Wed, May 27, 2020 at 02:01:39PM CEST, mick...@marvell.com wrote:
>Hi Vadym, Jiri,
>
>>
>> Hi Jiri,
>>
>> On Wed, May 27, 2020 at 07:53:05AM +0200, Jiri Pirko wrote:
>> > Tue, May 26, 2020 at 06:26:44PM CEST, vadym.koc...@plvision.eu wrote:
>> > >On Mon, May 11, 2020 at 01:23:46PM +0200, Jiri Pirko wrote:
>> > >> Fri, May 01, 2020 at 01:20:49AM CEST, vadym.koc...@plvision.eu wrote:
>> > >> >Add PCI interface driver for Prestera Switch ASICs family devices,
>> > >> >which
>> > >> >provides:
>> > >
>> > >[...]
>> > >>
>> > >> This looks very specific. Is is related to 0xC804?
>> > >>
>> > >Sorry, I missed this question. But I am not sure I got it.
>> >
>> > Is 0xC804 pci id of "Prestera AC3x 98DX326x"? If so and in future you
>> > add support for another chip/revision to this driver, the name
>> > "Prestera AC3x 98DX326x" would be incorrect. I suggest to use some
>> > more generic name, like "Prestera".
>>
>> We are planning to support addition devices within the same family of
>> 'Prestera AC3x' and therefore "Prestera AC3x 98DX32xx" is mentioned.
>> Additional families also up-coming: "Prestera ALD2 98DX84xx"
>>
>
>Vadym, Please attention we changed 98DX326x --> 98DX32xx
>
>Jiri, the 'Prestera" family includes several sub device families.
>we think we need to be more accurate with the actual devices that are
>supported.
Sure, that is why I think that the name should be probably more generic
as prestera_pci_devices is eventually going to contain more pci ids for
more chips of the same family
>
>> >
>> >
>> >
>> > >
>> > >>
>> > >> >+ .id_table = prestera_pci_devices,
>> > >> >+ .probe = prestera_pci_probe,
>> > >> >+ .remove = prestera_pci_remove,
>> > >> >+};
>> > >> >+
>> > >> >+static int __init prestera_pci_init(void) {
>> > >> >+ return pci_register_driver(&prestera_pci_driver);
>> > >> >+}
>> > >> >+
>> > >> >+static void __exit prestera_pci_exit(void) {
>> > >> >+ pci_unregister_driver(&prestera_pci_driver);
>> > >> >+}
>> > >> >+
>> > >> >+module_init(prestera_pci_init);
>> > >> >+module_exit(prestera_pci_exit);
>> > >> >+
>> > >> >+MODULE_AUTHOR("Marvell Semi.");
>> > >>
>> > >> Author is you, not a company.
>> > >>
>> > >>
>> > >> >+MODULE_LICENSE("Dual BSD/GPL");
>> > >> >+MODULE_DESCRIPTION("Marvell Prestera switch PCI interface");
>> > >> >--
>> > >> >2.17.1
>> > >> >
>>
