From: Vladimir Oltean <vladimir.olt...@nxp.com>
Let the DSA core call our .port_vlan_add methods every time the bridge
layer requests so. We will deal internally with saving/restoring VLANs
depending on our VLAN awareness state.
Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com>
---
Changes in v2:
Adapt to variable name change.
drivers/net/dsa/sja1105/sja1105_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c
b/drivers/net/dsa/sja1105/sja1105_main.c
index c0f11a185f31..d2755ab2853d 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2358,6 +2358,8 @@ static int sja1105_setup(struct dsa_switch *ds)
ds->mtu_enforcement_ingress = true;
+ ds->configure_vlans_while_disabled = true;
+
/* The DSA/switchdev model brings up switch ports in standalone mode by
* default, and that means vlan_filtering is 0 since they're not under
* a bridge, so it's safe to set up switch tagging at this time.
--
2.17.1
