On 27/05/2019 14.32, Vivien Didelot wrote:
> Hi Rasmus,
>
> On Mon, 27 May 2019 09:36:13 +0000, Rasmus Villemoes
> <rasmus.villem...@prevas.dk> wrote:
>> Looking through the data sheets comparing the mv88e6240 and 6250, I
>> noticed that they have the exact same description of the G1_IEEE_PRI
>> register (global1, offset 0x18). However, the current code used by 6240 does
>>
>> int mv88e6085_g1_ieee_pri_map(struct mv88e6xxx_chip *chip)
>> {
>> /* Reset the IEEE Tag priorities to defaults */
>> return mv88e6xxx_g1_write(chip, MV88E6XXX_G1_IEEE_PRI, 0xfa41);
>> }
>>
>> while if my reading of the data sheet is correct, the reset value is
>> really 0xfa50 (fields 7:6 and 5:4 are RWS to 0x1, field 3:2 and 1:0 are
>> RWR) - and this is also the value I read from the 6250 on our old BSP
>> with an out-of-tree driver that doesn't touch that register. This seems
>> to go way back (at least 3b1588593097). Should this be left alone for
>> not risking breaking existing setups (just updating the comment), or can
>> we make the code match the comment? Or am I just reading this all wrong?
>
> If the reset value isn't the same, the bits are certainly differently
> organized inside this register, so the proper way would be to add a
> mv88e6240_g1_ieee_pri_map function, used by both 88E6240 and 88E6250.
>
Based on the very systematic description [ieee tags 7 and 6 are mapped
to 3, 5 and 4 to 2, 3 and 2 to 1, and 1 and 0 to 0], I strongly believe
that 0xfa50 is also the reset value for the 6085, so this is most likely
wrong for all the current chips - though I don't have a 6085 data sheet.
I can certainly add a 6250 variant that does the right thing for the
6250, and I probably will - this is more a question about the current code.
> I'm not a big fan of rewriting the default values, but that is the
> way we chose until we make actually use of these tag priority bits.
Yes, I was wondering why there's a lot of code which simply serves to
set default values - but I guess it makes sense to force the switch into
a known state in case the bootloader did something odd.
Rasmus
