Eric Dumazet <[email protected]> wrote:
>A bonding master can be up while best_slave is NULL.
>
>[12105.636318] BUG: unable to handle kernel NULL pointer dereference at
>0000000000000000
>[12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1
>[12105.648984] IP: bond_select_active_slave+0x125/0x250
>[12105.653977] PGD 0 P4D 0
>[12105.656572] Oops: 0000 [#1] SMP PTI
>[12105.660487] gsmi: Log Shutdown Reason 0x03
>[12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat
>stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num
>stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm
>ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last
>unloaded: kvm_intel]
>[12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2
>[12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1
>[12105.685700] mlx4_en: eth2: Link Up (linkstate)
>[12105.724452] Workqueue: bond0 bond_mii_monitor
>[12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250
>[12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246
>[12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX:
>0000000000000000
>[12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI:
>ffff8c62b03c6000
>[12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09:
>ffff8c517d387600
>[12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12:
>0000000000000000
>[12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15:
>0000000000000000
>[12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000)
>knlGS:0000000000000000
>[12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4:
>00000000001626f0
>[12105.796976] Call Trace:
>[12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0
>[12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370
>[12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360
>[12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140
>[12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380
>[12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0
>[12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60
>
>Fixes: e2a7420df2e0 ("bonding/main: convert to using slave printk macros")
>Signed-off-by: Eric Dumazet <[email protected]>
>Reported-by: John Sperbeck <[email protected]>
>Cc: Jarod Wilson <[email protected]>
>CC: Jay Vosburgh <[email protected]>
>CC: Veaceslav Falico <[email protected]>
>CC: Andy Gospodarek <[email protected]>
>---
> drivers/net/bonding/bond_main.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index
>a30595955a37a485b9e045a31969313f8336b668..84168455aded96dfd85b310841dee2a0d917b580
> 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -937,7 +937,7 @@ void bond_select_active_slave(struct bonding *bond)
> return;
>
> if (netif_carrier_ok(bond->dev))
>- slave_info(bond->dev, best_slave->dev, "active
>interface up!\n");
>+ netdev_info(bond->dev, "active interface up!\n");
> else
> netdev_info(bond->dev, "now running without any active
> interface!\n");
> }
What is the bonding mode and options in the failure case?
I see that the fix is fine in the sense that it returns to the
original status quo for the message.
However, the code path seems odd; if best_slave is NULL, that
means that bond_find_best_slave() saw all slaves as down, but if
netif_carrier_ok is true, then bond_set_carrier() did not.
-J
---
-Jay Vosburgh, [email protected]
