From: Fugang Duan <fugang.d...@nxp.com> Update the gpr property to define gpr register offset and bit in DT, since different instance have different gpr bit, and differnet SOC may have different gpr reigster offset.
Signed-off-by: Fugang Duan <fugang.d...@nxp.com> --- Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 26c492a..c2ea818 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -23,7 +23,12 @@ Optional properties: the hardware workaround for ERR006687 applied and does not need a software workaround. - gpr: phandle of SoC general purpose register mode. Required for wake on LAN - on some SoCs + on some SoCs. Register bits of stop mode control, the format is + <&gpr req_gpr req_bit>. + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset for ENET stop request. + req_bit is the gpr bit offset for ENET stop request. + -interrupt-names: names of the interrupts listed in interrupts property in the same order. The defaults if not specified are __Number of interrupts__ __Default__ -- 2.7.4
