On 10.05.2019 23:46, Trent Piepho wrote:
> The variables used to store u32 DT properties were signed ints. This
> doesn't work properly if the value of the property were to overflow.
> Use unsigned variables so this doesn't happen.
>
In patch 3 you added a check for DT properties being out of range.
I think this would be good also for the three properties here.
The delay values are only 4 bits wide, so you might also consider
to switch to u8 or u16.
Please note that net-next is closed currently. Please resubmit the
patches once it's open again, and please annotate them properly
with net-next.
> Cc: Andrew Lunn <and...@lunn.ch>
> Cc: Florian Fainelli <f.faine...@gmail.com>
> Cc: Heiner Kallweit <hkallwe...@gmail.com>
> Signed-off-by: Trent Piepho <tpie...@impinj.com>
> ---
> drivers/net/phy/dp83867.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
> index a46cc9427fb3..edd9e27425e8 100644
> --- a/drivers/net/phy/dp83867.c
> +++ b/drivers/net/phy/dp83867.c
> @@ -82,9 +82,9 @@ enum {
> };
>
> struct dp83867_private {
> - int rx_id_delay;
> - int tx_id_delay;
> - int fifo_depth;
> + u32 rx_id_delay;
> + u32 tx_id_delay;
> + u32 fifo_depth;
> int io_impedance;
> int port_mirroring;
> bool rxctrl_strap_quirk;
>
