From: Vladimir Oltean <vladimir.olt...@nxp.com> The initial purpose of this series was to implement the .flow_dissect method for sja1105 and for ocelot/felix. But on Felix this posed a problem, as the DSA headers were of different lengths on RX and on TX. A better solution than to just increase the smaller one was to also try to shrink the larger one, but in turn that required the DSA master to be put in promiscuous mode (which sja1105 also needed, for other reasons).
Finally, we can add the missing .flow_dissect methods to ocelot and sja1105 (as well as generalize the formula to other taggers as well). Vladimir Oltean (4): net: dsa: allow drivers to request promiscuous mode on master net: dsa: sja1105: request promiscuous mode for master net: dsa: tag_ocelot: use a short prefix on both ingress and egress net: dsa: implement and use a generic procedure for the flow dissector drivers/net/dsa/ocelot/felix.c | 5 ++-- drivers/net/dsa/sja1105/sja1105_main.c | 3 ++ include/net/dsa.h | 13 +++++++++ net/dsa/dsa_priv.h | 22 +++++++++++++++ net/dsa/master.c | 39 +++++++++++++++++++++++++- net/dsa/tag_ar9331.c | 9 ++++++ net/dsa/tag_brcm.c | 5 ++-- net/dsa/tag_dsa.c | 4 +-- net/dsa/tag_edsa.c | 4 +-- net/dsa/tag_lan9303.c | 9 ++++++ net/dsa/tag_mtk.c | 3 +- net/dsa/tag_ocelot.c | 29 +++++++++++++++---- net/dsa/tag_qca.c | 3 +- net/dsa/tag_sja1105.c | 13 +++++++++ 14 files changed, 143 insertions(+), 18 deletions(-) -- 2.17.1
