Hi Russell,
Quoting Russell King - ARM Linux admin <li...@armlinux.org.uk>:
Hi René,
On Sat, Aug 24, 2019 at 01:11:17PM +0000, René van Dorst wrote:
Hi Russell,
Mediatek calls it Turbo RGMII. It is a overclock version of RGMII mode.
It is used between first GMAC and port 6 of the mt7530 switch. Can be used
with
an internal and an external mt7530 switch.
TRGMII speed are:
* mt7621: 1200Mbit
* mt7623: 2000Mbit and 2600Mbit.
I think that TRGMII is only used in a fixed-link situation in combination
with a
mt7530 switch and running and maximum speed/full duplex. So reporting
1000baseT_Full seems to me the right option.
I think we can ignore this one for the purposes of merging this patch
set, since this seems to be specific to this setup. Neither 1000BaseT
nor 1000BaseX fit very well, but we have to choose something.
PHY_INTERFACE_MODE_GMII:
10baseT_Half
10baseT_Full
100baseT_Half
100baseT_Full
1000baseT_Half
1000baseT_Full
I think GMII can be connected to a PHY that can convert to 1000BaseX, so
should probably include that here too.
Thanks for reviewing.
I shall add that too.
I send v4 today.
Greats,
René
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
