Ok, take 3. This splits out the PHYLINK change to a separate patch which should have no effect on functionality, and then adds the SGMII clean-ups (i.e. the missing initialisation) on top of that as a second patch.
As before, tested with a device where the CPU connection is RGMII (i.e. the common current use case) + one where the CPU connection is SGMII. I don't have any devices where the SGMII interface is brought out to something other than the CPU. v3: - Move phylink changes to separate patch - Address rmk review comments v2: - Switch to phylink - Avoid need for device tree configuration options Jonathan McDowell (2): net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB net: dsa: qca8k: Improve SGMII interface handling drivers/net/dsa/qca8k.c | 337 ++++++++++++++++++++++++++++------------ drivers/net/dsa/qca8k.h | 13 ++ 2 files changed, 252 insertions(+), 98 deletions(-) -- 2.20.1
