunc)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ struct iecm_adapter *adapter;
+ u16 *qid_list;
+ u16 lut;
+
+ adapter = vport->adapter;
+
+ if (!iecm_is_cap_ena(adapter, VIRTCHNL_CAP_RSS)) {
+ dev_info(&adapter->pdev->dev, "RSS is not supported on this
device.\n");
+ return 0;
+ }
+ if (adapter->state != __IECM_UP)
+ return 0;
+
+ if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)
+ return -EOPNOTSUPP;
+
+ if (key)
+ memcpy(adapter->rss_data.rss_key, key,
+ adapter->rss_data.rss_key_size);
+
+ qid_list = kcalloc(vport->num_rxq, sizeof(u16), GFP_KERNEL);
+ if (!qid_list)
+ return -ENOMEM;
+
+ iecm_get_rx_qid_list(vport, qid_list);
+
+ if (indir) {
+ for (lut = 0; lut < adapter->rss_data.rss_lut_size; lut++) {
+ int index = indir[lut];
+
+ if (index >= vport->num_rxq) {
+ kfree(qid_list);
+ return -EINVAL;
+ }
+ adapter->rss_data.rss_lut[lut] = qid_list[index];
+ }
+ } else {
+ iecm_fill_dflt_rss_lut(vport, qid_list);
+ }
+
+ kfree(qid_list);
+
+ return iecm_config_rss(vport);
+}
+
+/**
+ * iecm_get_channels: get the number of channels supported by the device
+ * @netdev: network interface device structure
+ * @ch: channel information structure
+ *
+ * Report maximum of TX and RX. Report one extra channel to match our mailbox
+ * Queue.
+ */
+static void iecm_get_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ /* Report maximum channels */
+ ch->max_combined = IECM_MAX_Q;
+
+ ch->max_other = IECM_MAX_NONQ;
+ ch->other_count = IECM_MAX_NONQ;
+
+ ch->combined_count = max(vport->num_txq, vport->num_rxq);
+}
+
+/**
+ * iecm_set_channels: set the new channel count
+ * @netdev: network interface device structure
+ * @ch: channel information structure
+ *
+ * Negotiate a new number of channels with CP. Returns 0 on success, negative
+ * on failure.
+ */
+static int iecm_set_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ int num_req_q = ch->combined_count;
+
+ if (num_req_q == max(vport->num_txq, vport->num_rxq))
+ return 0;
+
+ /* All of these should have already been checked by ethtool before this
+ * even gets to us, but just to be sure.
+ */
+ if (num_req_q <= 0 || num_req_q > IECM_MAX_Q)
+ return -EINVAL;
+
+ if (ch->rx_count || ch->tx_count || ch->other_count != IECM_MAX_NONQ)
+ return -EINVAL;
+
+ vport->adapter->config_data.num_req_qs = num_req_q;
+
+ return iecm_initiate_soft_reset(vport, __IECM_SR_Q_CHANGE);
+}
+
+/**
+ * iecm_get_ringparam - Get ring parameters
+ * @netdev: network interface device structure
+ * @ring: ethtool ringparam structure
+ *
+ * Returns current ring parameters. TX and RX rings are reported separately,
+ * but the number of rings is not reported.
+ */
+static void iecm_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ ring->rx_max_pending = IECM_MAX_RXQ_DESC;
+ ring->tx_max_pending = IECM_MAX_TXQ_DESC;
+ ring->rx_pending = vport->rxq_desc_count;
+ ring->tx_pending = vport->txq_desc_count;
+}
+
+/**
+ * iecm_set_ringparam - Set ring parameters
+ * @netdev: network interface device structure
+ * @ring: ethtool ringparam structure
+ *
+ * Sets ring parameters. TX and RX rings are controlled separately, but the
+ * number of rings is not specified, so all rings get the same settings.
+ */
+static int iecm_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ u32 new_rx_count, new_tx_count;
+
+ if (ring->rx_mini_pending || ring->rx_jumbo_pending)
+ return -EINVAL;
+
+ new_tx_count = clamp_t(u32, ring->tx_pending,
+ IECM_MIN_TXQ_DESC,
+ IECM_MAX_TXQ_DESC);
+ new_tx_count = ALIGN(new_tx_count, IECM_REQ_DESC_MULTIPLE);
+
+ new_rx_count = clamp_t(u32, ring->rx_pending,
+ IECM_MIN_RXQ_DESC,
+ IECM_MAX_RXQ_DESC);
+ new_rx_count = ALIGN(new_rx_count, IECM_REQ_DESC_MULTIPLE);
+
+ /* if nothing to do return success */
+ if (new_tx_count == vport->txq_desc_count &&
+ new_rx_count == vport->rxq_desc_count)
+ return 0;
+
+ vport->adapter->config_data.num_req_txq_desc = new_tx_count;
+ vport->adapter->config_data.num_req_rxq_desc = new_rx_count;
+
+ return iecm_initiate_soft_reset(vport, __IECM_SR_Q_DESC_CHANGE);
+}
+
+/**
+ * struct iecm_stats - definition for an ethtool statistic
+ * @stat_string: statistic name to display in ethtool -S output
+ * @sizeof_stat: the sizeof() the stat, must be no greater than sizeof(u64)
+ * @stat_offset: offsetof() the stat from a base pointer
+ *
+ * This structure defines a statistic to be added to the ethtool stats buffer.
+ * It defines a statistic as offset from a common base pointer. Stats should
+ * be defined in constant arrays using the IECM_STAT macro, with every element
+ * of the array using the same _type for calculating the sizeof_stat and
+ * stat_offset.
+ *
+ * The @sizeof_stat is expected to be sizeof(u8), sizeof(u16), sizeof(u32) or
+ * sizeof(u64). Other sizes are not expected and will produce a WARN_ONCE from
+ * the iecm_add_ethtool_stat() helper function.
+ *
+ * The @stat_string is interpreted as a format string, allowing formatted
+ * values to be inserted while looping over multiple structures for a given
+ * statistics array. Thus, every statistic string in an array should have the
+ * same type and number of format specifiers, to be formatted by variadic
+ * arguments to the iecm_add_stat_string() helper function.
+ */
+struct iecm_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+/* Helper macro to define an iecm_stat structure with proper size and type.
+ * Use this when defining constant statistics arrays. Note that @_type expects
+ * only a type name and is used multiple times.
+ */
+#define IECM_STAT(_type, _name, _stat) { \
+ .stat_string = _name, \
+ .sizeof_stat = sizeof_field(_type, _stat), \
+ .stat_offset = offsetof(_type, _stat) \
+}
+
+/* Helper macro for defining some statistics related to queues */
+#define IECM_QUEUE_STAT(_name, _stat) \
+ IECM_STAT(struct iecm_queue, _name, _stat)
+
+/* Stats associated with a Tx queue */
+static const struct iecm_stats iecm_gstrings_tx_queue_stats[] = {
+ IECM_QUEUE_STAT("%s-%u.packets", q_stats.tx.packets),
+ IECM_QUEUE_STAT("%s-%u.bytes", q_stats.tx.bytes),
+};
+
+/* Stats associated with an Rx queue */
+static const struct iecm_stats iecm_gstrings_rx_queue_stats[] = {
+ IECM_QUEUE_STAT("%s-%u.packets", q_stats.rx.packets),
+ IECM_QUEUE_STAT("%s-%u.bytes", q_stats.rx.bytes),
+ IECM_QUEUE_STAT("%s-%u.generic_csum", q_stats.rx.generic_csum),
+ IECM_QUEUE_STAT("%s-%u.basic_csum", q_stats.rx.basic_csum),
+ IECM_QUEUE_STAT("%s-%u.csum_err", q_stats.rx.csum_err),
+ IECM_QUEUE_STAT("%s-%u.hsplit_buf_overflow", q_stats.rx.hsplit_hbo),
+};
+
+#define IECM_TX_QUEUE_STATS_LEN
ARRAY_SIZE(iecm_gstrings_tx_queue_stats)
+#define IECM_RX_QUEUE_STATS_LEN
ARRAY_SIZE(iecm_gstrings_rx_queue_stats)
+
+/* For now we have one and only one private flag and it is only defined
+ * when we have support for the SKIP_CPU_SYNC DMA attribute. Instead
+ * of leaving all this code sitting around empty we will strip it unless
+ * our one private flag is actually available.
+ */
+struct iecm_priv_flags {
+ char flag_string[ETH_GSTRING_LEN];
+ bool read_only;
+ u32 flag;
+};
+
+#define IECM_PRIV_FLAG(_name, _flag, _read_only) { \
+ .read_only = _read_only, \
+ .flag_string = _name, \
+ .flag = _flag, \
+}
+
+static const struct iecm_priv_flags iecm_gstrings_priv_flags[] = {
+ IECM_PRIV_FLAG("", 0, 0),
+};
+
+#define IECM_PRIV_FLAGS_STR_LEN ARRAY_SIZE(iecm_gstrings_priv_flags)
+
+/**
+ * __iecm_add_stat_strings - copy stat strings into ethtool buffer
+ * @p: ethtool supplied buffer
+ * @stats: stat definitions array
+ * @size: size of the stats array
+ *
+ * Format and copy the strings described by stats into the buffer pointed at
+ * by p.
+ */
+static void __iecm_add_stat_strings(u8 **p, const struct iecm_stats stats[],
+ const unsigned int size, ...)
+{
+ unsigned int i;
+
+ for (i = 0; i < size; i++) {
+ va_list args;
+
+ va_start(args, size);
+ vsnprintf((char *)*p, ETH_GSTRING_LEN,
+ stats[i].stat_string, args);
+ *p += ETH_GSTRING_LEN;
+ va_end(args);
+ }
+}
+
+/**
+ * iecm_add_stat_strings - copy stat strings into ethtool buffer
+ * @p: ethtool supplied buffer
+ * @stats: stat definitions array
+ *
+ * Format and copy the strings described by the const static stats value into
+ * the buffer pointed at by p.
+ *
+ * The parameter @stats is evaluated twice, so parameters with side effects
+ * should be avoided. Additionally, stats must be an array such that
+ * ARRAY_SIZE can be called on it.
+ */
+#define iecm_add_stat_strings(p, stats, ...) \
+ __iecm_add_stat_strings(p, stats, ARRAY_SIZE(stats), ## __VA_ARGS__)
+
+/**
+ * iecm_get_stat_strings - Get stat strings
+ * @netdev: network interface device structure
+ * @data: buffer for string data
+ *
+ * Builds the statistics string table
+ */
+static void iecm_get_stat_strings(struct net_device *netdev, u8 *data)
+{
+ unsigned int i;
+
+ /* It's critical that we always report a constant number of strings and
+ * that the strings are reported in the same order regardless of how
+ * many queues are actually in use.
+ */
+ for (i = 0; i < IECM_MAX_Q; i++)
+ iecm_add_stat_strings(&data, iecm_gstrings_tx_queue_stats,
+ "tx", i);
+ for (i = 0; i < IECM_MAX_Q; i++)
+ iecm_add_stat_strings(&data, iecm_gstrings_rx_queue_stats,
+ "rx", i);
+}
+
+/**
+ * iecm_get_priv_flag_strings - Get private flag strings
+ * @netdev: network interface device structure
+ * @data: buffer for string data
+ *
+ * Builds the private flags string table
+ */
+static void iecm_get_priv_flag_strings(struct net_device *netdev, u8 *data)
+{
+ unsigned int i;
+
+ for (i = 0; i < IECM_PRIV_FLAGS_STR_LEN; i++) {
+ snprintf((char *)data, ETH_GSTRING_LEN, "%s",
+ iecm_gstrings_priv_flags[i].flag_string);
+ data += ETH_GSTRING_LEN;
+ }
+}
+
+/**
+ * iecm_get_strings - Get string set
+ * @netdev: network interface device structure
+ * @sset: id of string set
+ * @data: buffer for string data
+ *
+ * Builds string tables for various string sets
+ */
+static void iecm_get_strings(struct net_device *netdev, u32 sset, u8 *data)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ iecm_get_stat_strings(netdev, data);
+ break;
+ case ETH_SS_PRIV_FLAGS:
+ iecm_get_priv_flag_strings(netdev, data);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * iecm_get_sset_count - Get length of string set
+ * @netdev: network interface device structure
+ * @sset: id of string set
+ *
+ * Reports size of various string tables.
+ */
+static int iecm_get_sset_count(struct net_device *netdev, int sset)
+{
+ if (sset == ETH_SS_STATS)
+ /* This size reported back here *must* be constant throughout
+ * the lifecycle of the netdevice, i.e. we must report the
+ * maximum length even for queues that don't technically exist.
+ * This is due to the fact that this userspace API uses three
+ * separate ioctl calls to get stats data but has no way to
+ * communicate back to userspace when that size has changed,
+ * which can typically happen as a result of changing number of
+ * queues. If the number/order of stats change in the middle of
+ * this call chain it will lead to userspace crashing/accessing
+ * bad data through buffer under/overflow.
+ */
+ return (IECM_TX_QUEUE_STATS_LEN * IECM_MAX_Q) +
+ (IECM_RX_QUEUE_STATS_LEN * IECM_MAX_Q);
+ else if (sset == ETH_SS_PRIV_FLAGS)
+ return IECM_PRIV_FLAGS_STR_LEN;
+ else
+ return -EINVAL;
+}
+
+/**
+ * iecm_add_one_ethtool_stat - copy the stat into the supplied buffer
+ * @data: location to store the stat value
+ * @pstat: old stat pointer to copy from
+ * @stat: the stat definition
+ *
+ * Copies the stat data defined by the pointer and stat structure pair into
+ * the memory supplied as data. Used to implement iecm_add_ethtool_stats and
+ * iecm_add_queue_stats. If the pointer is null, data will be zero'd.
+ */
+static void
+iecm_add_one_ethtool_stat(u64 *data, void *pstat,
+ const struct iecm_stats *stat)
+{
+ char *p;
+
+ if (!pstat) {
+ /* ensure that the ethtool data buffer is zero'd for any stats
+ * which don't have a valid pointer.
+ */
+ *data = 0;
+ return;
+ }
+
+ p = (char *)pstat + stat->stat_offset;
+ switch (stat->sizeof_stat) {
+ case sizeof(u64):
+ *data = *((u64 *)p);
+ break;
+ case sizeof(u32):
+ *data = *((u32 *)p);
+ break;
+ case sizeof(u16):
+ *data = *((u16 *)p);
+ break;
+ case sizeof(u8):
+ *data = *((u8 *)p);
+ break;
+ default:
+ WARN_ONCE(1, "unexpected stat size for %s",
+ stat->stat_string);
+ *data = 0;
+ }
+}
+
+/**
+ * iecm_add_queue_stats - copy queue statistics into supplied buffer
+ * @data: ethtool stats buffer
+ * @q: the queue to copy
+ *
+ * Queue statistics must be copied while protected by
+ * u64_stats_fetch_begin_irq, so we can't directly use iecm_add_ethtool_stats.
+ * Assumes that queue stats are defined in iecm_gstrings_queue_stats. If the
+ * queue pointer is null, zero out the queue stat values and update the data
+ * pointer. Otherwise safely copy the stats from the queue into the supplied
+ * buffer and update the data pointer when finished.
+ *
+ * This function expects to be called while under rcu_read_lock().
+ */
+static void
+iecm_add_queue_stats(u64 **data, struct iecm_queue *q)
+{
+ const struct iecm_stats *stats;
+ unsigned int start;
+ unsigned int size;
+ unsigned int i;
+
+ if (q->q_type == VIRTCHNL_QUEUE_TYPE_RX) {
+ size = IECM_RX_QUEUE_STATS_LEN;
+ stats = iecm_gstrings_rx_queue_stats;
+ } else {
+ size = IECM_TX_QUEUE_STATS_LEN;
+ stats = iecm_gstrings_tx_queue_stats;
+ }
+
+ /* To avoid invalid statistics values, ensure that we keep retrying
+ * the copy until we get a consistent value according to
+ * u64_stats_fetch_retry_irq. But first, make sure our queue is
+ * non-null before attempting to access its syncp.
+ */
+ do {
+ start = u64_stats_fetch_begin_irq(&q->stats_sync);
+ for (i = 0; i < size; i++)
+ iecm_add_one_ethtool_stat(&(*data)[i], q, &stats[i]);
+ } while (u64_stats_fetch_retry_irq(&q->stats_sync, start));
+
+ /* Once we successfully copy the stats in, update the data pointer */
+ *data += size;
+}
+
+/**
+ * iecm_add_empty_queue_stats - Add stats for a non-existent queue
+ * @data: pointer to data buffer
+ * @qtype: type of data queue
+ *
+ * We must report a constant length of stats back to userspace regardless of
+ * how many queues are actually in use because stats collection happens over
+ * three separate ioctls and there's no way to notify userspace the size
+ * changed between those calls. This adds empty to data to the stats since we
+ * don't have a real queue to refer to for this stats slot.
+ */
+static void
+iecm_add_empty_queue_stats(u64 **data, enum virtchnl_queue_type qtype)
+{
+ unsigned int i;
+ int stats_len;
+
+ if (qtype == VIRTCHNL_QUEUE_TYPE_RX)
+ stats_len = IECM_RX_QUEUE_STATS_LEN;
+ else
+ stats_len = IECM_TX_QUEUE_STATS_LEN;
+
+ for (i = 0; i < stats_len; i++)
+ (*data)[i] = 0;
+ *data += stats_len;
+}
+
+/**
+ * iecm_get_ethtool_stats - report device statistics
+ * @netdev: network interface device structure
+ * @stats: ethtool statistics structure
+ * @data: pointer to data buffer
+ *
+ * All statistics are added to the data buffer as an array of u64.
+ */
+static void iecm_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ enum virtchnl_queue_type qtype;
+ unsigned int total = 0;
+ unsigned int i, j;
+
+ if (vport->adapter->state != __IECM_UP)
+ return;
+
+ rcu_read_lock();
+ for (i = 0; i < vport->num_txq_grp; i++) {
+ struct iecm_txq_group *txq_grp = &vport->txq_grps[i];
+
+ qtype = VIRTCHNL_QUEUE_TYPE_TX;
+
+ for (j = 0; j < txq_grp->num_txq; j++, total++) {
+ struct iecm_queue *txq = &txq_grp->txqs[j];
+
+ if (!txq)
+ iecm_add_empty_queue_stats(&data, qtype);
+ else
+ iecm_add_queue_stats(&data, txq);
+ }
+ }
+ /* It is critical we provide a constant number of stats back to
+ * userspace regardless of how many queues are actually in use because
+ * there is no way to inform userspace the size has changed between
+ * ioctl calls. This will fill in any missing stats with zero.
+ */
+ for (; total < IECM_MAX_Q; total++)
+ iecm_add_empty_queue_stats(&data, VIRTCHNL_QUEUE_TYPE_TX);
+ total = 0;
+
+ for (i = 0; i < vport->num_rxq_grp; i++) {
+ struct iecm_rxq_group *rxq_grp = &vport->rxq_grps[i];
+ int num_rxq;
+
+ qtype = VIRTCHNL_QUEUE_TYPE_RX;
+
+ if (iecm_is_queue_model_split(vport->rxq_model))
+ num_rxq = rxq_grp->splitq.num_rxq_sets;
+ else
+ num_rxq = rxq_grp->singleq.num_rxq;
+
+ for (j = 0; j < num_rxq; j++, total++) {
+ struct iecm_queue *rxq;
+
+ if (iecm_is_queue_model_split(vport->rxq_model))
+ rxq = &rxq_grp->splitq.rxq_sets[j].rxq;
+ else
+ rxq = &rxq_grp->singleq.rxqs[j];
+ if (!rxq)
+ iecm_add_empty_queue_stats(&data, qtype);
+ else
+ iecm_add_queue_stats(&data, rxq);
+ }
+ }
+ for (; total < IECM_MAX_Q; total++)
+ iecm_add_empty_queue_stats(&data, VIRTCHNL_QUEUE_TYPE_RX);
+ rcu_read_unlock();
+}
+
+/**
+ * iecm_find_rxq - find rxq from q index
+ * @vport: virtual port associated to queue
+ * @q_num: q index used to find queue
+ *
+ * returns pointer to Rx queue
+ */
+static struct iecm_queue *
+iecm_find_rxq(struct iecm_vport *vport, int q_num)
+{
+ struct iecm_queue *rxq;
+ int q_grp, q_idx;
+
+ if (iecm_is_queue_model_split(vport->rxq_model)) {
+ q_grp = q_num / IECM_DFLT_SPLITQ_RXQ_PER_GROUP;
+ q_idx = q_num % IECM_DFLT_SPLITQ_RXQ_PER_GROUP;
+
+ rxq = &vport->rxq_grps[q_grp].splitq.rxq_sets[q_idx].rxq;
+ } else {
+ q_grp = q_num / IECM_DFLT_SINGLEQ_RXQ_PER_GROUP;
+ q_idx = q_num % IECM_DFLT_SINGLEQ_RXQ_PER_GROUP;
+
+ rxq = &vport->rxq_grps[q_grp].singleq.rxqs[q_idx];
+ }
+
+ return rxq;
+}
+
+/**
+ * iecm_find_txq - find txq from q index
+ * @vport: virtual port associated to queue
+ * @q_num: q index used to find queue
+ *
+ * returns pointer to Tx queue
+ */
+static struct iecm_queue *
+iecm_find_txq(struct iecm_vport *vport, int q_num)
+{
+ struct iecm_queue *txq;
+
+ if (iecm_is_queue_model_split(vport->txq_model)) {
+ int q_grp = q_num / IECM_DFLT_SPLITQ_TXQ_PER_GROUP;
+
+ txq = vport->txq_grps[q_grp].complq;
+ } else {
+ txq = vport->txqs[q_num];
+ }
+
+ return txq;
+}
+
+/**
+ * __iecm_get_q_coalesce - get ITR values for specific queue
+ * @ec: ethtool structure to fill with driver's coalesce settings
+ * @q: queue of Rx or Tx
+ */
+static void
+__iecm_get_q_coalesce(struct ethtool_coalesce *ec, struct iecm_queue *q)
+{
+ u16 itr_setting;
+ bool dyn_ena;
+
+ itr_setting = IECM_ITR_SETTING(q->itr.target_itr);
+ dyn_ena = IECM_ITR_IS_DYNAMIC(q->itr.target_itr);
+ if (q->q_type == VIRTCHNL_QUEUE_TYPE_RX) {
+ ec->use_adaptive_rx_coalesce = dyn_ena;
+ ec->rx_coalesce_usecs = itr_setting;
+ } else {
+ ec->use_adaptive_tx_coalesce = dyn_ena;
+ ec->tx_coalesce_usecs = itr_setting;
+ }
+}
+
+/**
+ * iecm_get_q_coalesce - get ITR values for specific queue
+ * @netdev: pointer to the netdev associated with this query
+ * @ec: coalesce settings to program the device with
+ * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
+ *
+ * Return 0 on success, and negative on failure
+ */
+static int
+iecm_get_q_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec,
+ u32 q_num)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ if (vport->adapter->state != __IECM_UP)
+ return 0;
+
+ if (q_num >= vport->num_rxq && q_num >= vport->num_txq)
+ return -EINVAL;
+
+ if (q_num < vport->num_rxq) {
+ struct iecm_queue *rxq = iecm_find_rxq(vport, q_num);
+
+ __iecm_get_q_coalesce(ec, rxq);
+ }
+
+ if (q_num < vport->num_txq) {
+ struct iecm_queue *txq = iecm_find_txq(vport, q_num);
+
+ __iecm_get_q_coalesce(ec, txq);
+ }
+
+ return 0;
+}
+
+/**
+ * iecm_get_coalesce - get ITR values as requested by user
+ * @netdev: pointer to the netdev associated with this query
+ * @ec: coalesce settings to be filled
+ *
+ * Return 0 on success, and negative on failure
+ */
+static int
+iecm_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec)
+{
+ /* Return coalesce based on queue number zero */
+ return iecm_get_q_coalesce(netdev, ec, 0);
+}
+
+/**
+ * iecm_get_per_q_coalesce - get ITR values as requested by user
+ * @netdev: pointer to the netdev associated with this query
+ * @q_num: queue for which the ITR values has to retrieved
+ * @ec: coalesce settings to be filled
+ *
+ * Return 0 on success, and negative on failure
+ */
+
+static int
+iecm_get_per_q_coalesce(struct net_device *netdev, u32 q_num,
+ struct ethtool_coalesce *ec)
+{
+ return iecm_get_q_coalesce(netdev, ec, q_num);
+}
+
+/**
+ * __iecm_set_q_coalesce - set ITR values for specific queue
+ * @ec: ethtool structure from user to update ITR settings
+ * @q: queue for which ITR values has to be set
+ *
+ * Returns 0 on success, negative otherwise.
+ */
+static int
+__iecm_set_q_coalesce(struct ethtool_coalesce *ec, struct iecm_queue *q)
+{
+ const char *q_type_str = (q->q_type == VIRTCHNL_QUEUE_TYPE_RX)
+ ? "Rx" : "Tx";
+ u32 use_adaptive_coalesce, coalesce_usecs;
+ struct iecm_vport *vport;
+ u16 itr_setting;
+
+ itr_setting = IECM_ITR_SETTING(q->itr.target_itr);
+ vport = q->vport;
+ if (q->q_type == VIRTCHNL_QUEUE_TYPE_RX) {
+ use_adaptive_coalesce = ec->use_adaptive_rx_coalesce;
+ coalesce_usecs = ec->rx_coalesce_usecs;
+ } else {
+ use_adaptive_coalesce = ec->use_adaptive_tx_coalesce;
+ coalesce_usecs = ec->tx_coalesce_usecs;
+ }
+
+ if (itr_setting != coalesce_usecs && use_adaptive_coalesce) {
+ netdev_info(vport->netdev, "%s ITR cannot be changed if
adaptive-%s is enabled\n",
+ q_type_str, q_type_str);
+ return -EINVAL;
+ }
+
+ if (coalesce_usecs > IECM_ITR_MAX) {
+ netdev_info(vport->netdev,
+ "Invalid value, %d-usecs range is 0-%d\n",
+ coalesce_usecs, IECM_ITR_MAX);
+ return -EINVAL;
+ }
+
+ /* hardware only supports an ITR granularity of 2us */
+ if (coalesce_usecs % 2 != 0) {
+ netdev_info(vport->netdev,
+ "Invalid value, %d-usecs must be even\n",
+ coalesce_usecs);
+ return -EINVAL;
+ }
+
+ q->itr.target_itr = coalesce_usecs;
+ if (use_adaptive_coalesce)
+ q->itr.target_itr |= IECM_ITR_DYNAMIC;
+ /* Update of static/dynamic ITR will be taken care when interrupt is
+ * fired
+ */
+ return 0;
+}
+
+/**
+ * iecm_set_q_coalesce - set ITR values for specific queue
+ * @vport: vport associated to the queue that need updating
+ * @ec: coalesce settings to program the device with
+ * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
+ * @is_rxq: is queue type Rx
+ *
+ * Return 0 on success, and negative on failure
+ */
+static int
+iecm_set_q_coalesce(struct iecm_vport *vport, struct ethtool_coalesce *ec,
+ int q_num, bool is_rxq)
+{
+ if (is_rxq) {
+ struct iecm_queue *rxq = iecm_find_rxq(vport, q_num);
+
+ if (rxq && __iecm_set_q_coalesce(ec, rxq))
+ return -EINVAL;
+ } else {
+ struct iecm_queue *txq = iecm_find_txq(vport, q_num);
+
+ if (txq && __iecm_set_q_coalesce(ec, txq))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * iecm_set_coalesce - set ITR values as requested by user
+ * @netdev: pointer to the netdev associated with this query
+ * @ec: coalesce settings to program the device with
+ *
+ * Return 0 on success, and negative on failure
+ */
+static int
+iecm_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ int i, err = 0;
+
+ if (vport->adapter->state != __IECM_UP)
+ return 0;
+
+ for (i = 0; i < vport->num_txq; i++) {
+ err = iecm_set_q_coalesce(vport, ec, i, false);
+ if (err)
+ goto set_coalesce_err;
+ }
+
+ for (i = 0; i < vport->num_rxq; i++) {
+ err = iecm_set_q_coalesce(vport, ec, i, true);
+ if (err)
+ goto set_coalesce_err;
+ }
+set_coalesce_err:
+ return err;
+}
+
+/**
+ * iecm_set_per_q_coalesce - set ITR values as requested by user
+ * @netdev: pointer to the netdev associated with this query
+ * @q_num: queue for which the ITR values has to be set
+ * @ec: coalesce settings to program the device with
+ *
+ * Return 0 on success, and negative on failure
+ */
+static int
+iecm_set_per_q_coalesce(struct net_device *netdev, u32 q_num,
+ struct ethtool_coalesce *ec)
+{
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+ int err;
+
+ if (vport->adapter->state != __IECM_UP)
+ return 0;
+
+ err = iecm_set_q_coalesce(vport, ec, q_num, false);
+ if (!err)
+ err = iecm_set_q_coalesce(vport, ec, q_num, true);
+
+ return err;
+}
+
+/**
+ * iecm_get_msglevel - Get debug message level
+ * @netdev: network interface device structure
+ *
+ * Returns current debug message level.
+ */
+static u32 iecm_get_msglevel(struct net_device *netdev)
+{
+ struct iecm_adapter *adapter = iecm_netdev_to_adapter(netdev);
+
+ return adapter->msg_enable;
+}
+
+/**
+ * iecm_set_msglevel - Set debug message level
+ * @netdev: network interface device structure
+ * @data: message level
+ *
+ * Set current debug message level. Higher values cause the driver to
+ * be noisier.
+ */
+static void iecm_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct iecm_adapter *adapter = iecm_netdev_to_adapter(netdev);
+
+ adapter->msg_enable = data;
+}
+
+/**
+ * iecm_get_link_ksettings - Get Link Speed and Duplex settings
+ * @netdev: network interface device structure
+ * @ecmd: ethtool command
+ *
+ * Reports speed/duplex settings.
+ **/
+static int iecm_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct iecm_netdev_priv *np = netdev_priv(netdev);
+ struct iecm_adapter *adapter = np->vport->adapter;
+
+ ethtool_link_ksettings_zero_link_mode(cmd, supported);
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ cmd->base.port = PORT_NONE;
+ /* Set speed and duplex */
+ switch (adapter->link_speed) {
+ case VIRTCHNL_LINK_SPEED_40GB:
+ cmd->base.speed = SPEED_40000;
+ break;
+ case VIRTCHNL_LINK_SPEED_25GB:
+#ifdef SPEED_25000
+ cmd->base.speed = SPEED_25000;
+#else
+ netdev_info(netdev,
+ "Speed is 25G, display not supported by this
version of ethtool.\n");
+#endif
+ break;
+ case VIRTCHNL_LINK_SPEED_20GB:
+ cmd->base.speed = SPEED_20000;
+ break;
+ case VIRTCHNL_LINK_SPEED_10GB:
+ cmd->base.speed = SPEED_10000;
+ break;
+ case VIRTCHNL_LINK_SPEED_1GB:
+ cmd->base.speed = SPEED_1000;
+ break;
+ case VIRTCHNL_LINK_SPEED_100MB:
+ cmd->base.speed = SPEED_100;
+ break;
+ default:
+ break;
+ }
+ cmd->base.duplex = DUPLEX_FULL;
+
+ return 0;
+}
+
+/**
+ * iecm_get_drvinfo - Get driver info
+ * @netdev: network interface device structure
+ * @drvinfo: ethtool driver info structure
+ *
+ * Returns information about the driver and device for display to the user.
+ */
+static void iecm_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct iecm_adapter *adapter = iecm_netdev_to_adapter(netdev);
+
+ strlcpy(drvinfo->driver, iecm_drv_name, 32);
+ strlcpy(drvinfo->fw_version, "N/A", 4);
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+}
+
+static const struct ethtool_ops iecm_ethtool_ops = {
+ .get_drvinfo = iecm_get_drvinfo,
+ .get_msglevel = iecm_get_msglevel,
+ .set_msglevel = iecm_set_msglevel,
+ .get_coalesce = iecm_get_coalesce,
+ .set_coalesce = iecm_set_coalesce,
+ .get_per_queue_coalesce = iecm_get_per_q_coalesce,
+ .set_per_queue_coalesce = iecm_set_per_q_coalesce,
+ .get_ethtool_stats = iecm_get_ethtool_stats,
+ .get_strings = iecm_get_strings,
+ .get_sset_count = iecm_get_sset_count,
+ .get_rxnfc = iecm_get_rxnfc,
+ .get_rxfh_key_size = iecm_get_rxfh_key_size,
+ .get_rxfh_indir_size = iecm_get_rxfh_indir_size,
+ .get_rxfh = iecm_get_rxfh,
+ .set_rxfh = iecm_set_rxfh,
+ .get_channels = iecm_get_channels,
+ .set_channels = iecm_set_channels,
+ .get_ringparam = iecm_get_ringparam,
+ .set_ringparam = iecm_set_ringparam,
+ .get_link_ksettings = iecm_get_link_ksettings,
+};
+
/**
* iecm_set_ethtool_ops - Initialize ethtool ops struct
* @netdev: network interface device structure
@@ -12,5 +1117,5 @@
*/
void iecm_set_ethtool_ops(struct net_device *netdev)
{
- /* stub */
+ netdev->ethtool_ops = &iecm_ethtool_ops;
}
diff --git a/drivers/net/ethernet/intel/iecm/iecm_lib.c
b/drivers/net/ethernet/intel/iecm/iecm_lib.c
index 707520553912..096f24fa2f15 100644
--- a/drivers/net/ethernet/intel/iecm/iecm_lib.c
+++ b/drivers/net/ethernet/intel/iecm/iecm_lib.c
@@ -764,7 +764,37 @@ void iecm_deinit_task(struct iecm_adapter *adapter)
static enum iecm_status
iecm_init_hard_reset(struct iecm_adapter *adapter)
{
- /* stub */
+ enum iecm_status err;
+
+ /* Prepare for reset */
+ if (test_bit(__IECM_HR_FUNC_RESET, adapter->flags)) {
+ iecm_deinit_task(adapter);
+ adapter->dev_ops.reg_ops.trigger_reset(adapter,
+ __IECM_HR_FUNC_RESET);
+ set_bit(__IECM_UP_REQUESTED, adapter->flags);
+ clear_bit(__IECM_HR_FUNC_RESET, adapter->flags);
+ } else if (test_bit(__IECM_HR_CORE_RESET, adapter->flags)) {
+ if (adapter->state == __IECM_UP)
+ set_bit(__IECM_UP_REQUESTED, adapter->flags);
+ iecm_deinit_task(adapter);
+ clear_bit(__IECM_HR_CORE_RESET, adapter->flags);
+ } else if (test_and_clear_bit(__IECM_HR_DRV_LOAD, adapter->flags)) {
+ /* Trigger reset */
+ } else {
+ dev_err(&adapter->pdev->dev, "Unhandled hard reset cause\n");
+ err = IECM_ERR_PARAM;
+ goto handle_err;
+ }
+
+ /* Reset is complete and so start building the driver resources again */
+ err = iecm_init_dflt_mbx(adapter);
+ if (err) {
+ dev_err(&adapter->pdev->dev, "Failed to initialize default
mailbox: %d\n",
+ err);
+ }
+handle_err:
+ mutex_unlock(&adapter->reset_lock);
+ return err;
}
/**
@@ -793,7 +823,57 @@ static void iecm_vc_event_task(struct work_struct *work)
int iecm_initiate_soft_reset(struct iecm_vport *vport,
enum iecm_flags reset_cause)
{
- /* stub */
+ struct iecm_adapter *adapter = vport->adapter;
+ enum iecm_state current_state;
+ enum iecm_status status;
+ int err = 0;
+
+ /* Make sure we do not end up in initiating multiple resets */
+ mutex_lock(&adapter->reset_lock);
+
+ current_state = vport->adapter->state;
+ switch (reset_cause) {
+ case __IECM_SR_Q_CHANGE:
+ /* If we're changing number of queues requested, we need to
+ * send a 'delete' message before freeing the queue resources.
+ * We'll send an 'add' message in adjust_qs which doesn't
+ * require the queue resources to be reallocated yet.
+ */
+ if (current_state <= __IECM_DOWN) {
+ iecm_send_delete_queues_msg(vport);
+ } else {
+ set_bit(__IECM_DEL_QUEUES, adapter->flags);
+ iecm_vport_stop(vport);
+ }
+ iecm_deinit_rss(vport);
+ status = adapter->dev_ops.vc_ops.adjust_qs(vport);
+ if (status) {
+ err = -EFAULT;
+ goto reset_failure;
+ }
+ iecm_intr_rel(adapter);
+ iecm_vport_calc_num_q_vec(vport);
+ iecm_intr_req(adapter);
+ break;
+ case __IECM_SR_Q_DESC_CHANGE:
+ iecm_vport_stop(vport);
+ iecm_vport_calc_num_q_desc(vport);
+ break;
+ case __IECM_SR_Q_SCH_CHANGE:
+ case __IECM_SR_MTU_CHANGE:
+ iecm_vport_stop(vport);
+ break;
+ default:
+ dev_err(&adapter->pdev->dev, "Unhandled soft reset cause\n");
+ err = -EINVAL;
+ goto reset_failure;
+ }
+
+ if (current_state == __IECM_UP)
+ err = iecm_vport_open(vport);
+reset_failure:
+ mutex_unlock(&adapter->reset_lock);
+ return err;
}
/**
@@ -884,6 +964,7 @@ int iecm_probe(struct pci_dev *pdev,
INIT_DELAYED_WORK(&adapter->init_task, iecm_init_task);
INIT_DELAYED_WORK(&adapter->vc_event_task, iecm_vc_event_task);
+ adapter->dev_ops.reg_ops.reset_reg_init(&adapter->reset_reg);
mutex_lock(&adapter->reset_lock);
set_bit(__IECM_HR_DRV_LOAD, adapter->flags);
err = iecm_init_hard_reset(adapter);
@@ -977,7 +1058,20 @@ static int iecm_open(struct net_device *netdev)
*/
static int iecm_change_mtu(struct net_device *netdev, int new_mtu)
{
- /* stub */
+ struct iecm_vport *vport = iecm_netdev_to_vport(netdev);
+
+ if (new_mtu < netdev->min_mtu) {
+ netdev_err(netdev, "new MTU invalid. min_mtu is %d\n",
+ netdev->min_mtu);
+ return -EINVAL;
+ } else if (new_mtu > netdev->max_mtu) {
+ netdev_err(netdev, "new MTU invalid. max_mtu is %d\n",
+ netdev->max_mtu);
+ return -EINVAL;
+ }
+ netdev->mtu = new_mtu;
+
+ return iecm_initiate_soft_reset(vport, __IECM_SR_MTU_CHANGE);
}
static const struct net_device_ops iecm_netdev_ops_splitq = {
--
2.26.2
