Move the documentation for the TX delay above the PRG_ETH0_TXDLY_MASK
definition. Future commits will add more registers also with
documentation above their register bit definitions. Move the existing
comment so it will be consistent with the upcoming changes.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index c9ec0cb68082..1d7526ee09dd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -33,6 +33,10 @@
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
+/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where 8ns are exactly one
+ * cycle of the 125MHz RGMII TX clock):
+ * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
+ */
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
/* divider for the result of m250_sel */
@@ -248,10 +252,6 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac
*dwmac)
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
- /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
- * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
- * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
- */
tx_dly_val = dwmac->tx_delay_ns >> 1;
/* fall through */
--
2.26.2
