The kernel can now indicate if the PHY supports operating over a
single pair at 100Mbps or 1000Mbps.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
ethtool.8.in | 2 ++
ethtool.c | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/ethtool.8.in b/ethtool.8.in
index 430d11b915af..6af63455c636 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -639,8 +639,10 @@ lB l lB.
0x002 10baseT Full
0x004 100baseT Half
0x008 100baseT Full
+0x80000000000000000 100baseT1 Full
0x010 1000baseT Half (not supported by IEEE standards)
0x020 1000baseT Full
+0x100000000000000000 1000baseT1 Full
0x20000 1000baseKX Full
0x20000000000 1000baseX Full
0x800000000000 2500baseT Full
diff --git a/ethtool.c b/ethtool.c
index 66a907edd97b..05fe05a080cd 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -545,6 +545,8 @@ static void init_global_link_mode_masks(void)
ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT,
ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT,
ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT,
+ ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseT1_Full_BIT,
};
static const enum ethtool_link_mode_bit_indices
additional_advertised_flags_bits[] = {
@@ -634,10 +636,14 @@ static void dump_link_caps(const char *prefix, const char
*an_prefix,
"100baseT/Half" },
{ 1, ETHTOOL_LINK_MODE_100baseT_Full_BIT,
"100baseT/Full" },
+ { 0, ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
+ "100baseT1/Full" },
{ 0, ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
"1000baseT/Half" },
{ 1, ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
"1000baseT/Full" },
+ { 0, ETHTOOL_LINK_MODE_1000baseT1_Full_BIT,
+ "1000baseT1/Full" },
{ 0, ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
"1000baseKX/Full" },
{ 0, ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
--
2.20.1
