From: Vladimir Oltean <vladimir.olt...@nxp.com>
VLAN filtering is a global property for sja1105, and that means that we
rely on the DSA core to not call us more than once.
But we need to introduce some per-port state for the tagger, namely the
xmit_tpid, and the best place to do that is where the xmit_tpid changes,
namely in sja1105_vlan_filtering. So at the moment, exit early from the
function to avoid unnecessarily resetting the switch for each port call.
Then we'll change the xmit_tpid prior to the early exit in the next
patch.
Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
---
Changes in v3:
None.
Changes in v2:
None.
drivers/net/dsa/sja1105/sja1105_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c
b/drivers/net/dsa/sja1105/sja1105_main.c
index ca5a9baa0b2f..7b9c3db98e1d 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2158,6 +2158,9 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds,
int port, bool enabled)
else
state = SJA1105_VLAN_FILTERING_FULL;
+ if (priv->vlan_state == state)
+ return 0;
+
priv->vlan_state = state;
table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS];
--
2.17.1
