This patch adds two load parameters napi and ufo. Previously NAPI was
compilation option with these changes wan enable disable NAPI using load
parameter. Also we are introducing ufo load parameter to enable/disable
ufo feature
Signed-off-by: Sivakumar Subramani <[EMAIL PROTECTED]>
---
diff -urpN orig/drivers/net/s2io.c patch1/drivers/net/s2io.c
--- orig/drivers/net/s2io.c 2006-12-21 10:06:58.000000000 +0530
+++ patch1/drivers/net/s2io.c 2007-01-08 11:56:23.000000000 +0530
@@ -401,9 +401,10 @@ S2IO_PARM_INT(lro, 0);
* aggregation happens until we hit max IP pkt size(64K)
*/
S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
-#ifndef CONFIG_S2IO_NAPI
S2IO_PARM_INT(indicate_max_pkts, 0);
-#endif
+
+S2IO_PARM_INT(napi, 1);
+S2IO_PARM_INT(ufo, 0);
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
@@ -2275,9 +2276,7 @@ static int fill_rx_buffers(struct s2io_n
struct config_param *config;
u64 tmp;
buffAdd_t *ba;
-#ifndef CONFIG_S2IO_NAPI
unsigned long flags;
-#endif
RxD_t *first_rxdp = NULL;
mac_control = &nic->mac_control;
@@ -2321,12 +2320,15 @@ static int fill_rx_buffers(struct s2io_n
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
-#ifndef CONFIG_S2IO_NAPI
- spin_lock_irqsave(&nic->put_lock, flags);
- mac_control->rings[ring_no].put_pos =
- (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
- spin_unlock_irqrestore(&nic->put_lock, flags);
-#endif
+ if(!napi) {
+ spin_lock_irqsave(&nic->put_lock, flags);
+ mac_control->rings[ring_no].put_pos =
+ (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
+ spin_unlock_irqrestore(&nic->put_lock, flags);
+ } else {
+ mac_control->rings[ring_no].put_pos =
+ (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
+ }
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
((nic->rxd_mode >= RXD_MODE_3A) &&
(rxdp->Control_2 & BIT(0)))) {
@@ -2569,7 +2571,7 @@ static void free_rx_buffers(struct s2io_
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-#if defined(CONFIG_S2IO_NAPI)
+#if defined(HAVE_NETDEV_POLL)
static int s2io_poll(struct net_device *dev, int *budget)
{
nic_t *nic = dev->priv;
@@ -2708,9 +2710,7 @@ static void rx_intr_handler(ring_info_t
rx_curr_get_info_t get_info, put_info;
RxD_t *rxdp;
struct sk_buff *skb;
-#ifndef CONFIG_S2IO_NAPI
int pkt_cnt = 0;
-#endif
int i;
spin_lock(&nic->rx_lock);
@@ -2726,16 +2726,16 @@ static void rx_intr_handler(ring_info_t
put_info = ring_data->rx_curr_put_info;
put_block = put_info.block_index;
rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
-#ifndef CONFIG_S2IO_NAPI
- spin_lock(&nic->put_lock);
- put_offset = ring_data->put_pos;
- spin_unlock(&nic->put_lock);
-#else
- put_offset = (put_block * (rxd_count[nic->rxd_mode] + 1)) +
- put_info.offset;
-#endif
+ if (!napi) {
+ spin_lock(&nic->put_lock);
+ put_offset = ring_data->put_pos;
+ spin_unlock(&nic->put_lock);
+ } else
+ put_offset = ring_data->put_pos;
+
while (RXD_IS_UP2DT(rxdp)) {
- /* If your are next to put index then it's FIFO full condition
*/
+ /* If your are next to put index then it's
+ FIFO full condition */
if ((get_block == put_block) &&
(get_info.offset + 1) == put_info.offset) {
DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name);
@@ -2793,15 +2793,12 @@ static void rx_intr_handler(ring_info_t
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
-#ifdef CONFIG_S2IO_NAPI
nic->pkts_to_process -= 1;
- if (!nic->pkts_to_process)
+ if ((napi) && (!nic->pkts_to_process))
break;
-#else
pkt_cnt++;
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
break;
-#endif
}
if (nic->lro) {
/* Clear all LRO sessions before exiting */
@@ -4196,26 +4193,26 @@ static irqreturn_t s2io_isr(int irq, voi
org_mask = readq(&bar0->general_int_mask);
writeq(val64, &bar0->general_int_mask);
-#ifdef CONFIG_S2IO_NAPI
- if (reason & GEN_INTR_RXTRAFFIC) {
- if (netif_rx_schedule_prep(dev)) {
- writeq(val64, &bar0->rx_traffic_mask);
- __netif_rx_schedule(dev);
+ if (napi) {
+ if (reason & GEN_INTR_RXTRAFFIC) {
+ if (netif_rx_schedule_prep(dev)) {
+ writeq(val64, &bar0->rx_traffic_mask);
+ __netif_rx_schedule(dev);
+ }
+ }
+ } else {
+ /*
+ * Rx handler is called by default, without checking for the
+ * cause of interrupt.
+ * rx_traffic_int reg is an R1 register, writing all 1's
+ * will ensure that the actual interrupt causing bit get's
+ * cleared and hence a read can be avoided.
+ */
+ writeq(val64, &bar0->rx_traffic_int);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ rx_intr_handler(&mac_control->rings[i]);
}
}
-#else
- /*
- * Rx handler is called by default, without checking for the
- * cause of interrupt.
- * rx_traffic_int reg is an R1 register, writing all 1's
- * will ensure that the actual interrupt causing bit get's
- * cleared and hence a read can be avoided.
- */
- writeq(val64, &bar0->rx_traffic_int);
- for (i = 0; i < config->rx_ring_num; i++) {
- rx_intr_handler(&mac_control->rings[i]);
- }
-#endif
/*
* tx_traffic_int reg is an R1 register, writing all 1's
@@ -4234,11 +4231,14 @@ static irqreturn_t s2io_isr(int irq, voi
* reallocate the buffers from the interrupt handler itself,
* else schedule a tasklet to reallocate the buffers.
*/
-#ifndef CONFIG_S2IO_NAPI
- for (i = 0; i < config->rx_ring_num; i++)
- s2io_chk_rx_buffers(sp, i);
-#endif
- writeq(org_mask, &bar0->general_int_mask);
+ if (!napi) {
+ for (i = 0; i < config->rx_ring_num; i++)
+ s2io_chk_rx_buffers(sp, i);
+ }
+
+ writeq(0, &bar0->general_int_mask);
+ readl(&bar0->general_int_status);
+
atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
@@ -6583,23 +6583,21 @@ static int rx_osm_handler(ring_info_t *r
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
-#ifdef CONFIG_S2IO_NAPI
- if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
- /* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_receive_skb(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- } else {
- netif_receive_skb(skb);
- }
-#else
if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
/* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_rx(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
+ if (napi)
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ else
+ vlan_hwaccel_rx(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+
} else {
- netif_rx(skb);
+ if (napi)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
}
-#endif
} else {
send_up:
queue_rx_frame(skb);
@@ -6700,13 +6698,9 @@ static int s2io_verify_parm(struct pci_d
DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n");
rx_ring_num = 8;
}
-#ifdef CONFIG_S2IO_NAPI
- if (*dev_intr_type != INTA) {
- DBG_PRINT(ERR_DBG, "s2io: NAPI cannot be enabled when "
- "MSI/MSI-X is enabled. Defaulting to INTA\n");
- *dev_intr_type = INTA;
- }
-#endif
+ if (*dev_intr_type != INTA)
+ napi = 0;
+
#ifndef CONFIG_PCI_MSI
if (*dev_intr_type != INTA) {
DBG_PRINT(ERR_DBG, "s2io: This kernel does not support"
@@ -6967,7 +6961,7 @@ s2io_init_nic(struct pci_dev *pdev, cons
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
-#if defined(CONFIG_S2IO_NAPI)
+#if defined(HAVE_NETDEV_POLL)
dev->poll = s2io_poll;
dev->weight = 32;
#endif
@@ -6985,7 +6979,7 @@ s2io_init_nic(struct pci_dev *pdev, cons
#ifdef NETIF_F_TSO6
dev->features |= NETIF_F_TSO6;
#endif
- if (sp->device_type & XFRAME_II_DEVICE) {
+ if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
@@ -7066,9 +7060,9 @@ s2io_init_nic(struct pci_dev *pdev, cons
/* Initialize spinlocks */
spin_lock_init(&sp->tx_lock);
-#ifndef CONFIG_S2IO_NAPI
- spin_lock_init(&sp->put_lock);
-#endif
+
+ if (!napi)
+ spin_lock_init(&sp->put_lock);
spin_lock_init(&sp->rx_lock);
/*
@@ -7129,9 +7123,9 @@ s2io_init_nic(struct pci_dev *pdev, cons
dev->name);
break;
}
-#ifdef CONFIG_S2IO_NAPI
- DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
-#endif
+
+ if (napi)
+ DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
switch(sp->intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
@@ -7146,7 +7140,9 @@ s2io_init_nic(struct pci_dev *pdev, cons
if (sp->lro)
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
dev->name);
-
+ if (ufo)
+ DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
+ " enabled\n", dev->name);
/* Initialize device name */
sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
@@ -7548,11 +7544,10 @@ static void queue_rx_frame(struct sk_buf
struct net_device *dev = skb->dev;
skb->protocol = eth_type_trans(skb, dev);
-#ifdef CONFIG_S2IO_NAPI
- netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
+ if (napi)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
}
static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb,
diff -urpN orig/drivers/net/s2io.h patch1/drivers/net/s2io.h
--- orig/drivers/net/s2io.h 2006-12-18 11:34:02.000000000 +0530
+++ patch1/drivers/net/s2io.h 2007-01-09 14:33:06.000000000 +0530
@@ -616,10 +616,8 @@ typedef struct ring_info {
*/
rx_curr_get_info_t rx_curr_get_info;
-#ifndef CONFIG_S2IO_NAPI
/* Index to the absolute position of the put pointer of Rx ring */
int put_pos;
-#endif
/* Buffer Address store. */
buffAdd_t **ba;
@@ -738,13 +736,11 @@ typedef struct lro {
/* Structure representing one instance of the NIC */
struct s2io_nic {
int rxd_mode;
-#ifdef CONFIG_S2IO_NAPI
/*
* Count of packets to be processed in a given iteration, it will be
indicated
* by the quota field of the device structure when NAPI is enabled.
*/
int pkts_to_process;
-#endif
struct net_device *dev;
mac_info_t mac_control;
struct config_param config;
@@ -775,9 +771,7 @@ struct s2io_nic {
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t tx_lock;
-#ifndef CONFIG_S2IO_NAPI
spinlock_t put_lock;
-#endif
#define PROMISC 1
#define ALL_MULTI 2
@@ -985,7 +979,7 @@ static void s2io_tasklet(unsigned long d
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
static void s2io_link(nic_t * sp, int link);
-#if defined(CONFIG_S2IO_NAPI)
+#if defined (HAVE_NETDEV_POLL)
static int s2io_poll(struct net_device *dev, int *budget);
#endif
static void s2io_init_pci(nic_t * sp);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
