The 06/18/2019 18:31, Parav Pandit wrote:
>
>
> > -----Original Message-----
> > From: netdev-ow...@vger.kernel.org <netdev-ow...@vger.kernel.org> On
> > Behalf Of Saeed Mahameed
> > Sent: Tuesday, June 18, 2019 12:53 AM
> > To: Saeed Mahameed <sae...@mellanox.com>; Leon Romanovsky
> > <leo...@mellanox.com>
> > Cc: netdev@vger.kernel.org; linux-r...@vger.kernel.org; Jianbo Liu
> > <jian...@mellanox.com>; Eli Britstein <el...@mellanox.com>; Roi Dayan
> > <r...@mellanox.com>; Mark Bloch <ma...@mellanox.com>
> > Subject: [PATCH mlx5-next 05/15] net/mlx5: E-Switch, Tag packet with vport
> > number in VF vports and uplink ingress ACLs
> >
> > From: Jianbo Liu <jian...@mellanox.com>
> >
> > When a dual-port VHCA sends a RoCE packet on its non-native port, and the
> > packet arrives to its affiliated vport FDB, a mismatch might occur on the
> > rules
> > that match the packet source vport as it is not represented by single VHCA
> > only
> > in this case. So we change to match on metadata instead of source vport.
> > To do that, a rule is created in all vports and uplink ingress ACLs, to
> > save the
> > source vport number and vhca id in the packet's metadata in order to match
> > on
> > it later.
> > The metadata register used is the first of the 32-bit type C registers. It
> > can be
> > used for matching and header modify operations. The higher 16 bits of this
> > register are for vhca id, and the lower 16 ones is for vport number.
> > This change is not for dual-port RoCE only. If HW and FW allow, the vport
> > metadata matching is enabled by default.
> >
> > Signed-off-by: Jianbo Liu <jian...@mellanox.com>
> > Reviewed-by: Eli Britstein <el...@mellanox.com>
> > Reviewed-by: Roi Dayan <r...@mellanox.com>
> > Reviewed-by: Mark Bloch <ma...@mellanox.com>
> > Signed-off-by: Saeed Mahameed <sae...@mellanox.com>
> > ---
> > .../net/ethernet/mellanox/mlx5/core/eswitch.c | 2 +
> > .../net/ethernet/mellanox/mlx5/core/eswitch.h | 9 +
> > .../mellanox/mlx5/core/eswitch_offloads.c | 183 ++++++++++++++----
> > include/linux/mlx5/eswitch.h | 3 +
> > 4 files changed, 161 insertions(+), 36 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
> > b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
> > index a42a23e505df..1235fd84ae3a 100644
> > --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
...
> > + err = esw_vport_egress_prio_tag_config(esw, vport);
> > + if (err)
> > + goto err_egress;
> > + }
> > }
> >
> > + if (mlx5_eswitch_vport_match_metadata_enabled(esw))
> > + esw_info(esw->dev, "Use metadata reg_c as source vport to
> > match\n");
> > +
> > return 0;
> >
> > err_egress:
> > esw_vport_disable_ingress_acl(esw, vport);
> > err_ingress:
> > - mlx5_esw_for_each_vf_vport_reverse(esw, j, vport, i - 1) {
> > + for (j = MLX5_VPORT_PF; j < i; j++) {
> Keep the reverse order as before.
The vports are independent from each other. It doesn't matter disabling
them in or out of order. I don't understand what's the benifit.
>
> > + vport = &esw->vports[j];
> > esw_vport_disable_egress_acl(esw, vport);
> > esw_vport_disable_ingress_acl(esw, vport);
> > }
> > @@ -1704,15 +1800,17 @@ static int esw_prio_tag_acls_config(struct
> > mlx5_eswitch *esw, int nvports)
> > return err;
> > }
> >
> > -static void esw_prio_tag_acls_cleanup(struct mlx5_eswitch *esw)
> > +static void esw_destroy_offloads_acl_tables(struct mlx5_eswitch *esw)
> > {
> > struct mlx5_vport *vport;
> > int i;
> >
> > - mlx5_esw_for_each_vf_vport(esw, i, vport, esw->nvports) {
> > + mlx5_esw_for_all_vports(esw, i, vport) {
> If you are changing this, please do in reverse order to keep it exact mirror
> of create/enable sequence.
Same...
>
> > esw_vport_disable_egress_acl(esw, vport);
> > esw_vport_disable_ingress_acl(esw, vport);
> > }
> > +
> > + esw->flags &= ~MLX5_ESWITCH_VPORT_MATCH_METADATA;
> > }
> >
> > static int esw_offloads_steering_init(struct mlx5_eswitch *esw, int
> > nvports)
