Hello Heiner - On 7/28/19 11:25 AM, Heiner Kallweit wrote:
There was a previous attempt to use xmit_more, but the change had to be reverted because under load sometimes a transmit timeout occurred [0]. Maybe this was caused by a missing memory barrier, the new attempt keeps the memory barrier before the call to netif_stop_queue like it is used by the driver as of today. The new attempt also changes the order of some calls as suggested by Eric. [0] https://lkml.org/lkml/2019/2/10/39 Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
I decided to take one for the team and merged this into my 5.2.x tree (just fixing up the path) and it has been working fine for the last 2 weeks in two machines..until today, when for the first time in forever some random NFS traffic made this old friend come out from under the couch: [Aug 8 14:13] ------------[ cut here ]------------ [ +0.000006] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out [ +0.000021] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x21f/0x230 [ +0.000001] Modules linked in: lz4 lz4_compress lz4_decompress nfsd auth_rpcgss oid_registry lockd grace sunrpc sch_fq_codel btrfs xor zstd_compress raid6_pq zstd_decompress bfq jitterentropy_rng nct6775 hwmon_vid coretemp hwmon x86_pkg_temp_thermal aesni_intel aes_x86_64 i915 glue_helper crypto_simd cryptd i2c_i801 intel_gtt i2c_algo_bit iosf_mbi drm_kms_helper syscopyarea usbhid sysfillrect r8169 sysimgblt fb_sys_fops realtek drm libphy drm_panel_orientation_quirks i2c_core video backlight mq_deadline [ +0.000026] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.2.7 #1 [ +0.000001] Hardware name: System manufacturer System Product Name/P8Z68-V LX, BIOS 4105 07/01/2013 [ +0.000004] RIP: 0010:dev_watchdog+0x21f/0x230 [ +0.000002] Code: 3b 00 75 ea eb ad 4c 89 ef c6 05 1c 45 bd 00 01 e8 66 35 fc ff 44 89 e1 4c 89 ee 48 c7 c7 e8 5e fc 81 48 89 c2 e8 90 df 92 ff <0f> 0b eb 8e 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 66 66 66 66 90 [ +0.000002] RSP: 0018:ffffc90000118e68 EFLAGS: 00010286 [ +0.000002] RAX: 0000000000000000 RBX: ffff8887f7837600 RCX: 0000000000000303 [ +0.000001] RDX: 0000000000000001 RSI: 0000000000000092 RDI: ffffffff827a488c [ +0.000001] RBP: ffff8887f9fbc440 R08: 0000000000000303 R09: 0000000000000003 [ +0.000001] R10: 000000000001004c R11: 0000000000000001 R12: 0000000000000000 [ +0.000009] R13: ffff8887f9fbc000 R14: ffffffff8173aa20 R15: dead000000000200 [ +0.000001] FS: 0000000000000000(0000) GS:ffff8887ff580000(0000) knlGS:0000000000000000 [ +0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f8d1c04d000 CR3: 0000000002209001 CR4: 00000000000606e0 [ +0.000000] Call Trace: [ +0.000002] <IRQ> [ +0.000005] call_timer_fn+0x2b/0x120 [ +0.000002] expire_timers+0xa4/0x100 [ +0.000001] run_timer_softirq+0x8c/0x170 [ +0.000002] ? __hrtimer_run_queues+0x13a/0x290 [ +0.000003] ? sched_clock_cpu+0xe/0x130 [ +0.000003] __do_softirq+0xeb/0x2de [ +0.000003] irq_exit+0x9d/0xe0 [ +0.000002] smp_apic_timer_interrupt+0x60/0x110 [ +0.000003] apic_timer_interrupt+0xf/0x20 [ +0.000001] </IRQ> [ +0.000003] RIP: 0010:cpuidle_enter_state+0xad/0x930 [ +0.000001] Code: c5 66 66 66 66 90 31 ff e8 90 99 9e ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 39 08 00 00 31 ff e8 e7 26 a2 ff fb 45 85 e4 <0f> 88 34 02 00 00 49 63 cc 4c 2b 2c 24 48 8d 04 49 48 c1 e0 05 8b [ +0.000000] RSP: 0018:ffffc9000008be50 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ +0.000001] RAX: ffff8887ff5a9180 RBX: ffffffff822b6c40 RCX: 000000000000001f [ +0.000001] RDX: 0000000000000000 RSI: 0000000033087154 RDI: 0000000000000000 [ +0.000001] RBP: ffff8887ff5b1310 R08: 000030d021fae397 R09: ffff8887ff59c8c0 [ +0.000000] R10: ffff8887ff59c8c0 R11: 0000000000000006 R12: 0000000000000004 [ +0.000001] R13: 000030d021fae397 R14: 0000000000000004 R15: ffff8887fc281600 [ +0.000001] cpuidle_enter+0x29/0x40 [ +0.000002] do_idle+0x1e5/0x280 [ +0.000001] cpu_startup_entry+0x19/0x20 [ +0.000002] start_secondary+0x186/0x1c0 [ +0.000001] secondary_startup_64+0xa4/0xb0 [ +0.000001] ---[ end trace 99493c768580f4fd ]--- The device is: Aug 7 23:19:09 tux kernel: libphy: r8169: probed Aug 7 23:19:09 tux kernel: r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, c8:60:00:68:33:cc, XID 2c9, IRQ 36 Aug 7 23:19:09 tux kernel: r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] Aug 7 23:19:12 tux kernel: RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) Aug 7 23:19:13 tux kernel: r8169 0000:04:00.0 eth0: No native access to PCI extended config space, falling back to CSI and using fq_codel, of course. This cpuidle hiccup used to be completely gone without xmit_more and this was the first (and so far only) time since merging it (regardless of load). Also, while I'm using BMQ as CPU scheduler, that hasn't made a difference for this particular problem in the past (with MuQSS/PDS) either; way back when I had Eric's previous attempt(s) it also hiccupped with CFS. Revert or wait for more reports when -next is merged in 5.4? thanks, Holger
