On Sat, 30 May 2020 at 02:45, David Miller <da...@davemloft.net> wrote:
>
> From: Vladimir Oltean <olte...@gmail.com>
> Date: Wed, 27 May 2020 19:40:06 +0300
>
> > From: Vladimir Oltean <vladimir.olt...@nxp.com>
> >
> > The dynamic configuration interface for the General Params and the L2
> > Lookup Params tables was copy-pasted between E/T devices and P/Q/R/S
> > devices. Nonetheless, these interfaces are bitwise different (and not to
> > mention, located at different SPI addresses).
> >
> > The driver is using dynamic reconfiguration of the General Parameters
> > table for the port mirroring feature, which was therefore broken on
> > P/Q/R/S.
> >
> > Note that I don't think this patch can be backported very far to stable
> > trees (since it conflicts with some other development done since the
> > introduction of the driver).
> >
> > Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2
> > switch")
> > Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com>
>
> Please fix the build errors reported by the kbuild robot.
So the kbuild robot said that it couldn't apply the patch on net, so
it tried on net-next and hit some further W=1 warnings.
So I've fixed the warnings and targeted the patch against net-next:
https://patchwork.ozlabs.org/project/netdev/cover/20200530102953.692780-1-olte...@gmail.com/
(I don't think anybody should care enough that they should deal with
the resulting conflicts from targeting against net).
Thanks,
-Vladimir
