On Mon, Apr 29, 2019 at 11:34:53AM +0300, Leon Romanovsky wrote:
> From: Mark Zhang <ma...@mellanox.com>
>
> This patch adds the ability to return the hwstats of per-port default
> counters (which can also be queried through sysfs nodes).
>
> Signed-off-by: Mark Zhang <ma...@mellanox.com>
> Signed-off-by: Leon Romanovsky <leo...@mellanox.com>
> drivers/infiniband/core/nldev.c | 101 +++++++++++++++++++++++++++++++-
> 1 file changed, 99 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
> index 53c1d2d82a06..cb2dd38f49f1 100644
> +++ b/drivers/infiniband/core/nldev.c
> @@ -1709,6 +1709,98 @@ static int nldev_stat_del_doit(struct sk_buff *skb,
> struct nlmsghdr *nlh,
> return ret;
> }
>
> +static int nldev_res_get_default_counter_doit(struct sk_buff *skb,
> + struct nlmsghdr *nlh,
> + struct netlink_ext_ack *extack,
> + struct nlattr *tb[])
> +{
> + struct rdma_hw_stats *stats;
> + struct nlattr *table_attr;
> + struct ib_device *device;
> + int ret, num_cnts, i;
> + struct sk_buff *msg;
> + u32 index, port;
> + u64 v;
> +
> + if (!tb[RDMA_NLDEV_ATTR_DEV_INDEX] || !tb[RDMA_NLDEV_ATTR_PORT_INDEX])
> + return -EINVAL;
> +
> + index = nla_get_u32(tb[RDMA_NLDEV_ATTR_DEV_INDEX]);
> + device = ib_device_get_by_index(sock_net(skb->sk), index);
> + if (!device)
> + return -EINVAL;
> +
> + if (!device->ops.alloc_hw_stats || !device->ops.get_hw_stats) {
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + port = nla_get_u32(tb[RDMA_NLDEV_ATTR_PORT_INDEX]);
> + if (!rdma_is_port_valid(device, port)) {
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
> + if (!msg) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + nlh = nlmsg_put(msg, NETLINK_CB(skb).portid, nlh->nlmsg_seq,
> + RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
> + RDMA_NLDEV_CMD_STAT_GET),
> + 0, 0);
> +
> + if (fill_nldev_handle(msg, device) ||
> + nla_put_u32(msg, RDMA_NLDEV_ATTR_PORT_INDEX, port)) {
> + ret = -EMSGSIZE;
> + goto err_msg;
> + }
> +
> + stats = device->ops.alloc_hw_stats(device, port);
> + if (!stats) {
> + ret = -ENOMEM;
> + goto err_msg;
> + }
Why do we need yet another one of these to be allocated?
> + num_cnts = device->ops.get_hw_stats(device, stats, port, 0);
Is '0' right here?
Jason
