From: Robert Hancock <hanc...@sedsystems.ca> Date: Tue, 4 Jun 2019 16:15:01 -0600
> Add 1000BaseX to the link modes which are detected based on the > MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which > support 1000BaseX to work properly with drivers using phylink. > > Previously 1000BaseX support was not detected, and if that was the only > mode the PHY indicated support for, phylink would refuse to attach it > due to the list of supported modes being empty. > > Signed-off-by: Robert Hancock <hanc...@sedsystems.ca> Applied, thanks.
